Deloading sistemos

Baumann BA 7

Gamybos metai: 2006, būklė: geras (naudotas), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Inspected and tested, Kwodpsdtr A Tsfx Agfjw

Būklė: naudotas, Gamybos metai: 1988, Bobst Flexo 1604 Printing Machine, bottom printing, 4 colours, equipped with anilox cylinders 120 l/cm and 80 l/cm. Kwedpsv Ifpusfx Agfow Bobst Transfer BOBST SPO 1600 Flatbed Die Cutter, max format 1100 mm x 1600 mm / 43.3" x 63", with 4 bottom-side printing units plus MPA, sheet transport with traditional rollers. - Anilox cylinders with 120 and 80 lines - Open steel doctor blade chamber - Vacuum feeder - Die cutting section - Waste stripping section - Centerline II - High pile delivery with two lifting platforms - Max sheet size: 1100 mm x 1600 mm / 43.3" x 63" - Min sheet size: 520 mm x 600 mm / 20.5" x 23.6" - Cutting force: 400 t - Materials: E, B, C flute, CB, BE - Max speed: 6,000 sheets/hour Possibility to sell machines separately.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Techniniai duomenys: Kwedpfjxtwyfjx Agfsw Pjovimo plotis: 115 cm Elektroninis valdymas Hidraulinis spaudimas Saugos šviesos užuolaidos Tvirta, stabili konstrukcija Pilnas įrankių ir dokumentacijos komplektas

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, bendras svoris: 52 000 kg, perforavimo jėga: 600 t, reikalingas aukštis: 3 520 mm, vietos reikalavimas ilgis: 12 150 mm, reikalingas plotis: 9 340 mm, Machine for die-cutting, embossing, waste stripping, and blank separation Used machine, overhauled at QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic die-cutting, creasing, and embossing, with or without gripper edge ⦁ For stripping internal waste as well as side and rear sheet edges ⦁ For stacking the die-cut and stripped sheets in piles, with attached gripper edges, or ⦁ For separating the gripper edges and subsequently stacking the remaining sheets in piles ⦁ With a patented gripper bar register system for maximum registration accuracy ⦁ With a pile stacker that enables fully automatic separator sheet feeding and NON-STOP stacking, and does not require retooling even for the smallest cuts (change-over table with comb structure) ⦁ Separator sheet magazine with electric fill level control, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet changeover device in delivery ⦁ Modem ⦁ Standard machine height extension 600 mm Specification Maximum sheet format: 1060 x 1450 mm Minimum sheet format: 500 x 700 mm Maximum die-cutting force: 6.0 MN (600t) Speed: 8,000 sheets/hr Processable materials: Paper min. 80 g/m² Board up to 2000 g/m² Corrugated board up to 5 mm (max. sheet warp 4%) Equipment: Patented QTM rail system Manual non-stop feeder Stripping station Blank separation station Centerline Kodpfxst E Ntho Agfjww Fully automatic pallet change device in delivery Including platform Control upgraded to Siemens S7 Fully overhauled machine drive Quick-action frames in all tool stations

Būklė: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Kwedpfx Asg Ezaregfow Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Būklė: geras (naudotas), Wohlenberg 132 TS ASE papierový řezač Stroj v perfektním stavu, připravený k provozu. Rok výroby 2015. Okamžitě k dispozici ze skladu. Vybaven automatickým systémem odstraňování odřezků ASE. Řezačku lze použít jako samostatnou jednotku nebo ji integrovat do řezacích systémů. Tvorba programů probíhá v menu a zahrnuje různé řezací operace, např. jednotlivý řez, programování, vícenásobný řez, tlak bez řezání, automatický přenos skutečné hodnoty. Kwedpfx Aswt Sq Usgfow Prémiové řezací stroje Wohlenberg jsou vyráběny v Solmsu, Německo. Charakteristické vlastnosti stroje Wohlenberg: – Interaktivní uživatelské rozhraní – 18,4” dotyková obrazovka – Integrace s MIS (volitelně) – USB rozhraní – Ethernetové rozhraní – Operační systém Windows CE – Modul CIP dat – Polohování pomocí elektronického ručního kola – Optimalizovaný řezací cyklus – Programovatelný lisovací tlak – Automatické nastavení lisovacího tlaku podle šířky řezu – Automatizovaná výměna nože zepředu – Rychlá výměna nože – Nový rám stroje odlitý z jednoho kusu = vyšší stabilita – Bezúdržová elektromagnetická spojka Technické údaje: Délka řezu: 1 320 mm Maximální výška stohu: 165 mm Hloubka podávání: 1 325 mm Nejmenší řez s plechem pod lisovacím nosníkem: 77 mm Nejmenší řez bez plechu pod lisovacím nosníkem: 20 mm Maximální rychlost posuvu saní: 300 mm/s Maximální mechanická kapacita nože: 44 cyklů/min Vedení saní: nad pracovním stolem Výkon hlavního motoru: 4,5 kW Hmotnost stroje: 3 410 kg Stroj je vybaven náhradním nožem, šprycnami, lisovací deskou, dokumentací, nářadím a dopravníkem.

Būklė: naudotas, Gamybos metai: 2003, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 0 278 06 1192, plėvelės plotis: 700 mm, vynų diametras: 700 mm, Used roll slitting machine, manufacturer: Friz. One set of knives has been resharpened. The machine is pre-owned and is sold without warranty. Inspection is possible and encouraged. Kwjdpfx Aov Radxjgfew Loading facilities are available.

Gamybos metai: 2025, būklė: naujas, The RS-9 has been specifically designed for the efficient and trouble-free processing of a wide range of paper types. The parameters are customized according to the machine with which it is to be operated. The shredder enables quick and secure shredding of paper, which is taken directly from the die-cutting machine, allowing easy transport to the baler via a conveyor system. The RS-9 shredder is engineered for shredding waste from a die-cutting machine to enable easy transportation via a conveyor belt system. Our shredder is very easy to operate. It is equipped with Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 features the ability to reverse the shafts, ensuring worker safety and extending the device’s service life. The machine comes with a frequency inverter, providing soft start functionality and precise motor control. Ksdpfjiklxbex Agfeww Feel free to contact us.

Būklė: naujas, tūrio srautas: 0,984 m³/val, Atlas Copco G7FF 500 L Screw Compressor NEW Specification: • Condition – new • Manufacturer – Atlas Copco • Capacity – 984 l/min • Main motor power – 7.5 kW • Tank – 500 l • Maximum working pressure – 10.0 bar • Integrated refrigerated dryer • Electronic compressor operating parameter settings • Sound-insulated enclosure (only 67 dB) • CE compliant • User manual in Polish • Weight – 227 kg Kwedpehkttpsfx Agfow Additional information: • Manufacturer's warranty available upon commissioning by an authorized Atlas Copco service center • Available within 7 working days

Gamybos metai: 2009, būklė: paruoštas naudoti (naudotas), A flexographic printing, slotting, die-cutting and gluing line with bundle ejector (Flexo Folder Gluer) for the production and processing of corrugated board by DY Machinery is available. Processes included: feeding, printing, creasing, slotting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet feed X/Y: 1200mm/2750mm, max. print area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total machine weight: approx. 42 tons. 1) Belt feeder with vacuum, dust separator, speed display and sheet alignment device. 2) Top-side flexo printer with pull roller transmission, ink stop sensors, and automatic cleaning system. 3) Creasing and slotting unit with trim and glue flap knives; slotting knife thickness: 8mm. 4) Rotary die-cutter with polyurethane anvil and soft die-cutting system; die-cutting dimensions: +/-25mm. 5) Downfolding folding and gluing unit with VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) ACCS-2000 central control system with job storage capacity of 100,000. The entire line is equipped with remote-control capability for the flexo units, folding and gluing unit, and bundle ejector. Documentation is available. On-site inspection is possible. Expected availability: from October 2025. Kodpfx Aeu S I D Rogfjww