Automatinė štampavimo mašina - dviguba kolona

Arisa S-2-630-350-FS

Būklė: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 001669, Lg 33121 Single-sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Max. strip width: 600 mm Max. load capacity: 3,000 kg Max. coil outer diameter: 1,800 mm Expansion: hydraulic Pressure arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading station + decoiler traversing device Includes: Lg 33221 High-Performance Precision Leveler LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Max. pass-through width: 620 mm Number of leveling rollers: 9 Dodpfehigmbsx Ac Deur Leveling roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Leveling rollers are multi-supported to prevent deflection All rollers driven by distribution gearbox and cardan shafts. Used, as-is ex-stock, immediately available. Refurbishment available upon request. Delivery time as agreed. Further data coming soon or available on request.

Būklė: geras (naudotas), Gamybos metai: 1995, mašinos/transporto priemonės numeris: 0540/98, Funkcionalumas: visiškai funkcionalus, Seriennummer: 0540/98. Baujahr: 1998. Presskraft: 400 Tonnen. Hublänge: 300 mm. Dusdpfeicbbzjx Ac Der Hubzahl: 10–40 Hübe/min. Stößelverstellung: 300 mm. Einbauhöhe: 700 mm. Tischabmessungen: 1600 x 1300 mm. Eigengewicht: 45 Tonnen. Ständeröffnung: 1600 mm. Außenmaße: 2 x 3 x 6 Meter. Steuerungssystem: MEAB. Bandzuführung / Richtmaschine: iRON RNE 50B / 11. Abwickelhaspel: iRON SA6000, max. 700 mm.

Būklė: naudotas, Eccentric Punching Press HAULICK + ROOS Type RVD 125 Double Column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column gap: 900 mm Side column spacing: 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Shut height as shown: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double connecting rod drive with 4-point eccentric shaft bearing for off-center ram force absorption - Free-standing electrical cabinet Dusdpfx Acehlnzkj Der - NC roller feeder EBU, width 250 mm, year 2003 - Separate control panel for roller feed unit - Coil direction from left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Būklė: naudotas, Gamybos metai: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clearance between frame uprights: 590 mm Shut height: 690 mm Table size: 1500 x 880 mm Pass-through opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Duedpfovuun Tjx Ac Dor Weight: 32.0 t Space requirement approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading operations and automatic operation in accordance with CE standards Equipped with infinitely variable drive, safety light curtain (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic drawing cushion in the table (20 t), motorized central lubrication, operator panel with two-hand control Clear space between tie rods: 940 mm Side opening: 900 mm

Būklė: naudotas, Gamybos metai: 2001, Pressure 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system Total power requirement: 29 kW Machine weight approx. 9.5 t Required floor space approx. ... m Quotation We are pleased to offer you—subject to prior sale and errors in technical data—from our stock: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model ROLLEX, Year 2001 Steplessly adjustable rolling force from 0.2 to 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive: approx. 8.5 kW each Total connected load: approx. 29 kW – 400 V – 50 Hz Dedpfx Acet Hw N Tj Dsur Weight: approx. 9,500 kg Accessories / Special Features - The machine is equipped with a modern CNC control system developed by the manufacturer. Allows input of all relevant process and workpiece data, enabling fast and straightforward set-up for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. - Built-in (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device, prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the workpiece front. The stroke of the workpiece slide is approx. 500 mm—so the workpiece is clamped and moves hydraulically between the two rolling tools. - Cooling unit for hydraulic oil, separate electrical cabinet, CNC operating panel, etc. - Transparent safety covers in the working area. Central lubrication.

Gamybos metai: 1980, būklė: naudotas, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table surface: 875 x 695 mm Ram surface: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30 – 90 Gap width: 450 mm Machine weight approx. 6.2 t Space requirement approx. 2.0 x 2.1 x 3.2 m Installation height (stroke down, ram adjustment up): 480 mm Further information: Dodpfxsdlcy Hs Ac Dsur - The machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen, including wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine is safe for manual loading operation at open tools. Before delivery, a current UVV safety inspection and brake time measurement will be carried out.

Būklė: naudotas, Gamybos metai: 2021, veikimo valandos: 3 500 h, spaudimo jėga: 120 kN, darbinio tūrio: 36 cm³, įpurškimo slėgis: 2 200 juosta, bendras svoris: 5 400 kg, sraigtinio konvejerio skersmuo: 22 mm, Pristatymo sąlygos: iš vietos Dedjxwy Utopfx Ac Djur Pristatymo laikas: pagal susitarimą Apmokėjimo sąlygos: 100% apmokėjimas prieš perimant įrenginį, grynoji suma

Būklė: geras (naudotas), Gamybos metai: 1999, For sale is a horizontal machining center from Axa, type Vario, with 2 milling tables. The machine is in good condition and has performed little 'heavy machining' (mainly used for drilling and thread cutting). Technical data: Year of manufacture: 1999 Control system: Heidenhain TNC 410 M digital Table dimensions: 2030 mm x 500 mm Maximum table load (evenly distributed): 800 kg Min. spindle speed: 30 rpm Max. spindle speed: 10,000 rpm Drilling length on X-axis (mechanical feed): 1760 mm Drilling length on Y-axis (mechanical feed): 500 mm Drilling length on Z-axis (mechanical feed): 620 mm Machine dimensions: Height: 3,900 mm Length: 2,900 mm Width: 3,000 mm Weight: 9 t SCOPE OF DELIVERY / EQUIPMENT - 1 spindle version SK 40 DIN 69871 A - 1 electrical cabinet (integrated in the rear of the machine) - Ball screws: Manufacturer Deutsche Star Dusdpfx Ajtt Abmoc Djr - Central lubrication unit: Manufacturer Bielomatik - Hydraulic unit: Manufacturer Hydac - RTA 2-300 - MK-3 manually operated tailstock - Electronic handwheel HR 410 - Scraper belt conveyor, ejection side right - Measuring probe TS 630 WORKPIECE HOLDERS NOT INCLUDED IN THE OFFER Prices plus VAT. Viewing by appointment possible. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 170 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 2.2 [kW] - Minimum C-axis resolution: 1 [degree] - Number of tool holders: 1 TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 5,000 [rpm] FRONT TOOLING - Number of positions: 4 Duedpfx Acswizt De Djr BACK WORK - Number of positions: 7 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 11 [kW] WEIGHT AND DIMENSIONS - Footprint: 1640 x 1200 [mm] - Machine height: 1725 [mm] - Machine weight: 1950 [kg] - Operating hours: 11,500 [hrs.] EQUIPMENT - Control: Fanuc Oi TD - Powered guide bush - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank - Bar feeder: Tornos SBF 320 - Electrical transformer

Būklė: naudotas, Gamybos metai: 2007, Pressure: 200 t Throat depth: 510 mm Stroke: 16 - 160 mm Ram adjustment: 120 mm Table surface: 1500 x 1000 mm Table height above floor: 900 mm Pass-through opening in table: 800 x 250 mm Ram surface: 1000 x 700 mm Pin hole in ram: 65 x 110 mm T-slot width: 28 mm Adjustable stroke rate: 30 - 120 strokes/min Hydraulic unit oil capacity: 5 l Installation height (max. stroke, ram adj. top): 600 mm Installation height (stroke bottom, ram adj. top): 440 mm Total power requirement: 32.2 kW Machine weight approx.: 24 t Required space (WxDxH): 2.85 x 3.1 x 3.65 m - Hydraulic clutch - Fixed table - Hydraulic overload protection in the ram - Hydraulic connecting rod clamping - Motorized ram height adjustment, 120 mm, with digital display of set ram height, rapid and creep speed - Fully automatic stroke adjustment, adjustable range 16 - 160 mm - Ram weight compensation - Electronic top dead center correction - Planetary gearbox - Central oil circulation lubrication - Separate control desk with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return stroke) - Additional operating mode "setup/creep speed" - Electric stroke counter - Electric preset counter - Electric travel limitation of the connecting rod pin - Electronic cam controller - Infinitely adjustable drive (frequency-controlled) - 2 power sockets - Clamping plate - Temperature monitoring of main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler Djdpsvbk Rwjfx Ac Djur - Set of vibration-damping elements Additional equipment: Electronic roller feeder ebu EVX 500 Feed width: 10 - 500 mm Material cross-section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Intermittent ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min