Įpurškimo liejimo mašina

Arburg 270 S 250-100

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 36 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Max. travel: 420 mm Minimum automatic travel: 1 mm Traverse speed: 100–3500 mm/min Reversal delay: 0–5 sec. Maximum table swivel 400/650 mm: 30°/15° TRANSVERSE SLIDE: Max. travel: 170 mm Iasdow T Sc Njpfx Af Iol Rapid traverse: 30 mm Plunge depth in diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm GRINDING SPINDLE HEADSTOCK: Wheel: dia. x width x bore: 350x32x127 mm Drive power: 3 kW Peripheral speed vs: 30 m/s Spindle speed: 1600/1975/2200 rpm Manual traverse: 120 mm Swivel to the right: 15°/30° Optional guard for wheel pack, max. width: 50 mm WORKPIECE HEADSTOCK: Swivel range: 0°–90° Speeds nw: 80/175/380/800 rpm Internal taper: Morse 4 Clamping collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Load during external grinding: 12 Nm Continuous drive option, speed range I: 30–300 rpm Continuous drive option, speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill stroke: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centers: 400 mm Measured over 400 mm: 0.002 mm Between centers: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for external grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage fluctuations: –15% to +10% Permissible frequency fluctuations: +/- 3% Compressed air: 5 bar Unless otherwise stated, the technical data is provided without obligation and subject to errors or omissions.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, 1.0 pc used injection molding machine Manufacturer: ENGEL Model: VICTORY 200/28 TECH Year: 2007 Ijdpfxeu Eu Tns Af Ieal Clamping force: 28 tons Tie bar distance: TIE-BAR-LESS Screw diameter: 25 mm Max. shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Equipment: - 1 x core pull

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Full stainless steel construction for 2 Euro pallets with a loading height of 1500 mm max. 80 crates sized 400 x 300 x 300 mm (L x W x H) External dimensions: Width x Height x Depth: 2450 mm x 2678 mm x 2050 mm Chamber internal dimensions: 2066 x 1795 x 1340 mm (Width x Height x Depth) Insulation thickness: 40 mm Standard features: • Electronic pasteurization control, including: – Adjustable heating rate (also depending on the boiler steam output) – Setting of the desired pasteurization temperature – Setting of the desired holding time – Setting of the shut-off temperature • Electronic temperature recorder for product and chamber temperature • Air circulation by 1 high-performance radial fan with stainless steel impeller • Steam injection into the air duct for optimal steam distribution • Pneumatic steam valve • Switchable flap for fresh air supply for cooling • Central condensate drain with DN 100 connection socket for drainage piping • 4 height-adjustable feet on rubber pads Steam consumption: approx. 80 kg per hour at 1 bar Power consumption: 5.5 kW Iaedpfxsclq Ixs Af Ijl Weight: approx. 650 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Mikron / GF HPM 450 U WPC with Pallet Changer About the machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, comprehensively equipped! Very low spindle hours! Technical Data: -Heidenhain ITNC 530 HSCI -X-axis: 600 mm -Y-axis: 450 mm -Z-axis: 450 mm -B-axis: +45 / -120 ° -C-axis: 360 ° -Spindle speed range: 20,000 rpm -Spindle drive: 23 / 30 kW -Torque: 91 Nm Ijdpjx Hx Rhefx Af Ijal -Tool holder: HSK 63 -Pallet size: 280 x 280 mm -Max. pallet load: 150 kg -Number of tool magazine positions: 60 -Max. tool diameter: 90 (130) mm -Max. tool length: 200 mm -Max. tool weight: 6 kg -Tool change time: 3 sec. -Feed force X-Y-Z: 5 kN -Rapid traverse X-Y-Z: 22 m/min -Acceleration X-Y-Z: 5 m/s² -Rapid traverse B-axis: 50 rpm -Rapid traverse C-axis: 140 rpm Equipment: -7 pallets, including 6 pallets with clamping devices (see photos) -Electronic handwheel -Infrared measuring probe -Laser tool measuring system -Direct path measuring systems -APS Advanced Process System -ITC Intelligent Thermal Control -rConnect Live Remote Control (1 year) -KinematicsOpt -CT 60 tool magazine -DYNAFIX 7-position pallet changer -SIGMATEC 15 / 900 cbm/h oil mist extraction unit -Tool air blow-off device -Blow air at the spindle slide -Blow air through the spindle center -Internal coolant system 18 – 70 bar -Paper band filter system -Chip conveyor -Spindle oil chiller Installation dimensions (L x W x H): 6,600 x 4,000 x 2,800 mm Weight: approx. 8,600 kg An on-site inspection/test under power is, of course, possible. We are not your average machinery dealer -> Here you get advice from CNC experts! We are happy to offer you transport, installation/moving in, commissioning, as well as operator training with our own technicians. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: -Service -Maintenance -Overhaul -Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe from year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings as well as the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible threads: Metric, Imperial, Module, Diametral-Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, removable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand Isdpfx Afethd Shj Isal - Upon request, we can carry out a complete or partial overhaul of the selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further accessories, such as safety equipment - We are happy to take care of shipping and/or installation

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 83 000 h, spaudimo jėga: 350 kN, varžto skersmuo: 25 mm, For sale is an injection moulding machine by Arburg, model 320S 350-60. Year of manufacture: 2000 Automatic operating hours: 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request, at an additional cost. Price incl. VAT Machinery Purchase / Sale Iedpfxshhuq Ae Af Isal PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg Isdpfxovambco Af Ijal - Spindle brake engageable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself.

Sąlyga: geras (naudotas), Gamybos metai: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical specifications – Main data: - Table surface: 605 x 300 mm - Max. longitudinal table travel (manual): 750 mm - Cross table travel: 340 mm - Grinding height between table and new grinding wheel min/max: 22.5 / 322.5 mm - Standard magnetic chuck size: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X-axis / Longitudinal travel: - T-slots (quantity x width): 3 x 17 mm - Table feed, hydraulic: 0.3–25 m/min - Travel per handwheel revolution: 47 mm Y-axis / Vertical movement: - Automatic vertical feed – coarse, 12 steps: 0.001–0.03 mm - Automatic vertical feed – fine, 8 steps: 0.001–0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Scale division on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes (Ausfeuerhübe): 0–5 - Rapid traverse: 400 mm/min Iajdpfow Dvkajx Af Iol Z-axis / Cross travel: - Automatic intermittent cross feed: 0.5–20 mm - Automatic continuous cross feed / rapid traverse: 0.1–1.0 m/min - Travel per handwheel revolution: 5.0 mm - Scale division on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 rpm Accessories: various grinding wheels Documentation included

Sąlyga: naudotas, Cutter Hersteller: Seydelmann Modell: K 204 Ultra Ausführung: Edelstahl Volumen: 200 Liter Iaodpfx Ajtu I T Eef Isl 2 Messergeschwindigkeiten 2 Kesseldrehzahlen 2 Mischgeschwindigkeiten Abmessungen: 280 x 205 x 255 cm Elektrische Leistung: 78 kW Spannung: 400 V, 3 Phasen, 50 Hz

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Demag Ergotech - System 250/280-80 Iedpfx Ajhrw Amef Ioal Clamping force: 25 tons Screw diameter: 25 mm Year of manufacture: 2003 Sprue picker 2 units