Kaiščių gręžimo staklės

Ayen UBM 19

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1984, 1 milling unit 2.8/3.5 kW Rated current 6.4/9.3 A Lhjdega Tu Dspfx Af Ijb Maximum workpiece thickness 130 mm Side table for router operations

Sąlyga: naujas, Gamybos metai: 2024, Genie Z34/22 IC diesel articulated telescopic boom lift, new, used, and demo machines available Lhsdpernqq Hjfx Af Iob

Sąlyga: geras (naudotas), Gamybos metai: 2002, veikimo valandos: 5 900 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 74343, darbinis plotis: 1 350 mm, šlifavimo juostos ilgis: 2 620 mm, šlifavimo juostos plotis: 1 370 mm, Plataus juostos šlifavimo staklės Bütfering Optimat SBC 313 Pagaminimo metai: 2002 Modelis: Optimat SBC 313/QCE/Classic - Su 3 agregatais (aprašymas pateiktas nuotraukoje) - Šlifavimas iš viršaus Darbinis plotis: 1350 mm Šlifavimo juostos plotis: 1370 mm Šlifavimo juostos ilgis: 2620 mm Skersinės juostos plotis: 150 mm Skersinės juostos ilgis: 4700 mm Ledpfx Asqvl D Hsf Iehb Daugiau informacijos nuotraukose.

Sąlyga: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Ledpfsgwbbqjx Af Iehb Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 700 kg, bendras ilgis: 2 860 mm, bendras plotis: 1 230 mm, statybinis aukštis: 1 700 mm, Pilnai veikiantis parodinis džiovintuvas, Ø 1090 mm Siūlome savo pilnai veikiantį parodinį džiovintuvą, kurio skersmuo 1090 mm. Įrenginys yra labai kompaktiškas ir praktiškas tiek vietos poreikio, tiek paprasto perkėlimo atžvilgiu. Techninės detalės: Prijungimas: reikalingas tik vandens prijungimas purškimui ir 16A trifazė kištukinė jungtis Šildymo sistema: 4 kW elektrinis šildytuvas Lhsdpfx Afoxbz Hrj Ieb Medienos drėgmės matavimas 3 taškuose Pilnai paruoštas naudojimui – iš karto tinkamas darbui Privalumai: Idealiai tinka mažoms stalių dirbtuvėms Lengvai transportuojamas ir lankstus pastatymo atžvilgiu

Sąlyga: naudotas, Gamybos metai: 2009, Busellato JET Optima C1 CNC Maschine Beschreibung Manuelle zentrale Schmierung Zusätzliches 4-fach Vakuumspannsystem Zentralisierte Absaughaube mit Ventilen Teleservice-Modem für Fernwartung Sicherheitsüberwachungssystem 2 Arbeitsbereiche + 6-Balken-Konsolen, 1250 mm Kapazität 4-Balken-Hubvorrichtung Zusatz-Kit: Scheibengerät für Furnierplatten, zur Montage am Null-Linien-Referenzanschlag Vakuum-Sauger-Laservorrichtung Vakuumpumpe 100 m³/h Bohrkopf mit 18 Bohrern und Sägeblatt HSK Elektrospindel, 11 kW 8-fach Linearwechsler am Träger, verfahrbar in X-Richtung mit Elektrospindel Ljdpfx Afevw Uh Ss Iehb Fester Zusatzplatz für Aggregatwerkzeughalter Doppel-Null-Linien Zusatzvorrichtung: 360° CNC für Elektrospindel (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Gamybos metai: 2012, Sąlyga: geras (naudotas), Medium-pressure conveying system for wood chips Approx. 4 tons per hour Conveyor pipeline originally 180 m, 150 mm diameter, partially available Air capacity approx. 2,350 m³/h Motor power: three-phase motor according to IEC, 55 kW Protection class: IP54 1 housing made of high-quality cast iron, equipped with two axially parallel and centrally arranged, dynamically balanced rotary pistons, with hardened and ground, helical precision timing gears, each mounted in roller bearings. Drives via V-belts, including both pulleys and associated high-performance narrow V-belts, as well as a protective cover. 1 drive unit with motor tensioning rails, shaft connection with installation-friendly taper-lock bushings, fully mounted on a common base frame. 1 combined intake filter and sound absorber (absorption damper) 1 resonance absorption pressure sound absorber, base frame version 1 base frame 1 pressure relief valve 1 non-return flap 1 flexible coupling sleeve with clamps 1 manometer Ljdpfx Ajb Uyizef Iohb 1 set of vibration isolators with mounting bolts 1 electrical pressure monitoring system consisting of pressure transmitter and display-device, as well as electrical output signal 1 sound enclosure made of galvanized sheet steel with oil drip tray and ceiling coating RAL 5001, segment design with internal lining and forced ventilation, blower fan wheel driven by the blower shaft. Sound enclosure suitable for outdoor installation.

Sąlyga: naudotas, Gamybos metai: 1992, Number of spindles in row: 16 Lhsdpfxjwv Nb No Af Iob Number of horizontal spindles: 5 Cup hinge boring head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swiveling

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Tread milling machine SELECT 20800 for recessing treads and risers into stair stringers and posts. The machine is equipped with stops for tread length, tread thickness, riser length, riser thickness, and nosing dimension. Both a tread and a riser can be milled in a single clamping operation in approximately 1 minute. Lodswut Abspfx Af Ijhb Workpieces can be clamped in just one second. This machine is the ideal solution for professional staircase manufacturers. Power supply: 3-phase, 400 V. Maximum clamping height: 300 mm.

Sąlyga: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Lhsdpfx Afjvwbp Ae Ieb