Klijų barstytuvas

Barberan MEN-H-1600

Būklė: geras (naudotas), Gamybos metai: 2017, In this offer, you are purchasing used office furniture in good condition. The items were delivered in 2017 and are generally in very good condition due to minimal use. Items for sale: We also offer workstation sets for €450 each. 1x Desk - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey tabletop - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - Armrests - Fully adjustable - Upholstery: Polo fabric in grey/black 1x Mobile Pedestal - Manufacturer: FM - 43.4 x 80 x 59 cm - One stationary tray drawer - 3 steel drawers with soft-close function - Lockable, including key Desks: • Approx. 10x desk from manufacturer FM, 1600 x 800 x 680–760 mm (continuously height adjustable), colour: light grey. Frame made of aluminium • Approx. 10x folding desk (can be used as desk), 1600 x 800 x 720 mm on castors, colour: light grey. Frame made of aluminium • Approx. 2x round meeting table, 1000 mm diameter, colour: light grey. Frame made of aluminium • Approx. 4x high table, 1600 x 800 x 1300 mm, colour: arctic white. Frame in white, made of aluminium Chairs: • Approx. 10x Dauphin MagicShapeS elan swivel chair with armrests, fully adjustable. Fabric upholstery Polo black, black plastic base • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red. Chrome metal frame. • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue. Chrome metal frame. • Approx. 10x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstered in black. Frame in silver. • Approx. 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstered in ocean blue. Frame in silver. • 12x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstered in red. Frame in silver. • 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstered in ruby red. Frame in silver. Hnsdpfoiiv Ikex Admok Storage: • Approx. 16x mobile pedestal by FM 434 x 800 x 590 mm, with one stationary tray drawer and 3 steel drawers. Body in full light grey. Aluminium handles. Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on quantity purchased. We are happy to provide you with a tailored offer. Each piece of furniture can also be purchased individually. Condition: These are used items and may show signs of wear such as minor scratches or discoloration. Packaging and Shipping: You are welcome to view all items during our business hours. Please schedule an appointment in advance! Sea-worthy packaging and worldwide shipping available on request! For more information, please feel free to contact us directly.

Būklė: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 001669, Lg 33121 Single-sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Max. strip width: 600 mm Max. load capacity: 3,000 kg Max. coil outer diameter: 1,800 mm Expansion: hydraulic Pressure arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading station + decoiler traversing device Includes: Lg 33221 Hedpfx Adehigmbsmsnk High-Performance Precision Leveler LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Max. pass-through width: 620 mm Number of leveling rollers: 9 Leveling roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Leveling rollers are multi-supported to prevent deflection All rollers driven by distribution gearbox and cardan shafts. Used, as-is ex-stock, immediately available. Refurbishment available upon request. Delivery time as agreed. Further data coming soon or available on request.

Gamybos metai: 2001, veikimo valandos: 123 h, būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 123, Chip silo, diameter: 5 m, height: approx. 8 m, net capacity: 42 m³. Suitable for the storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time, by prior arrangement. Hnodpfxeftdv Uj Admsk

Būklė: naudotas, Gamybos metai: 2016, Vitap Eclipse Kantenanleimmaschine für runde und geschwungene Werkstücke Halbautomatische Kantenanleimmaschine für große, runde oder gebogene Werkstücke mit einer Plattenstärke von 10 bis 60 mm und einer Kantenbandstärke von 1 bis 3 mm. Hnedpewgb Hxefx Admsk Die maximale Werkstückhöhe von 60 mm ist nur bei einer Kantenbandstärke von 1 mm möglich. Ist das Kantenband dicker, hängt dies von der Bandqualität ab und muss im Zusammenhang mit dem Schneidaggregat vorher getestet werden. Beschreibung: - Zwei Abtastrollen zur Erfassung der Werkstückkontur - Leimauftragsstation - Leimwanne mit 1 kg Fassungsvermögen - Zwei 800W-Heizelemente mit elektronischer Temperaturanzeige über die SPS - Leimauftrag über Leimwalze - Leimwanne aus Aluminium für optimale Wärmeverteilung - Leimzufuhr über Einstellknopf regulierbar - Automatische Schneidvorrichtung für Kantenmaterial von der Rolle (3 bis 45 mm) - Aggregat wird bei geschlossenen Kanten automatisch per Sensor für perfekte Verbindung oder per Encoder bei einseitiger Bekantung aktiviert - Lasersystem zur Längenermittlung, kein vorheriges Vermessen notwendig - Ein-/Ausschaltfunktion für Durchlaufbetrieb - Höhenverstellbarer Tisch für schmale Platten - Ein-/Ausschaltfunktion für das Fräsaggregat - Zwei Abtastrollen zur Formabtastung des Werkstücks - Fräsaggregat mit 2 x 0,5 kW (15.000 U/min Hochfrequenz) und oberen, unteren sowie frontalen Abtastrollen - Fräsaggregat mit Messern: Radius R=2, Phase 15°, Durchmesser D=69, Anzahl Z=6 - Großes Plattendrehtisch mit Vakuumsystem zur Fixierung des Werkstücks (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden De beste gebruikte machines uit Nederland

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, lazerio galia: 4 000 W, IMMEDIATELY AVAILABLE: TRUMPF Trumatic L 3030 – 4 kW – Year 2006 TECHNICAL DATA: Manufacturer: TRUMPF Model: L 3030 – 4 kW Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm CNC Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness mild steel: 20 mm Max. sheet thickness stainless steel: 15 mm Max. sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Hsdpfxeuthz Tj Admjnk Transmitting tube: new in 2024 TASC laser control: new in 2022 Driver stage: replaced in 2018 Magnetic bearing electronics: new in 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servo motors - Quick-change cutting head system - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - Automatic focus position setting AutoLas Plus - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for making small holes - PMS plasma sensor technology - Automatic sheet metal edge detection - Programmable power cycles - Microweld - Automatic shut-off - Work area lighting - Sinumerik 840D control: open PC-based control, easy operation, online help, integrated e-Shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light curtains, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color monitor - Electrical equipment: Voltage 400 V / 50 Hz - Paintwork: Standard RAL 9002/5010 ADDITIONAL EQUIPMENT: - Laser TLF 4000 incl. lens monitoring sensor - PCS Process Control System

Gamybos metai: 1993, būklė: naudotas, • Working width (mm): 2200 • Motor power (kW): 22 Hnjdpfx Aen I Twyedmok • Upper rollers: with PU rings • Lower rollers: knurled • Saw shaft: included

Gamybos metai: 2000, būklė: geras (naudotas), Barberan Laminating Line For all inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum element length: approx. 600 mm Continuously adjustable speed from the brushing machine, maximum speed: 20 m/min. Hnjdpoilqvrofx Admok The line includes: - Tommassini automatic loader (not operational) - Top and bottom brushing machine - Pre-heating lamps for the top and bottom glue rollers - PVAC glue applicator - Additional top and bottom drying lamps - Steel calender line for pressing - Additionally, the line is equipped with a purchased corona treatment unit for the upper surface (functional) – allows for single-side laminating with PP films

Būklė: naudotas, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for single parts with rinse cycle. ----- Function features: Machine for horizontal flooding of single parts. The product is applied via a row of nozzles. Excess product is blown off by air jets. The pump and the air jets are automatically controlled and are only activated when a workpiece is passing through. This reduces compressed air consumption. The recirculation mode ensures minimal product usage. ----- Construction features: Structure Robust steel frame, painted with high-strength, water-soluble products. Machine body made of thick, hot-welded polypropylene panels. 4 independent chambers for infeed, flooding, blowing, and outfeed. Horizontal workpiece feed Via motor-driven grooved plastic rollers. Electric inverter for adjusting and changing the feed speed. Transmission The machine is equipped with an exclusive system that positions all transmission components outside the flooding chamber for easy operator access, ensuring longer operating life and facilitating maintenance operations. Moving components are protected by covers and appropriate seals. Recirculation pump Pneumatic double diaphragm pump with valves, seals, and diaphragms made of nitrile rubber, and a housing made of plastic material (PVDF). Air jets The first chamber features an air-blow system to prevent product leakage. A second air-blow system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for setting the feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3–6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be impregnated mm 250 Max. width of workpieces to be impregnated mm 300 Hjdponl Nqqefx Admonk Max. height of workpieces to be impregnated mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinse circuit for Pro Flow ----- Price of the above machine: on request! Plus packaging and transport ----- (Technical specifications as per manufacturer – without guarantee! Illustrations may differ from the original, prices net, plus VAT (domestic))

Būklė: geras (naudotas), Gamybos metai: 2020, Masterwood Project 351 L 3-Achs CNC-Bearbeitungszentrum Beschreibung: Luftgekühlte 3-Achs-Frässpindel 17,5 PS (HSK-63F) Statischer Frequenzumrichter für programmierbare Drehzahl 1.500–24.000 U/min Werkzeugwechsler mit 22 Positionen 6 pneumatische, absenkbare Werkstückanschläge zur Beladung/Positionierung schwerer Werkstücke Vorbereitet für die Montage von Spannvorrichtungen 2 horizontale Spannzangen für Balkenholz 6 Nullpunkte entlang der X-Achse (Positionierung der Werkstücke an der Rückseite der Auflagen) 8 Nullpunkte entlang der X-Achse (Positionierung der Werkstücke mittig auf den Auflagen) Komplette Referenzierung rechts entlang der Y-Achse Komplette Referenzierung links entlang der Y-Achse 2 Arbeitsfelder 1 x 100m³ Vakuumpumpe 24 Vakuumsauger Handbediengerät mit digitaler Anzeige Automatisches Werkzeugvermessungssystem Abförderband für Restmaterial Bohraggregat mit 19 Spindeln (32 mm Teilung), 2,2 kW: - 7 Vertikalbohrspindeln in X-Richtung - 6 Vertikalbohrspindeln in Y-Richtung - 4 Horizontalbohrspindeln in Y-Richtung - 2 Horizontalbohrspindeln in X-Richtung (Alle Bohrspindeln einzeln programmierbar) Steuereinheit mit PC SINCRO CAD/CAM MASTERWORK Software Technische Daten: Bearbeitungsbereich X-Achse: 5.130 mm Bearbeitungsbereich Y-Achse: 1.550 mm Verfahrgeschwindigkeit X/Y: 80 m/min Verfahrgeschwindigkeit Z: 25 m/min Max. Werkstückdicke: 200 mm Fräsmotorleistung: 17,5 PS (S1) Fräsmotordrehzahl: 1.500–24.000 U/min Bohraggregat: 3 PS Werkzeugaufnahmesystem: HSK63-F Werkzeugwechsler: 22 Positionen Vakuumpumpe: 100m³ Absaugstutzen: 250 mm Luftfördermenge: 4.500 m³/h Luftgeschwindigkeit: 30 m/s Betriebsdruck: 7 bar Druckluftverbrauch: 300–500 l/min Sicherungswert: 40 A Hnsdpfx Adsvu U Itjmsk Maschinengewicht: 7.000 kg Alle Änderungen, Irrtümer und Zwischenverkauf vorbehalten! Keine Gewähr für die Richtigkeit der Angaben. Die besten Holzbearbeitungsmaschinen aus den Niederlanden.

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Hnsdefxpbmepfx Admjk