CNC LATHE

Baron Max KL-2680

Gamybos metai: 2010, Sąlyga: labai geros būklės (naudotas), MULTIVAC T-800 ID.NR. 2569 Multivac T-800 Durchlaufsiegelmaschine für Vakuum / Gas, ausgestattet mit 2 kompletten Werkzeugsätzen, Werkzeugwagen, Vakuumpumpe, Carsö-Wannenzuführung usw. Baujahr 2010, sehr guter Zustand! Hodpfx Aepcda Rsf Ieng Werkzeug 215 x 167 mm Nr. 2: 236 x 186 mm. Abmessungen der Linie: 800 x 100 x H 200 cm.

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) Hnodpfxeul Efmo Af Ieg - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Sąlyga: naujas,

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, veikimo valandos: 22 351 h, valdymo tipas: CNC valdymas, automatizacijos lygis: pusiau automatinis, lazdo šaltinio gamintojas: Trumpf, lazero valandos: 17 317 h, lazerio galia: 4 000 W, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, nerūdijančio plieno lakšto storis (maks.): 15 mm, aliuminio lakšto storis (maks.): 10 mm, darbinis ilgis: 3 000 mm, darbinis plotis: 1 500 mm, Z ašies eigos atstumas: 115 mm, kartojimo tikslumas: 0,03 mm, aušinimo tipas: vanduo, bendras svoris: 12 000 kg, Įranga: CE žymėjimas, apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, dokumentacija / vadovas, dulkių šalinimas, Parduodama: TRUMPF TruLaser 3030 su LoadMaster automatizacija Įrenginys sumontuotas 2021 m. birželį. Aptarnautas tik TRUMPF Slovakia, profesionali priežiūra atliekama kas pusę metų. Įrenginys puikios būklės, su LoadMaster automatizacija. Hnsdjwya Twjpfx Af Ijg Lakštų pjovimas iki 25 mm storio. Rezonatoriaus tipas ir galia: CO₂, 4 kW. Maksimalus darbinis plotas: 3000 × 1500 mm. Įranga veiks iki 2025 m. gruodžio pabaigos, galima apžiūrėti bet kada visiškai veikiančią. Pateikiama pilna serviso istorijos dokumentacija.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 52 455 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2501-0154, tekėjimo ilgis: 600 mm, sukimosi skersmuo virš skersinio stumduko: 140 mm, tekėjimo skersmuo: 300 mm, ašies variklio galia: 25 000 W, veleno greitis (min.): 5 000 aps./min, veleno greitis (maks.): 5 000 aps./min, Z ašies eigos atstumas: 900 mm, greitas poslinkis X ašimi: 3 m/min, greitas poslinkis Y ašis: 3 m/min, greitasis eiga Z ašyje: 3 m/min, sukimosi greitis (maks.): 4 000 aps./min, sukimosi greitis (min.): 4 000 aps./min, sukimo momentas: 239 Nm, strypo praėjimas: 80 mm, X ašies padavimo greitis: 165 m/min, Y ašies padavimo greitis: 165 m/min, padavimo greitis Z ašis: 220 m/min, bendras svoris: 10 500 kg, Įranga: dokumentacija / vadovas, The machine is still in use and can be viewed in operation at VOVU Machining in Uden. A total of 6 identical machines are available here. Equipped with Fanuc 310iS control. Hnjdpsur Hfzjfx Af Iog

Sąlyga: naudotas, Gamybos metai: 2016, Overview This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition, and shows only minimal signs of use. The plant is still installed and connected, and can therefore be inspected in person at any time. Technical Data - Capacity: 60 bags/minute - Doypack/flat pouch formats: 20/25g, 50g, 300g, 500g, 750g Hnjdjtz H T Depfx Af Ijg - Capability for micro-dosing of powders - Modern wide zipper/belt Scope of Delivery - Doypack packaging machine | Volpak | SI-280 F1 - Multihead weigher | Ishida | CCW-RV-228-S/05-SS - 4 raw material discharge stations - Lindor mixer - Cox & Plant dosing system between discharge stations, mixer, and multihead weigher - Ishida x-ray inspection system with reject, IX-GA-4075 - Ishida dynamic checkweigher with DACS-G-S0 reject - System for the injection of nitrogen or another inert gas, including a metering system - Dust extraction system - Euro hole punch - Smooth sealing system

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, BAGGING, PALLETIZING, AND WRAPPING LINE Comprising: AUTOMATIC BAGGING MACHINE for plastic film sack forming and filling. Brand: "INNO TECH". Maximum film width: 1300 mm (currently operating with 960 mm film). Includes 2 forming tubes, automatic weighing scale, discharge conveyor, and frame. ROBOT Brand: "ABB PALLETIZER", Model "ABB IRB M 2000 KGS". Sack loading tray and pallet placing system. ROLLER CONVEYOR. ROTARY TABLE, movable on rails. ARM WRAPPER/STRETCH WRAPPER, Brand: "IMPROPACK TORNAJET". Equipped with outfeed roller conveyors. Total price: 75,000 euros Components can be sold separately. Hnodpfsttll Rex Af Ijg EXCELLENT CONDITION!! Location: Cantabria - SPAIN

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Condition of the machine is very good, it has performed only 123,000 operations. CNC-controlled automatic machine, designed for processing welded frames. Independent drive and control system. Multiple use of the same processing time Operates in a welding and cleaning line Does not require additional floor space in the hall Can be adapted to work in a sash production line All operations are performed during the cooling phase: Hjdpfjm Ak R Uox Af Iong drainage vent grooves vent holes in colored profiles drilling of frame for mullion connector drilling of holes in the frame for hinges (x6) The center has its own frame transportation system from welder to cleaner SPS, NC control User-friendly visualization

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1994, spaudimo jėga: 80 t, Įranga: apsaugos šviesos užtvara, Manufacturer: Amada Model: ITS 80-25 Hnsdpfx Aovncifef Ijg Year of manufacture: 1994 Pressing force: 80 t Bending length: 2500 mm Throat depth: 400 mm Stroke: 100 mm Power: 9.5 kW Overall dimensions: 3010 x 2230 x 2230 mm Weight: 4,950 kg

Sąlyga: naudotas, Automatinė mašina polietileninių maišelių (marškinėlių ar pirkinių maišelių) gamybai Gamintojas: COSMO Modelis: ST-99 Hedporww E Ijfx Af Ijng Maišelio dydis: - ilgis: 350 - 650 mm - plotis: 160 - 365 mm - storis: 0,008 - 0,05 mm Našumas: 180 - 300 vnt./min Įdiegta galia: 12 kW Maitinimas: 230 V, 3 fazės, 50/60 Hz Išmatavimai: 7150 x 1600 x 1750 mm Papildomai reikalingas oro kompresorius: 10 AG – komplekte nėra Techninė būklė: naudota mašina