Gręžimo įrankius

ARBOGA A2508 M

Sąlyga: naujas, Electric voltage: 400 V Hsdpfx Asd R Uz Tsf Iofb Frequency: 50 Hz Number of phases: 3 / 3 Ph Weight: 486 kg Blade dimensions: 2700 x 27 x 0.9 mm

Sąlyga: geras (naudotas), Gamybos metai: 2001, šlifavimo ilgis: 650 mm, šlifavimo plotis: 525 mm, bendras aukštis: 350 mm, stalo ilgis: 600 mm, stalo plotis: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Hfsdpfx Asvdal Aof Isb Specifications Metric / US Standard X-axis travel: 650 mm Y-axis travel: 525 mm Z-axis travel: 350 mm Table length: 600 mm Table width: 350 mm Table load capacity: 400 kg X-axis feed rate: 35,000 mm/min Z-axis feed rate: 1,000 mm/min Grinding wheel dimensions: 300 x 50 x 76.2 mm Power: 3.7 kW Speed: 2,800 rpm Dimensions (approximate) Length: 3,200 mm Width: 2,000 mm Height: 2,870 mm Weight: 2,300 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, this does not constitute representation or contractual terms. We recommend verifying all critical details.

Sąlyga: naujas, Saw blade diameter: 315/350 mm Cutting range at 90 degrees, round: 125 mm Cutting range at 90 degrees, square: 110 mm Cutting range at 90 degrees, flat: 160x90 mm Cutting range at 45 degrees, round: 105 mm Cutting range at 45 degrees, square: 90 mm Cutting range at 60 degrees, flat: 80x100 mm Total connected load: 1.8/2.5 kW Machine weight: approx. 0.2 t Space requirement: approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For mitre cuts to the right and left up to 45°, end stop at 90° and 45° left Hfodpfsd Iin Tex Af Iob • Suitable for cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Taper safety clutch made of hardened steel to protect the saw blades • Large, solid cast baseplate for maximum stability and low-vibration cutting • 2 speeds: 30 + 60 rpm • High-performance special gearbox with flexible coupling for heavy-duty applications • Automatic cooling directly onto the saw blade • Saw head with double bearing • 24 V safety switch in the handle with restart protection • Length stop, assembly tools NOTICE: Price is without saw blade!!!

Sąlyga: naudotas, Gamybos metai: 1998, Grinding length: 800 mm Hfodpfx Afjt Hxamj Isb Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx. 4.5 t G E I B E L & H O T Z CNC Cycle-Controlled Precision Surface Grinding Machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal movement 900 mm): 800 mm Max. grinding width (cross movement 500 mm): 500 mm Max. grinding height under wheel approx.: 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical movement: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total power approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Features: • Easy-to-program GEIBEL&HOTZ grinding cycle control • Type SL with standard grinding programs such as flat and multi-flat grinding with roughing – finishing – sparkout – return, plunge grinding, dressing cycle with compensation, stop at loading station; all inputs/parameters via operator touchscreen and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronic components including SIEMENS OP 25 • Table movement is via rolling ring thread drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical movements by precision ball screw drive • Diamond dresser on the left side of the table beside the magnetic plate with automatic dressing cycle, compensation, pull-back and edge rounding on grinding wheels possible • MPM balancing system for the grinding wheel • Built-in permanent electromagnetic chuck approx. 800 x 500 mm, fine-pole • Wet grinding equipment with separately standing belt filter coolant filter • Full enclosure with electrically monitored sliding doors • Freestanding control cabinet, work light, various accessories, operating manuals Condition: Good to very good condition! Suitable for large-area stock removal due to wide grinding wheel! A video of the machine will be available here soon. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: Net - upon receipt of invoice

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), 1 used low-pressure steam boiler ----- Manufacturer: LOOS, Gunzenhausen Model: U-ND Capacity: 800 kg/h Permissible operating overpressure: 1 bar Increased test pressure: 2 bar Total volume: 1,108 l Year of manufacture: 2004 CE mark: 0036 Equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200–900 kW, 120°C, gas control section, control cabinet with touch panel, and the existing coarse and fine fittings. Boiler body dimensions approx.: Diameter incl. insulation: 1,230 mm Width: 1,450 mm Transport height: 2,200 mm Hfedpfx Aonp Hwkjf Iob Length: 1,940 mm Total length incl. burner: 2,700 mm 1 used feed water module ----- Manufacturer: LOOS, Gunzenhausen Model: WSM Capacity approx.: 800 l With control cabinet, sample water cooler, 2 dosing containers

Sąlyga: geras (naudotas), Drilling capacity in steel (diameter): 25.0/30.0 mm Throat depth: 260 mm Quill travel: 120 mm Spindle speed range: 80–1400 rpm Table clamping area: 410 x 390 mm Total power requirement: 0.8/1.5 kW Machine weight: approx. 250 kg Space requirement: approx. 0.75 x 0.6 x 1.15 m Hfjdpfeuhhzhjx Af Iob

Sąlyga: naujas, ROGI SAWING MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw blade dimensions ----- 3770 x 34 x 1.1 mm Saw speeds ----- variable 20-80 M/min Motor power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Sawing capacity 90° ----- 355 mm / 490 x 300 mm Sawing capacity 60° ----- 230 mm / 180 x 220 mm Sawing capacity 45° ----- 350 mm / 290 x 340 mm Sawing capacity -45° ----- 290 mm / 250 x 250 mm INCLUDES: Saw blade Workpiece stop Base cabinet Hfsdpfx Afsga Tzxe Ieb Manometer for saw blade tension Saw blade guide with carbide inserts Hydraulic quick-release vice Coolant pump Hydraulic drop cylinder Motor protection switch Automatic end-stop

Sąlyga: naujas, Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Drilling stroke: 160 mm Spindle taper: MT 4 Table size: 500 x 420 mm Column diameter: 120 mm Speed range: 85 - 1800 rpm Feed rates: 0.1 - 0.2 - 0.3 mm/rev Total power requirement: 0.85 / 1.5 kW Machine weight approx. 500 kg Dimensions (L x W x H): 965 x 515 x 1920 mm High-quality column drilling machine for industrial applications. Suitable for multi-shift operation. - Tapping unit up to max. M20 - Precisely adjustable drilling depth stop - Height-adjustable work table via rack and hand crank Hfedpfxefv H H Hj Af Ijb - Base plate with T-slots - High concentricity accuracy less than 0.02 mm - Robust, high-performance drive motor - Digital speed display - Automatic feed

Sąlyga: naujas, The KNWP 50 M is a precision workshop press from the workshop press category and belongs to the group of manual workshop presses. These high-quality hydraulic presses, manufactured in Europe, are ideal for general assembly and straightening work as well as for testing workpieces. They offer safety and professional handling, making them the perfect choice for mechanical workshops, garages, and metalworking shops. The KNWP 50 M is designed for repair and assembly tasks such as pressing in and out bearings and straightening shafts. The machine features a maximum pressing force of 50 t and a total ram stroke of 160 mm. Thanks to the well-conceived design, it allows both hand and foot operation, as well as an adjustable worktable lift system and a multifunctional die for straightening flat material. Invest in this robust and powerful workshop press from KNUTH and equip your shop with professional equipment. Order now! Hfodpfx Afsuyh Twj Ijb

Sąlyga: geras (naudotas), Gamybos metai: 1986, Offer 23389 Technical Data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MT 3 - 4 feed rates: 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drilling spindle speeds (gear stages): 95 - 2,000 rpm - Drilling spindle stroke: 160 mm - Throat depth: 350 mm - Table with 3 T-slots, height-adjustable: 340 x 320 mm Hjdpfx Asrckv Hef Ijfb - Table tiltable left and right - Max. distance table to drill spindle: 500 mm - Max. distance machined base plate to drill spindle: 1,050 mm - Column diameter: 160 mm - Coolant system - Work light - Drive: 400 V / 2.4 kW - Required space (approx.): W 600 x H 1,950 x D 800 mm - Weight (approx.): 350 kg