Stacionarus atliekų tankintuvas Nr. 04

Avermann SP-12

Sąlyga: paruoštas naudoti (naudotas), Modelis: HSM V-press 1160 plus presavimo įrenginys Tjdora Nyuepfx Ag Ref Spaudimas (kN): 532 Našumas (balių/val.): 1–2 Maks. baliaus dydis (mm): 1200x1100x1000-1200 Matmenys (ilgis x plotis x aukštis, mm): 1780x1150x2985 Galia (kW): 7,5 Metai 2007-2008 kaina 5500 eur Metai 2009-2010 kaina 5800 eur Metai 2011-2013 kaina 6300 eur Taip pat turime HSM v press 1160 max presavimo įrenginių 2014-2015 metų Svoris (kg): 2300 TAIP PAT PASIEKIAMI 2017-2018 METŲ MODELIAI – 7500 eur

Gamybos metai: 2008, veikimo valandos: 40 000 h, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: HBC 140 2x75kW 2008 (00191), Verkauft durch Bollegraaf Recycling Solutions, dem Originalhersteller dieser Bollegraaf Ballenpresse und Förderband: Bollegraaf HBC140s Ballenpresse (2x75kW). Ballenpresse: Gewicht: 47.100 kg Baujahr: 2008 Nur mit Hardox-Bodenblech ausgestattet Variable Kanal-Druckregelung Kunststoffventil Hydraulikpumpe über Frequenzumrichter angetrieben Nagetiere-abweisende Verkabelung Tiefenfiltration des Hydrauliköls Modem Betriebsstunden: 40.000 Diese Ballenpresse kann auch vollständig nach den 'Bollegraaf OEM Certified Refurbishment Standards' generalüberholt verkauft werden. Dies beinhaltet 2 Jahre Garantie. Kontaktieren Sie uns für weitere Informationen oder ein Angebot. Allgemeine Prinzipien der Generalüberholung: Reinigung & Demontage Vor Beginn der Überholung wird die Ballenpresse in unserer Werkstatt vollständig gereinigt und zerlegt. Toleranzen Nach der Demontage werden die Toleranzen aller Stahlkomponenten gemessen und wo nötig nachgeschweißt. Dies gilt mindestens für folgende Komponenten: • Pressstempel (Ram) • Rahmen • Kanal • Vorpressklappe Nach Demontage und Inspektion wird der Pressstempel nachgeschweißt und mit neuen Stempelrädern ausgestattet. Die Schutzgitter und die Vorpressklappe werden ausgedellt und falls erforderlich instandgesetzt. Neulackierung Todpfx Agskcgf Ho Rjf Nach der Toleranzmessung und eventuellen Reparatur- und Schweißarbeiten werden alle Komponenten gestrahlt und neu beschichtet. Hydraulik: Der Hydrauliktank wird gereinigt. Alle Hydraulikleitungen und -schläuche werden ersetzt. Die hydraulischen Komponenten werden neu abgedichtet. Das Hydrauliköl wird ersetzt. Verkabelung: Alle Kabel werden überprüft und ggf. ersetzt. Alle Verteilerdosen werden erneuert und an gut zugänglichen Stellen montiert. Verschleißteile: Alle Verschleißteile werden ersetzt. Die Bolzen und Wellen der Zylinder sowie des Kanals werden erneuert. Alle Verschleißteile der Nadelinstallationen und Knoter werden ersetzt. Zylinder: Die Zylinder werden neu abgedichtet und – falls notwendig – mit einer neuen Chromschicht oder Kolbenstange versehen. MCC-Schaltschrank: Der Schaltschrank wird überprüft und gereinigt. Elektronische Bauteile werden falls erforderlich erneuert. Die SPS und das HMI (Bedienpanel) werden durch die neueste Schneider M340 Version inkl. neuester Software ersetzt.

Gamybos metai: 2012, Sąlyga: geras (naudotas), Manufacturer: Gipo AG Model: B 1370 Year of manufacture: 2012 Feed opening: 1,320 x 680 mm Included: - Frame - Pre-screen - Electric motors for crusher and pre-screen. Spare jaws in stock! Tjdpfx Aeilh Efsg Rjf

Sąlyga: nepatikrintas (naudotas), Hydraulic press for pressing paper and similar materials. The machine was fully operational prior to disassembly. Tjdpfx Agjh Nyfyj Ref Press dimensions: Length: 4850 mm, width: 1370 mm, height: 3000 mm (reducible to 2300 mm). Weight approx. 3500 - 4000 kg. For further information, please contact: +48 539 660 495.

Sąlyga: paruoštas naudoti (naudotas), Kūginis smulkintuvas Svedala Prekės ženklas: Svedala Tipas: 36/H/MC Tedpfx Aopn I H Tog Ref Įsk.: pagrindinis važiuoklės rėmas ir alyvos blokas

Gamybos metai: 2024, Sąlyga: naujas, Overview – of the various configurations *not every position is needed: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstration unit with discharge (only shown schematically in the image) *optional, if feeding with wheel loader is desired Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4 m Four sieves are mounted on the underside, which are extracted. Unit price net from: €9,750 - Extraction components / hoses flat rate €945 net - Control system for entire plant Unit price net: €2,750 - Demonstration extraction unit MMJET 160 demo, with cleaning function Connection 160, Fan 2.2 kW Air capacity 1850 m³/400 V automatic compressed air cleaning Unit price net from: €6,950 - Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour at +/- 20 kg tfrom €59,995 net *A reference system (baler) is located at ZIP code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height adaptable upon request) Weight of bale +/- 20 kg (depending on material) Capacity: approx. 30 bales per hour Storage bin approx. 0.7 m³ volume Fill level sensors for min./max. fill level in the bin Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale ejection Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 kg mütek balers / packaging machines were developed for producing bales from various materials such as shredded miscanthus or elephant grass, wood shavings, sawdust, and shredded straw. The machine features robust construction, ensuring consistent quality during continuous operation. The baler compresses the material filled in the storage bin without any additional binding agents by means of hydraulic pressure and packs the material in plastic bags. The machine allows significant volume reduction, depending on the material. Maximum material moisture must not exceed 18% Atro. The mütek baler’s container can be filled automatically or manually and has a capacity of approx. 0.7 m³. Containers with larger volume or with integrated extraction and filter systems as a complete disposal unit are also available. In addition to automatic filling via de-dusting units, mütek also offers filling by means of screw conveyors. Both variants allow automatic dedusting. mütek balers are equipped with a control cabinet for system management. In the standard version, bale dimensions (width x depth x height) are 400 x 400 x 800 mm. Upon request, height can be adapted to your requirements. The following advantages result from baling: - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Raw material requirements: - dry (max. 30% ATRO) Tjdpfx Agjff Sbij Rjf - max. 35 mm length

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Tjdpfx Aovwlqqjg Rsf Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Gamybos metai: 1982, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 14320, Baler / Paper Baler Tsdpeiuky Isfx Ag Rof

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1991, | Modelis | Lokomo C-140B žnyplinis trupintuvas | | Įvado anga (plotis × aukštis) | apie 1400 mm × 1000 mm | | Didžiausias smulkinimo dydis | apie 600–800 mm | Todexcg Spjpfx Ag Ref | Smulkinamos medžiagos stiprumas (pvz., uoliena) | ~200 MPa (labai priklauso nuo medžiagos) | | Pajėgumas (pralaidumas) | apie 400 t/val | | Variklio galia | 200 kW | | Svorio intervalas | 55 tonos |

Sąlyga: paruoštas naudoti (naudotas), Presavimoji Hsm HL 4809 LI - Didelė užpildymo anga, idealiai tinka didelėms dėžėms - Konteinerio vartymo įtaisas patogiam užpildymui Tedpfera Dddjx Ag Rof Jėga kN: 480 - Įtampa/dažnis: 3 x 400 V / 50 Hz - Balo svoris kg (priklausomai nuo medžiagos): iki 400 kg - Balo matmenys ilgis x plotis x aukštis mm: 1200 x 1100 x 750 - Įrenginio matmenys ilgis x plotis x aukštis mm: 5648 x 1849 x 2515 Tuščios eigos ciklo laikas sekundėmis: 53 - Rankinis surišimas: 4 kartus viela