Mobilus padėklų vyniotuvas

ATLANTA - mobiler StretchWickler SFERA Easy PowerStretch 120-400%

Stretch Wrapper ATLANTA SFERA Easy
6 individually programmable wrapping modes
Wrapping height: 2150 mm
Mast height: 2050 mm (fits through almost any door)
Film power stretch: 120-400%
Motorized pre-stretch system with infinitely variable adjustment
Pre-stretch ratio adjustable via control panel from 120% to 400%
Film application tension electronically controlled via control unit
Quick-load IEF system for easy film roll change
Film specifications: max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm
Film tension can be saved in 4 steps
Geomagnetic compass GMK – always stops at the position it started
Manual roping function at the film carriage for reinforcement wrapping

TECHNICAL DETAILS:
Two maintenance-free AGM batteries, 12 V – 100 Ah, connected in series
160 pallets per charge – Charging time: 8–10 hours
High-frequency battery charger with LED display
Wrapping height (machine with mast, including pallet): 2,150 mm
Height detection via photo sensor or programmable via display
Safety bar for emergency stop of drive
Emergency-stop switch according to CE regulations
Acoustic warning signal and warning light on machine start
Fall protection for the film carriage
Push buttons for start & stop
Machine operation in accordance with CE standards Ø 22 mm

ADJUSTABLE PARAMETERS ON THE CONTROL PANEL:
All function parameters adjustable via display
F00 – Display lock for program changes
F02 – Adjustable machine speed around the pallet up to 80 m/min
Carriage speed upward/downward adjustable independently
F03 – Carriage speed upward 1.3 to 5.4 m/min
F04 – Carriage speed downward 1.3 to 5.4 m/min
F05 – Number of wraps at pallet base (1 - 10 wraps)
F06 – Number of wraps at pallet top (1 - 10 wraps)
F09 – Wrapping height setting
F13–F16 – Film application tension for bottom/top wrapping and upward/downward runs, individually adjustable
Knjdpfxjrqgivj Aa Tjd
F17–F20 – Film pre-stretch for bottom/top wrapping and upward/downward runs, individually adjustable
F62 – Ergonomic film changing height
Film consumption display (option for PRS – PS)

WRAPPING PROGRAMS ADJUSTABLE VIA CONTROL PANEL:
6 programmable wrapping cycles for SFERA EASY
F01-1 – Cross wrapping (up/down)
F01-2 – Simple wrapping (only up or only down)
F10–F11 – Wrapping cycle with specified start and stop height
F12 – Wrapping to a stored height (with photo sensor off)
F21 – Wrapping cycle for oversized pallets
F22/F23 – Wrapping cycle for top sheet film
F29 – Soft start cycle for edge protection application
F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps
Soft start to reduce film breaks on sharp pallet edges
Wrapping cycle with manual or motorized roping (optional)

Further units available ex stock Ludwigsburg.
Was a customer replacement unit.
Top condition.
Immediately available.
Inspection possible in Ludwigsburg by appointment.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.