Svyruojančios lenkimo staklės ARMO EDNOR TOL TE 104 2006

ARMO EDNOR TOL TE 104

Sąlyga: geras (naudotas), Gamybos metai: 1980, mašinos/transporto priemonės numeris: 27-3, Offer 23317 Technical Data: - Max. working width: 2040 mm - Max. sheet thickness at 40 kp/mm² tensile strength: 3.5 mm - Bending angle adjustment, electronically pre-selectable: 0 – 135° - Smallest bending radius: 1.25 x sheet thickness - Minimum inside flange height: 6 x sheet thickness - Automatic sequence control for a fully automated workflow - Operation via hand or foot switch - Maximum opening width/lift of the upper beam: 200 mm - Height adjustment: - of the bending beam: 80 mm - of the lower beam: 80 mm - Upper beam drive: 400 V / 1.1 kW - Bending beam drive: 400 V / 1.5 kW Lodpsrklfrjfx Abkshr - Manual back gauge, operable from the front - Space requirement: approx. W 3300 x H 1350 x D 1500 mm - Weight: approx. 2600 kg

Sąlyga: naujas, Gamybos metai: 2025, The Forstner POWER STRAIGHT PRO is the heavy-duty version of the STRAIGHT PRO. Even more robust straightening rolls ensure perfect levelling results even with thicker sheets. The straightening unit, equipped with six straightening rolls, is easy to adjust and guarantees flat blanks for further production, regardless of material type. Key advantages: - Very robust construction - 6 straightening rolls with automatic adjustment - Perfect levelling results - Easy-to-operate machine Standard equipment: Ljdpfx Abjurtg Sekohr Roller inlet funnel Feed table Cross-cutting guillotine Touch control panel Speed: 25 m/min Max. straightening and cutting capacity: 2.00 mm at 400 N/mm² or 1.5 mm at 600 N/mm² Optional working width of 1524 mm also available

Sąlyga: geras (naudotas), Gamybos metai: 1988, Press brake, folding machine, swing bending machine, die bending machine - Delivery: as-is, as-inspected - Operation: manual (no automatic mode) - Manufacturer: RAFAMET swing bending machine type KM-4 - Drive: mechanical - Max. working width: 2020 mm Lhjdpfev Tpxqox Abkor - Max. sheet thickness: 4 mm - Back gauge depth: 750 mm - Connected load: kW - Dimensions: 1540/3350/H1510 mm - Weight: 3900 kg

Sąlyga: naudotas, Gamybos metai: 1976, mašinos/transporto priemonės numeris: 761907, General / Technical Data: Heavy-duty mechanical folding machine, robust welded construction, in very good condition Working width: 2000 mm Material thickness for steel ST 50 max.: 20 mm Upper beam (clamping beam) opening: max. 475 mm Adjustability of the bending beam: 200 mm motorized height adjustment Bending angle: 130° adjustable via electronic rotary angle input Upper beam speed: 6 mm/sec Bending beam rotation speed: 1.25 rpm (approx. 90 sec for 90° bend) Backgauge: motorized adjustment from 50–999 mm, with digital length display Machine dimensions (H x W x D): 3600 x 4350 x 4400 mm (without pit / with bending beam platform) Control cabinet dimensions (H x W x D): 1800 x 1200 x 400 mm Drive power, bending drive: 30 kW Drive power, upper beam (clamping beam): 22 kW Power supply: 500 Volt 50 Hz / Control voltage 220 Volt Weight: 24,500 kg Accessories / Special Equipment: • 5 sets of bending tools, each consisting of clamping and bending bar R8, R12, R15, R20, R40 • Foldable backgauge Lhjdpfx Abjcvtbysksr • Central lubrication system • Machine documentation Remarks: • Machine comes from a maintenance facility • A pit with a depth of 900 mm (foundation) is required for the machine; the substructure for the swing drive visible in the pictures is only for test runs and demonstrations.

Sąlyga: naudotas, Gamybos metai: 2020, Sheet width: 2100 mm Sheet thickness: 3.0 mm Frame width: 2450 mm Opening width: 160 mm Max. bending angle: 150° Backgauge (adjustable): 6.0 – 1000 mm Control: CNC Total power requirement: 5.37 kW Dimensions (L x W x H): 3250 x 2450 x 2100 mm Machine weight: approx. 3850 kg ORIGINAL PRICE: ~ €60,000 Features: - ERBEND 15.6" CNC control panel - Electric backgauge, adjustable from 6.0 to 1,000 mm * Material support table with ball casters * Servo motor drive - LED machine lighting - 1x 30° upper tool – radius 1.0 mm - 1x bending rail 15 mm / 1x bending rail 25 mm - Electric safety device at the front (light barriers) Ledpfxst Smm Es Abkehr - Free-moving foot pedal - Operating manual - EC Declaration of Conformity Special accessories included: - Segmented gooseneck upper tool, height = 90 mm - CNC electrically adjustable lower beam - Manual crowning of the bending beam

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, mašinos/transporto priemonės numeris: DF0147, Pressure: 150 t Lodpjfxygwofx Abkehr Total power requirement: 20 kW Machine weight approx.: 11.5 t Space requirement approx.: 8800 x 1800 x 2200 mm Pressure adjustment via rotary control: infinitely variable from 15-150 t Cylinder diameter: 100 mm Pressing speed (infinitely adjustable via joystick): 0-9.9 mm/s Servomotor: 2 kW Cooling unit: 1 kW Oil tank (below press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two hydraulic cylinders. The straightening machine is set up for the respective material type using replaceable, rounded spacer elements. The 10 inserts can be changed manually by simply sliding them into the holding grooves. The delivery scope includes a basic set for one profile. After setup, the program for the respective profile is selected via the monitor. The monitor displays the ideal contour line and an ascending and descending millimeter scale with 0.5 mm grid lines. The profile to be straightened is placed on the left side of the table, pushed against a stop, and clamped using a quick-clamping device. Both the stop and the quick-clamping device are quickly adjustable and mounted on a clamping plate. This clamping plate travels left and right on a linear guide. Movement is powered by a chain drive and a servomotor. Operation is controlled via joystick at the operator panel. After the profile is clamped, the operator moves the clamping plate into the press using the joystick. The travel speed can reach up to 100 mm per second but can be infinitely reduced to 10 mm per second; this is easily accomplished by reducing joystick pressure. A high-resolution camera displays the profile inside the press. The operator can observe exactly how the profile deviates from the ideal line. Depending on requirements, the operator pushes or pulls the profile into the desired alignment. Then, the operator continues slowly through the press, checking on the monitor whether the profile is now completely straight. If necessary, the operator can go forwards or backwards to make further adjustments. Once straightening is complete, the profile exits the press on the right and can be removed. The clamping plate can then be returned to the left loading position, or loaded from the right for time optimization. Operation of the press is only permissible under the following conditions: Permissible ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Installation altitude above sea level: +1000 m Permissible electrical grid fluctuations: +/- 10%

Sąlyga: naujas, Gamybos metai: 2025, With nuEvolution, your customers or your sales team can order custom-designed or catalogue-standardized mounting frames, panels, and accessories directly on-site and submit them to you for production. Thanks to our cloud-based solution, your data is instantly available in the office for your production process and automatically generates PDF files with the required labels for you. From this point on, the profile can also be sent directly to your machines (including algorithmically generated cutting optimization). With nuEvolution, you can transform your company into an efficient and modern smart factory in no time. Lhodpfx Aspl Uxysbkor

Sąlyga: geras (naudotas), Gamybos metai: 1984, mašinos/transporto priemonės numeris: 6229, Offer 24483 Technical specifications: Lhedpeu Eq Rpofx Abkor - Max. working width: 1020 mm - Max. material thickness at 40 kg/mm² tensile strength: 4 mm - Bending angle setting, preselectable: 6° - 135° - 6-step bending angle preselection - Maximum opening width / stroke of the upper beam: 250 mm - Height adjustment: - Of the bending beam: 50 mm - Of the bottom beam: 50 mm - Electric foot switch - Upper beam drive: 400 V / 2.2 kW - Bending beam drive: 400 V / 2.2 kW - Space requirements approx.: W 2100 x H 1400 x D 1100 mm - Weight approx.: 2000 kg

Sąlyga: geras (naudotas), Disc grinding machine, disc sander, disc grinding device, disc grinder, edge grinding machine, edge sander -Drive: 2.2 kW 3000 rpm Lsdjcmh H Topfx Abkehr -Disc diameter: 420 mm -Table size: 50 x 420 mm -Dimensions: 1000/600/H1150 mm -Weight: 210 kg

Sąlyga: naudotas, Technical data: Speed: 3000 rpm Connection: 400 V Motor power: 0.37 kW Ljdpfx Aopz Ibwobkohr Dimensions (approx.): 680 x 380 x 380 mm