Dviejų velenų medienos komponentų frezavimo staklės

AUER BL-100

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, Wide-belt sander DMC USK 1350 M3 – Made in Italy – Cross-belt unit (so-called 'sergeant') – Year of manufacture: 2011 – Electric and pneumatic ionizer TECHNICAL SPECIFICATIONS: Sanding width: 1350 mm Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st unit: Cross-belt (so-called 'sergeant') Motor power: 12 kW 2nd unit: Rubber roller Hardness: 95 Shore Diameter: 240 mm Motor power: 18.5 kW 3rd unit: Rubber roller Hardness: 55 Shore Roller diameter: 300 mm Motor power: 15 kW 4th unit: Pneumatic pad Nodpfxogr Er Ss Adueli Motor power: 15 kW 5th unit – Cleaning brush – 2.2 kW 6th unit – Air blower Blower for the belt Pneumatic oscillation Feed speed: 2.5 – 18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Nedpfx Aju Uh T Dodujli Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: naudotas, Gamybos metai: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) - Max. working width: 260 mm - Max. working height: 160 mm - Number of spindles: 6 1st spindle: bottom - Spindle diameter: 40 mm - Clamping length: 270 mm Nedpfx Aewwwkhsdusli - Speed: 6000 rpm - Motor power: 11.0 kW 2nd spindle: right - Spindle diameter: 40 mm - Clamping length: 170 mm - Speed: 6000 rpm - Motor power: 11.0 kW (shared with left spindle) 3rd spindle: left - Spindle diameter: 40 mm - Clamping length: 170 mm - Speed: 6000 rpm 4th spindle: top - Spindle diameter: 40 mm - Clamping length: 270 mm - Speed: 6000 rpm - Motor power: 11.0 kW 5th spindle: bottom - Spindle diameter: 40 mm - Motor power: 11.0 kW - Speed: 6000 rpm - Clamping length: 270 mm 6th spindle: top, chamfering unit - Motor brakes: mechanical - Vertical adjustment of the upper spindle: electric - Optional with/without feed - Feed brake system: Yes - Feed speed, infinitely variable: 3 – 23 m/min - Feed roller pressure: pneumatic - Feed power: 4.0 kW - Feed drive: Cardan shaft - Lubrication pump: manual - Max. jointing depth: 10 mm - Jointing rebate cutter on jointer: Yes - Driven rollers in table: 1 - Control type: PLC control - Spindle position display: mechanical numeric indicator - Feed rollers before jointer: Yes - Air cushion table: three tracks - Central lubrication point: Yes Description: short infeed table 1050 mm with interior light Location: Nattheim

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis plotis: 260 mm, obliavimo aukštis: 170 mm, ašies skersmuo: 40 mm, obliavimo plotis: 260 mm, darbinio aukščio: 170 mm, padavimo variklio galia: 4 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, ašies skaičius: 5, įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Profimat 23 E Darbinis plotis: 260 mm, Darbinis aukštis: 170 mm, 5 velenai, Veleno skersmuo: 40 mm, Velenų išdėstymas: 1- Apačia – 5,5 kW 2- Dešinė + 3- Kairė – 11 kW 4- Viršus – 5,5 kW 5- Apačia – 11 kW Padavimo greitis: 6 – 24 m/min - 4 kW Nodpfx Adsvgnb Roujli Oro pagalvė stalo viduje Viena varoma ritinėlis išėjimo stalo dalyje. Su įrankiais.

Sąlyga: naudotas, Gamybos metai: 1980, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, maximum cutting height 200 mm belt width 350 mm 2 motors, 37 kW each Nedpev Rf N Hjfx Adusli max. blade diameter 300 mm new automatic lubrication system with electric pump dimensions (L/W/H): 3000 x 2300 x 1900 mm weight approx. 5000 kg Comes with extensive accessories, saw blades, bushings, spacer rings

Sąlyga: labai geros būklės (naudotas), Planer 9 Köpfe Arbeitsbreite: 20 cm Arbeitshöhe: 22 cm 5 Ziehwalzen im Tisch Köpfe: 1 unten – 7,5 kW 2 rechts – 11 kW 3 oben – 11 kW 4 rechts – 11 kW 5 oben – 11 kW 6 unten – 11 kW 7 oben – 11 kW 8 unten – 11 kW 9 universal – 11 kW Nsdpetrdwtsfx Adueli PERFEKTER ZUSTAND!

Sąlyga: geras (naudotas), Weinig Hydromat H23 Ø 50 mm špindeliai, 6 000 aps./min. Apatinis 15 kW obliavimo mazgas (paruoštas) Dešinysis 11 kW obliavimo mazgas (paruoštas) Kairysis 11 kW obliavimo mazgas (paruoštas) Dešinysis 11 kW obliavimo mazgas (paruoštas) Nsdpfxjwmw Nvo Adujli Kairysis 11 kW obliavimo mazgas (paruoštas) Viršutinis 15 kW obliavimo mazgas (paruoštas) Apatinis 11 kW obliavimo mazgas (paruoštas, tiesinis obliatorius) su išoriniu guoliu Viršutinis 11 kW obliavimo mazgas (paruoštas, tiesinis obliatorius) su išoriniu guoliu Apatinis 15 kW obliavimo mazgas (paruoštas) Galima pridėti papildomų tiesinių / profiliavimo obliatorių pagal poreikį! 15 kW padavimo variklis. Automatinė tepimo sistema. Galime pasiūlyti įvado ir išvado konvejerius pagal poreikius. Taip pat galimas įrankių pasiūlymas.

Sąlyga: naudotas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table crosscut saw ----- Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, max. height: 100 mm. The frame is entirely constructed from thick-walled, reinforced, fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Two-hand safety cutting control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustments for adaptation to different processing types. Durable and easily replaceable saw blade guide bar. TCT circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Pressing system operates via innovative ball bearings with dual dust protection and automatic lubrication system. CE-compliant electrical system. CE-certified models must be equipped as standard with infeed and outfeed support tables/roller conveyors of at least 1 meter in length. Technical Specifications: Nodov Uq Tljpfx Adujli ----- Maximum cutting cross section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: TCT Z=108 Saw blade speed: 2800 rpm Air consumption per cycle: 5 Nl Extraction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400 V / 50 Hz, 3-phase Working table height: 900 mm ± 20 mm Color tone: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide, stop guide, and millimeter scale. 2 robust pneumatic stops, width 200 mm ----- Total price ex works: on request! ----- Pictures and video not original; show an identical model. Additional options (e.g., longer infeed/outfeed tables, stop systems) available on request! (Technical data according to manufacturer's information—subject to change!)

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Darbinis plotis: 230 mm, darbinis aukštis: 160 mm, velenų skaičius: 5, veleno diametras: 50 mm, veleno galia: 4x 5,5 kW / 2x 11 kW, padavimas: 24 m/min, padavimo stalo ilgis: 3000 mm, vertikalaus veleno ašinė eiga: 80 mm, horizontalaus veleno ašinė eiga: 45 mm. Bendras pajungimo galingumas: 126 kW, oro poreikis: 8400–9600 m³/val., staklių matmenys (X/Y/Z): apie 3500 mm / 2000 mm / 1800 mm, svoris: apie 3500 kg. Į komplektą įeina Weinig EM-11 įstūmimo įrenginys ir tinkamas ištraukimo paskirstytuvas. Dokumentacija yra. Galima apžiūrėti vietoje. Nlsdsu Damdepfx Aduei

Sąlyga: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 108111, darbinis plotis: 240 mm, obliavimo aukštis: 160 mm, darbinio aukščio: 180 mm, Four-sided planer after maintenance, machine weight 3,900 kg. Nlsdpfxovrq U Dj Aduoi