Šlifavimo stalas "Splashback

Beck Absaugwand mit Spritzgerät BE AL 150/70 (2956)

Sąlyga: naujas, Thread diameter: M3 - M16 mm Infinitely variable speed, max. 187 rpm Working range: 180 - 2000 mm Motor power: 0.7 kW Hfedpfefg U Sqjx Af Isb Electric tapping machines for thread sizes M3 - M16, adjustable angle. Includes 9 quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional accessories: Clamping table with T-slots: 990x700x800 mm Magnetic base Also available for: M14 to M24 and M27 to M33.

Sąlyga: naudotas, Plate width: 2510 mm Plate depth: 5135 mm Plate height: 345 mm Weight approx. 10 t Space requirement approx. 2.5 x 5.1 x 0.38 m T-slot dimensions: 28 x 45 mm – Height: 48 mm Number of T-slots: 9 Slot spacing: 220 mm Edge distance: 240 mm Hedpfx Aehpvavof Iefb Slot size: 28 mm

Sąlyga: naudotas, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtainsider low loader, low-bed trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight rating: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and sliding tarp advanced) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle is a lift axle - Drawbar – telescopic, adjustable in several stages - Very robust lashing eyes on outer frame and vehicle center - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge €2,000 net) The vehicle was purchased new by us, i.e. from first ownership. The trailer has been deregistered since 2025. Hfodpfx Aot N Antjf Ijb

Sąlyga: naujas, Original Siegmund welding table perforated plate Octagonal, 2D or 3D 1200 x 200 mm with 28 mm holes 514 kg, diameter 1300 mm Plasma-nitrided Hfodpfx Afet Sk Ndj Ieb Original price: €8,900 Half price when purchased together with a positioner Sale only possible in combination with a positioner Hole pattern: 8 holes, 500 x 500 mm, 18 mm diameter (see photo)

Sąlyga: geras (naudotas), Gamybos metai: 2022, Stow Rėmai: Hodpfsqzhncsx Af Isfb 9000x1100x100 – 600 vnt. – 95 EUR 9500x1100x100 – 200 vnt. – 100 EUR 10000x1100x100 – 90 vnt. – 105 EUR Sijos: 2700x130 mm (3000 kg keliamoji galia) – 8744 vnt. – 11 EUR 3600x160 mm (4000 kg keliamoji galia) – 378 vnt. – 14 EUR Kojų apsaugos – 890 vnt. – 6 EUR/vnt.

Sąlyga: naujas, ⭐⭐⭐⭐⭐ (5.0) 42 reviews ✈️ Shipping available: 45-day delivery ✈️ ✅✅✅Energy Class A+++✅✅✅ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ⭐€10,850 PLUS VAT & SHIPPING⭐ ►►Buy-Now◄◄ ✳️Maintain your liquidity! We offer a wide variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ✳️ ➖➖➖➖➖ Hfsdpec Uthdsfx Af Ijb ►►►⌛⏰ FASTEST Delivery Time❗⌛⏰►►► ✨✨Buy directly from the manufacturer and benefit from our price and quality advantage!✨✨ Benefit from Proton’s 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Spray Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height: 561 [mm] ✔️Filtration system: Double-layer water curtain ✔️Filter media: mains water, panel filter, and mechanical separator with backwash ✔️Filter media cleaning: fine and coarse grating ✔️Pump capacity: 1.5 [kW/h] 940 [rpm] x 1 unit ✔️Number of fans: 1 unit ✔️Fan capacity: 5,400 m3/h x 1 ✔️Fan motor power: 3 kW/h ⭐Booths can be manufactured from galvanized sheet or stainless steel. They can be designed for integration into both automatic and manual systems. ⭐A platform is installed at the pool for material and personnel safety, covering the entire pool area. ⭐In the Wetline spray booth, environmental pollution is prevented by the simultaneous application of three different filtration systems. ⭐Wet paint particles extracted from the air by a suction fan are captured by the water curtain at the rear of the booth and transferred to the pool. ⭐Trace amounts of wet paint particles not captured by the water curtain are collected by the separators located at the suction channels behind the water curtain, with fresh air discharged through the exhaust. ⭐A backwash system is applied in the separator section to enhance the retention of moist paint particles. The filtration efficiency, increased by spraying wash water through nozzles onto the contact surface, is maximized. ⭐Paint-contaminated wastewater accumulating in the basin passes through both coarse and fine grates as it enters the pump suction chamber, preventing clogging of the pump nozzles and ensuring effective retention of paint particles. ⭐When the wastewater in the pool becomes unusable, it can be drained by using the wastewater valve located behind the grates in the suction section. ⭐By implementing a paint separator system, the water in the basin is cleaned of paint and continually reused. ⭐Separated paint residues are dewatered by using a filter press and must be disposed of properly. ⭐The listed price refers to the smallest standard size in stainless steel. All equipment/machines are new, not used. Looking for a special configuration❗ Call us now❗ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Sąlyga: naudotas, Gamybos metai: 2018, Eigos kelias - x 1.050 mm Eigos kelias - y 570 mm Eigos kelias - z 510 mm Valdiklis HEIDENHAIN - TNC620 Hfsdpfow Dgcaox Af Ijb Veleno greitis 12.000 aps./min. Įrankio tvirtinimas BT 40 Stalo matmenys (I x P): 1300 x 570 mm Įrankių keitiklio vietų skaičius: 30 Vertikalus apdirbimo centras | DOOSAN - DNM 5700, su 30 pozicijų įrankių keitikliu, vidine aušinimo sistema ir drožlių transporteriu. Staklės turi tik 13.600 veleno darbo valandų. Įrenginys yra puikios, prižiūrėtos būklės ir buvo naudotas tik aliuminiui bei plastmasėms apdirbti. Vaizdo įrašą iš gamyklos vietos galime atsiųsti pagal užklausą. Daugiau techninės informacijos rasite pasiūlyme. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Žymos: DNM5700 | DNM-5700

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, A used CNC gantry milling machine with C-axis for turning operations (CNC turning, CNC milling, and angle head machining). Boring mill work! Hirth gearing! TRAVEL DISTANCES X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max. turning height: 1,000 mm Hjdpevvh R Djfx Af Iofb Machine: Uniport 6000 Capable of boring mill operations, as well as CNC turning, CNC milling, and angle head machining—all in a single setup, combined with the speed and precision of a CNC gantry milling machine. TRAVEL DISTANCES X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max. turning height: 1,000 mm C-axis for turning operations Original price: €1.8 million Dismantling: by arrangement The machine includes a protective cover to prevent chips from entering the Hirth gearing on the slide during milling operations. It comes with a turning head for turning tools and an angle head for side machining on the plate field or on the rotary table. The angle head can be swiveled in 2.5° increments via the Hirth gearing. All tool holders (milling, turning, angle head) are clamped using HSK-100. A wireless probe from M&H (Hexagon) for measurement and zero point setting is included with the machine. The machine is operational and can be inspected on site by prior arrangement. A video of the machine is available.

Sąlyga: naudotas, Gamybos metai: 2001, Atmušos pločio: 4000 mm Atmušos aukštis: 1000 mm Išoriniai matmenys: 4600 x 1500 mm 2 x 1,5 kW varikliai Bendra nominali oro srauto apimtis: 7000 m³/h Ištraukimo jungtys dešinėje ir kairėje, 300 mm skersmens Sandėliavimo vieta: Garbsen Hfsdpfxjvvizko Af Iob

Sąlyga: naujas, Thread diameter M3 - M8 mm Electric tapping machines for threads M3 - M8, adjustable angle. Comes with 5 quick-change chucks with slip clutch. The following parameters are adjustable via display: variable speed, adjustable depth, material selection, main rotation direction, thread type selection. Optional accessories: - Clamping table with T-slots: 990x700x800 mm. - Magnetic base. Hjdpfxefg U Snj Af Isfb