Susitraukimo tunelis

AMTEC POF-L HS (high speed)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard Gsdpoh Ek Daefx An Hjbu = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: naujas, Gamybos metai: 2025, Sleeve wrapper/film banding machine for packaging very large products. Includes shrink tunnel. Features automatic product feeding, automatic transport into the tunnel, and discharge. Gbsdpfx Asv Nl N Ron Heu - Specifications (depending on actual product dimensions): • Power supply: 380V, max. 40kW • Compressed air: approx. 6 bar • Maximum machine cycle rate (idle): 8 cycles/minute • Maximum product dimensions (mm): W (approx. 1000–1200) × H (approx. 500–600) • Machine dimensions (mm): L (approx. 5600–9500) × W (approx. 2000) × H (approx. 2000) • Weight (net/gross): approx. 1400–2400 / 1600–2700 kg. Please note that our new prices are often lower than typical used equipment prices. Feel free to send us your inquiry and let us know your packaging requirements. We typically have 30–50 different new machines available from stock at all times. For machines custom-built to client specifications, we offer very short delivery times starting from approximately 3 weeks. All machines are available with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Sleeve packer/film banding machine for packaging large products. Includes shrink tunnel. Fully automatic product feed, automatic transfer into the tunnel and discharge. - Specifications: Power supply: 380V, 21.0kW; Compressed air: 0.6m³, 6.0Bar; max. idle cycle rate: 10 cycles/minute; max. product dimensions (mm): W750xH300; machine dimensions (mm): L5060xW1150xH2000; weight (net/gross): 1200/1400kg. Please note that our new prices are often below the usual used equipment prices. Feel free to contact us and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times from approx. 3 weeks. - All machines are available with full warranty. Gbodpfxsv Nl N Do An Hju

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, KALLFASS folijos vyniojimo linija su termotuneliu Įranga susideda iš: 1) Kallfass Universa 8060/200 folijos vyniojimo/suvirinimo mašinos 2) Compact 650SO termotunelio Gbjdpfswcnqcsx An Hou 3) Išvežimo konvejerio sistemos (papildomai) 4) Supakuotų paketų saugojimo įtaiso (papildomai) Pakuojamas produktas Inversa aparate įvyniojamas į pusiau uždarą folijos rankovę, užlydomas, po to termotunelyje Compact susitraukia, tada per konvejerinę sistemą perkeliamas į paketų saugyklą. Daugiau techninės informacijos – žiūrėkite nuotraukas Prašome rašyti el. paštu arba skambinti

Gamybos metai: 2025, būklė: naujas, X-ray inspection system designed for trays, cartons, and large bags. Suitable for the detection of foreign bodies such as metal, glass, stone, plastic, etc. in food or non-food products. – Specifications: Conveyor belt width: 600 mm; Detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic substances such as stone, glass, from Ø 1.2 mm; X-ray power: 150 kVp, 7.5 mA; Detector resolution: 0.4 mm; X-ray emission: < 1 µSv/h; X-ray beam: horizontal scanning; Conveyor belt height: 750 ± 30 mm; Conveyor belt speed (depending on product): 10 – 60 m/min; Control interface: 15" touchscreen; Software: intellisens®X-ray; Operating temperature: 5 – 35 °C; Ejection system: optionally available according to requirements; Power supply: 220VAC, 50/60Hz; System dimensions: L1800xW1300xH1900 mm; Weight: 580 kg. Please note that our new prices are often lower than the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. – We usually have 30–50 different new machines available for immediate delivery from stock. For machines manufactured to customer specification, we offer very short delivery times starting from approximately 3 weeks. – All machines come with a full warranty. Gbsdev Nm Izepfx An Hsu

Būklė: naudotas, Gamybos metai: 1993, Filtro plotas: 121 m² Godpfx Aeyk H Uujn Hebu Oro našumas: 13 200 m³/h Ventiliatorius: 15 kW RIEDEL ištraukimo įrenginys su ląsteline sklende - Pagaminimo metai: 1993 - Nuo buvimo vietos - Visiškai veikiantis Techniniai duomenys: - Filtravimo plotas: 121 m² - PP adatinis veltinis su BIA sertifikatu - Ventiliatorius: 15,0 kW - Oro našumas: 13 200 m³/h - Ląstelinė sklendė su ištraukimo loveliu - Variklinė kratymo sistema 0,18 kW, sprogimui atspari - Šilumos grąžinimas - Sauso gesinimo linija drožlių silosui - HC priešgaisrinis vožtuvas - Ventiliatoriaus variklis: 1,1 kW - Žiedinė linija tarp siloso ir ląstelinės sklendės - Horizontalus perjungimo vožtuvas 900x400 mm su svirtimi

Būklė: naujas, Gamybos metai: 2025, PRO version of the shrink tunnel for processing very large and very wide products in POF film at high speed. – Ideally combined with the AMTEC Shrink SIDEshrink W60XXXL PRO version. Dual air circulation, adjustable airflow, suitable for large products and/or high-speed packaging (recommended for SIDEshrink and FLOWshrink machines). – Max. product dimensions: L(unlimited)xW1100xH230 mm; Tunnel size: L2400xW1200xH280 mm; Machine dimensions: L2400xW1600xH1260 mm; Power consumption: 380V, 28kW. Godpfxov Nmade An Hebu Please note that our new prices are often below typical used equipment prices. Feel free to contact us with your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from around 3 weeks. – All machines come with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Shrink tunnel for large products, PRO version for perfectly consistent temperature, ideal in combination with the AMTEC MAXIshrink W15 4XL PRO version. Suitable for polyolefin films. Speed and temperature adjustable. Specifications: 380V, 24 kW; Speed: 0-30m/min; Temperature: up to 175°C; max. product dimensions (mm): W940xH250; machine dimensions (mm): L2800xW1460xH1280; weight (net/gross): approx. 350/400kg. Gbedpfxov Nl Umj An Hju Please note that our new prices are often lower than typical used equipment prices. Feel free to ask for a quote and tell us about your packaging requirements. – We always have 30-50 different new machines available immediately from stock. For customer-specific machines, we offer very short delivery times starting from approx. 3 weeks. – All machines come with full warranty.

Būklė: naujas, Gamybos metai: 2025, Sleeve wrapper/film banding machine for packaging large products. Fully automatic product infeed, automatic transfer into an optional tunnel (SHRINKtunnel-PE-XL), and outfeed. - Specifications: PLC from MITSUBISHI/Japan; 380V, 2kW; 6 bar, 0.1 m³/min; maximum machine cycle rate in idle mode: 25 cycles/minute; maximum product dimensions (mm): L700 x W500 x H330, (W+H Gedpfxov Nl Ime An Hobu

Būklė: naujas, Gamybos metai: 2025, The SHRINKtunnel can be combined with the AMTEC Shrink Wrapper SPEEDshrink 35L. High-speed shrinking at 0–20 m/min for POF film (polyolefin). – Specifications: Max. packaging dimensions: W550 x H250 mm; tunnel dimensions: L1500 x W650 x H300 mm; power supply: 380V, max. 18kW; machine dimensions & weight: L1800 x W1140 x H1300 mm, 700 kg. Please note that our new equipment prices are often lower than the typical prices for used machinery. Feel free to contact us with your specific packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty. Gedpfov Nl Tvsx An Hobu