Naudota visiškai sukomplektuota užpildymo linija gazuotiems gaiviesiems gėrimams (CSD) PET ir stiklo

Atlanta

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: FA55, Machine Overview The ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed for collecting containers and packaging them into a corrugated cardboard tray with film overwrap. The machine is configured for wrap + film on tray operation and works with a straight (inline) product infeed. It is suitable for a wide range of container sizes from 0.5 L to 10 L, typically covering PET, glass, or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a complete overhaul in 2022. It is described as ready for operation. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray-wrap with neutral film overwrapping Format range: 0.5 L – 10 L Machine configuration: Supplied without container infeed system (to be provided by the line) Year of manufacture: 2008; Refurbished: 2022 Typical process flow: Inline grouping of products; picking and forming/wrapping of tray blanks around grouped units; application and sealing of neutral film; discharge to downstream handling. The configuration offers robust stabilization on the tray with protective film wrapping, suitable for distribution and palletizing. Technical Specifications Model: COMBIGIOTTO 90-M Brand: ATLANTA Operating condition: Ready for operation Packaging configuration: Film + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine feed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (overhauled 2022) Automation & Control Industrial PLC-based control with HMI for recipe management and setpoint control (format parameters saved for repeatability). Speed control via frequency inverter/servo drives for synchronized infeed, grouping, tray wrapping, and film application. Integrated diagnostics, alarm history, and counters (shift/batch totals). Typical sensors: Product presence, jam detection, film end, tray blank level, safety interlock status. Electrical protection rating: IP54 for control panel and motors. Line Integration Container infeed: not included with this machine. The packer requires stable, synchronized upstream supply (accumulation/gap/division to be provided by line integrator). The inline design simplifies alignment with fillers, labellers, and downstream conveyors. Standard interface signals (typical): Machine Ready, Run Permission, Emergency Stop Loop, Fault, Upstream/Downstream Handshake. A detailed I/O list can be matched during integration. Discharge prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project planning). Condition & Maintenance Kwsdsxdnbzspfx Agfew Overall condition: ready for operation. The overhaul was completed in 2022 to restore full functionality. Preventive maintenance recommended: regular inspection of film path and sealing elements, grouping guides, and mechanical and electrical systems.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour, bottle formats: 500ml/750ml/1000ml/1500ml, max. blow air pressure: 40 bar, dimensions (L/W/H): approx. 7000mm/4300mm/3100mm, weight: approx. 20,000 kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorter, and chute. Documentation available. An on-site inspection is possible. Kwsdet Eu Azjpfx Agfew

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: FA56, Machine overview Automatic tray and film packer ATLANTA COMBIGIOTTO 90-M, designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then passes it through a shrink tunnel to create stable, retail-ready bundles. Ideal for beverage lines processing PET, glass, or HDPE bottles. Reference no. FA56. Year of construction: 2008, overhauled in 2022. Condition: Operational. Expected output up to 25 bundles/min, depending on product and format. Operating principle: Automatic grouping of bottles, tray forming/loading, film wrapping, and consolidation in the shrink tunnel. Packaging configuration: Tray + neutral shrink film. 90° infeed enables compact layouts and easy integration into existing conveyor systems. Key technical data Brand / Model: ATLANTA COMBIGIOTTO 90-M Operating mode: Automatic Infeed/outfeed orientation: 90° side infeed Packaging: Tray + neutral film Tray storage / forming: Available Nominal capacity: up to 25 bundles/min (depending on product and format) Year: 2008 (overhauled in 2022) Condition: Operational PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-controlled operation with operator HMI for recipe selection, speed setpoints, and diagnostics. Inverter-driven drives for smooth acceleration and product handling. Optoelectronic sensors for product presence, faults, and film detection. Shrink tunnel temperature-controlled for consistent film performance. Lockable access doors with safety monitoring for protected zones. Line integration Infeed: Accepts bottles from conveyor with 90° transfer into the feed area; integrated selection/diverter functions for pack pattern formation prior to tray loading. Discharge: Outfeed conveyor after shrink tunnel for connection to inspection, carton handling, or palletizing. Kedpfxjx H Thzj Agfeww Typical signals and handshakes include start/stop, faults, emergency stop, and speed reference. Mechanical interface and layout diagrams available on request for line engineering. Condition & Maintenance Comprehensive overhaul completed in 2022. Machine will be delivered in operational condition. Preventive maintenance recommended: regular inspection of film path, knife/sealing components, tray loader/former, lubrication, and conveyor wear parts. Performance & Versatility Suitable for a wide range of cylindrical or square bottles commonly used in beverages. Typical bottle pack patterns (e.g., 2×2, 3×2, 4×3 etc.), depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray provides rigidity and stacking stability. Consistent bundle quality through controlled film wrapping and thermal shrink process. Site requirements Electrical supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and protective earth). Auxiliary systems: 24 V DC. Instrumentation voltages: 24 V AC – 230 V AC....

Būklė: naujas, Skersmuo / mm Pjovimo (kiekis) / 0 Svoris / kg Atlanta 58 83 907 servo sraigtinis reduktorius Ksdpeymquwofx Agfeww Tipas: 58 83 907 n1: 5000 aps./min. P: 5,20 kW

Būklė: geras (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, LINIJINIS PET PŪTIMO ĮRENGINIŲ KOMPLEKTAS su pagalbine įranga AC ARCOR - multiBlow2 - 2017 Greitis: 1,5L - 6000 Ertmės: 4 Formatai: 0,1 - 3,0L PAGALBINĖ ĮRANGA 1. Šaldytuvas - M.T.A S.p.A - TAE EVO 051 2. Žemo slėgio kompresorius - SHAMAL 45kW 3. Aukšto slėgio kompresorius - KAESER Booster N 753 - G 13 bar / 40 bar 4. Oro džiovyklė 5. Imtuvo bakas - žemas slėgis - MAX 16 Bar 6. Imtuvo bakas - aukštas slėgis - MAX 45 Bar Kedpfx Aequuvregfsww

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp: 500 mm long TECHNICAL DETAILS: LOW PROFILE turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · Ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Acoustic signal at the start of wrapping and at the end of the cycle Kedeykuiaepfx Agfsww Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Pushbutton for machine power-on as well as start & stop function & reset in accordance with CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL All functional parameters adjustable via display F00 - Display lock for program changes F02 - Infinitely variable turntable speed 5-12 rpm Carriage speed up and down can be set independently F03 - Carriage speed up from 1.3 to 5.4 m/min F04 - Carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps at the pallet base (1 - 10 wraps) F06 - Number of wraps at the pallet top (1 - 10 wraps) F09 - Photo sensor delay for wrap height F13 - F16 - Film tension for base & top wrapping / ascent & descent, independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAP PROGRAMS AT THE CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrap (upwards/downwards) F01 - 2 - Simple wrap (upwards only or downwards only) F01 - 3 - Pushbutton for manual functions F10 - F11 - Wrapping cycle with pre-set start and stop height F12 - Wrapping to a stored height (disabling light sensor for height) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for applying edge protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via pushbutton FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specifications: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V - 1PH+N+PE - 50/60 Hz Total power: 1.2 kW / 8A Optional: Gears for OPRS pre-stretch ratio of 150% / 250% / 300% available Further machines available from stock in Ludwigsburg.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control Kwedpfx Aeykuh Nsgfew

Būklė: naudotas, Gamybos metai: 2017, Overview Ksdpfouzpiijx Agfjww The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o. It has a production capacity of 5 hl. Technical Details Two-vessel brewhouse with electric heating Nominal volume: 500 l Total volume: 550 l The brewhouse is mounted on a separate frame with stairway and platform made of stainless steel Includes Alfa-Laval cooler: Cooling of 500 l from 99°C to 12°C within 1 hour Shut-off valves on the chimneys Agitators in both vessels with frequency converter for variable speed control Lauter tun with level sensor for automatic water refilling Brewhouse control via touchscreen display accessible from the work platform The software required to control the brewhouse can be installed on a portable device (e.g. tablet), allowing remote operation of the brewhouse. There is also the option to offer open fermenters with a nominal volume of 1,000 l (total volume 1,200 l) for sale.

Gamybos metai: 2025, veikimo valandos: 1 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SFERA21Kommission1, Stretch Wrapper ATLANTA SFERA Easy 6 individually programmable wrapping cycles Wrapping height: 2200 mm Mast height: 2050 mm (fits through almost any doorway) FE electromagnetic film brake Film tensioning electronically controlled via control unit Film specifications: Max. outer diameter Ø300 mm – Height = 500 mm – Core Ø76 mm GMK (Compass): Start and end of wrapping always identical Film tension can be stored in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series 160 pallets per charge – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height (machine with mast, pallet included): 2,150 mm Height detection by photoelectric sensor or manual height input via display Protective bar for emergency stop of drive unit Emergency stop switch according to CE regulations Acoustic warning signal and warning light on machine start-up Fall protection for film carriage Push button for start & stop Machine operation according to CE standard Ø 22 mm ADJUSTABLE PARAMETERS AT CONTROL PANEL: All function parameters adjustable via display F00 – Display lock for program change F02 – Adjustable machine speed around the pallet up to 80 m/min Carriage speed up and down can be set independently F03 – Upward carriage speed from 1.3 to 5.4 m/min F04 – Downward carriage speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Setting pallet wrapping height F13–F16 – Film tension setting for foot & top wrapping / up & down independently adjustable F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01-1 – Cross wrapping (upwards/downwards) F01-2 – Single wrapping (only upwards or only downwards) F10, F11 – Wrapping cycle with predetermined start and stop height F12 – Wrapping to a stored height (deactivates photoelectric height sensor) F21 – Wrapping cycle for pallets with large dimensions Kodpfx Ajykuhpogfjww F22/F23 – Cycle for applying top sheet film F29 – Soft start cycle for applying edge protection F30, F31 – Cycle with reinforcement and adjustable wrap count Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Optional photocell for dark packaged goods *Leasing: 48 months term // 0 down payment The machine was in use for 3 months as a replacement unit at a customer site. Has some scratches – also on the housing – see pictures. Machine is in excellent condition. More pictures available upon request. The machine can be inspected in Ludwigsburg by appointment. Immediately available. Price ex works Ludwigsburg.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S22EVA_07, Demonstration machine - like new. EVA Base frame raised by 150mm - 200mm, for loading with electric pallet truck or forklift - height adjustable Turntable diameter: 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed, adjustable up/down Acoustic signal at wrapping start and stop at end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops at the same home position Anti-drop protection for film carriage Push buttons for machine power-on as well as start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All functional parameters adjustable via display F02 - Continuously adjustable turntable speed 5-12 rpm Carriage speed for up and down travel adjustable independently F03 - Upward carriage speed from 1.3 to 5.4 m/min F04 - Downward carriage speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Setting for pallet wrapping height F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - Cross-wrapping (upward/downward) F01 - 2 - Simple wrapping (up or down only) F01 - 3 - Manual wrapping F12 - Wrapping to a predefined height (disables photoelectric sensor) F29 - Soft-start cycle for application of edge protectors Soft-start function reduces film breakage on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage Film specification: Max. external diameter Ø 250 mm - Core Ø 76mm - Height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A Kedpfeykuhcsx Agfoww Additional units available from stock for immediate delivery.

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, NP 687 | LINEA COMPLETA DI IMBOTTIGLIAMENTO PET SIDEL PER BEVANDE GASSATE Prodotto: acqua e bevande gassate Velocità: 13.500 BPH Pressa preforme PET Sameto Modello: EBH 2050 Anno: 2010 Soffiatrice PET Sidel Modello: SBO10 Anno: 2010 Diametro collo: fi28 1881 Numero stampi: 10 Trasportatore aria Alsim Anno: 1999 Monoblocco Alsim Modello: Asmojet 1T RV-P 48/60/10K Anno: 1999 Rinser: 48 pinze 1 trattamento con acqua Riempitrice: 60 valvole Tipologia di riempimento: isobarico Tappatore: 10 teste Miscelatore Alsim Anno: 1999 Produzione oraria: 30 pph Asciugabottiglie ACI Anno di costruzione: 2015 Etichettatrice Krones Contiroll Modello: Contiroll Anno di costruzione: 2004 Tipologia etichettatrice: rotativa Numero piatti: 15 Etichettatura PET: wrap-around Tipologia stazione etichettatura: roll-fed Fardellatrice Acmi Modello: SHRINK-WRAPPER Fenix Anno: 2019 Versione: avvio film Tipologia: solo film Applicatore maniglie Smipack Modello: HA 35-50-70 Anno: 2002 Pallettizzatore Alsim Modello: Valiant 1I 1P Anno: 1996 Completamente automatico Tipologia: sistema a spinta Avvolgipallet PM Pragometal Modello: OBS rotomatic standard Ksdpfxoxz Aytj Agfoww Anno: 2009

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23NEOS04, Demo unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. Ksdpfx Ajykug Sjgfoww 99 individually storable programs Supplied with 1 remote control – additional units available as an option Wrapping height: 2150 mm Mast height: 2050 mm (fits through nearly any door) Film power stretch: 120–400% Motorized pre-stretch system with stepless adjustment Pre-stretch ratio adjustable from 120 to 400% via control panel Film tension electronically controlled via control unit Quick insertion system IEF for easy film roll change Film specifications: Max. outer diameter Ø300 mm – Height = 500 mm – Core Ø76 mm Automatic film cutting unit Film tension can be stored in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – Charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (Pallet Included): 2,150 mm Height detection via photoelectric sensor or by input on display Protective bar for emergency stop of drive unit Emergency stop switch as per CE regulations Acoustic warning signal and warning light on machine start-up Fall protection for the film carriage Push button for Start & Stop Machine safety complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL: All functional parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min - Carriage speed up and down independently adjustable - Carriage speed upwards: 1.3 to 5.4 m/min - Carriage speed downwards: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10) - Number of wraps at pallet top (1–10) - Setting for pallet wrapping height - Film application tension for base/top wrap and ascent/descent independently adjustable - Film pre-stretch for base/top wrap and ascent/descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrap (upward/downward) - Simple wrap (upward or downward only) - Wrapping cycle with predefined start and stop height - Wrapping to a preset height (with light sensor deactivated) - Wrapping cycle for pallets with large dimensions - Wrapping cycle for top sheet - Soft start cycle for application of edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears at sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Additional units available immediately from stock Ludwigsburg

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25MARATHON01, Semi-automatic manual film wrapper MARATHON TECHNICAL DETAILS The world’s only "PATENTED" mobile stretch wrapper that operates without electric drive, capable of wrapping pallets with LLDPE stretch film The machine wraps loads of any shape, weight, and size Recommended for use with pre-stretched film rolls, maximum roll diameter Ø 230 mm Minimum load dimensions: 650 x 400 mm Minimum load weight: 50 kg Wrapping height (including pallet): 2000 mm Easy operation without reliance on a motor Manual movement by the operator The film carriage is manually raised and lowered The machine features simplified operation Replaces manual wrapping by hand MANUAL WRAPPING OPTIONS The operator is the drive—upwards and downwards wraps are freely selectable Kjdpsykuf Isfx Agfoww FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE with manually adjustable brake roller on the film carriage Film specifications: Max. outer diameter Ø 230 mm – core Ø 76 mm – height = 500 mm Optional: Stretch film with core Ø50 mm or coreless Additional equipment available from stock in Ludwigsburg.

Būklė: naudotas, Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Beer bottling line Speed: 2,000 BPH Line composed of: BORELLI monoblock Year: 2014 Conveyor direction: clockwise Rinser: 12 grippers Nozzle type: fixed Number of treatments: water and inert gas Filler: 16 valves Filling type: isobaric Pre-evacuation Degassing Single-head crown capper Cap size: 26 mm TEKNINOX pasteurization tunnel Year: 2014 Pasteurization temperatures: pre-pasteurization and pasteurization managed by PLC ENOS labelling machine Year: 2014 Label type: linear, 2 stations Application types: Label and back label from the same reel Neck label SIAT carton sealer Year: 2014 Tape application on both top and bottom PARMAMET cluster packer Year: 2007 Format: 3x33 Safety guards included Belts NOT INCLUDED Kodpev Hrcxsfx Agfsww Code: NP 578

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available Kodpfx Ageykud Rjfeww TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control