Plaučių. Sriegimas sriegikliais + stendinis grąžtas

ALIA TOOL JUNIOR

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 105 mm, tekėjimo skersmuo: 610 mm, veleno greitis (maks.): 3 500 aps./min, veleno skylė: 70 mm, X ašies eiga: 580 mm, Y ašies eiga: 210 mm, Z ašies eigos atstumas: 1 137 mm, tvirtinimo skersmuo: 63 mm, sukimosi greitis (maks.): 6 000 aps./min, įvesties srovės tipas: Oro kondicionierius, Įranga: sūkių greitis be galo kintamas, The machine is in good condition. Major maintenance work in recent years: 30.04.2020 Milling spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: ·Error message at startup ·Coolant for internal cooling flows out at the rear side of the milling spindle ·Overload message when the machine is cold and rapid traverse is at 100% ·Over 150 various tool holders ·Spare bushings for the tool magazine ·Spare limit switches for the tool changer position monitoring ·2 pieces 3-jaw chuck, diameter 250 mm (mounted during inspection) ·1 piece 3-jaw chuck, diameter 250 mm ·1 piece 3-jaw chuck, diameter 300 mm ·1 piece 4-jaw chuck, diameter 400 mm ·2 sets hard jaws for external clamping, short version ·1 set hard jaws for external clamping, long version ·Various sets of soft jaws, used ·Replacement filters for the Kowap high-pressure unit (5 pieces in stock, approx. 2 pieces by delivery – 1 filter approx. 20-25 CHF) ·Coolant purification system or oil separator (custom-made) ·Cabinet suitable for the tool magazine, adapted for KM63 holders and numbered with 80 slots ·Specific clamping accessories suitable for KM63 holders, which allow direct clamping of indexable inserts ·Iscar side milling cutter suitable for one holder, D160mm, width 4mm ·Gear cutter suitable for one holder (custom-made – for soft jaws p=1.5mm) ·Cleaning/deburring brush suitable for one holder We can also provide you with leasing and financing offers for the machine. An inspection appointment can be arranged upon request. Hsdpsxp Hmaefx Af Ijng

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Machining Center – Vertical / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of manufacture: 1999 The machine can be inspected under power and in operation by appointment. Well-maintained, very good condition, fully functional. Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and counter bearing (like new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/Axis drives: - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed rate: 0 - 30,000 mm/min - Rapid traverse X, Y, Z: 30 m/min - Ballscrew diameter/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Path measuring system: - Input resolution: 0.001 mm Work spindle: - Drive power (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69871-A: SK40 - Tool clamping force: 12,000 N Tool magazine / changer: - Tool change system: Pick-up - Number of magazine stations: 24 positions - Max. tool diameter with free adjacent positions: 80/140 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec Hsdpov Nxbysfx Af Ieng - Magazine rotation speed: 47 rpm - Max. load capacity of tool magazine (24 x 3 kg): 72 kg Machine table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (fixture weight): 500 kg - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and counter bearing (like new) - Direct measuring system - ICS, 15 bar - Coolant system (emulsion) - Electronic handwheel - Chip conveyor - Documentation - CE marking No guarantee for completeness and accuracy of technical details and equipment. - Subject to prior sale -

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2017, veikimo valandos: 6 900 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 300 mm, Maksimalus ruošinio svoris: 500 kg Judėjimo eigos: X: 350 mm Y: 250 mm Z: 300 mm Hsdpev Ai Ukefx Af Ieng C: 360° Pagaminimo metai: 2017 16 vietų RTC keitiklis

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 52 000 mm, bendras plotis: 24 000 mm, bendras aukštis: 10 500 mm, įėjimo įtampa: 400 V, darbinio aukščio: 1 050 mm, bendras svoris: 2 000 kg, suslėgto oro jungtis: 6 juosta, gręžimo skersmuo: 180 mm, oro slėgis: 6 juosta, įėjimo dažnis: 50 Hz, įvesties srovės tipas: Oro kondicionierius, galia: 2,5 kW (3,40 AG), 8. Sep | Bohrmaschinen METRAL Doppelkopf-Bohrmaschine TD3-2000, Baujahr 2003, komplett überholt 2023 Hederg E Hcjpfx Af Ijng Technische Daten: Glasdicke: 2–50 mm Bohrdurchmesser: 3–180 mm Gewicht ohne Rollentisch: 775 kg Anschlussleistung: 2,5 kW Abmessungen ohne Rollentisch: 1,3 x 1,7 x 1,2 m Abmessungen Rollentisch: 5,2 x 2,4 m / Höhe 1050 mm / ±25 mm Maximaler Abstand Maschinenrahmen bis Bohrzentrum:

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, - USADA - CURVADORA DE TUBOS EJES: 3 DIÁMETRO MÁXIMO DEL TUBO: 30 x 2 mm LONGITUD DE TRABAJO: 3.000 mm VELOCIDAD DE POSICIONAMIENTO EJE X: 900 mm/seg VELOCIDAD DE CURVADO EJE Y: 200°/seg Hedpfx Ajvhc Uuof Ieng VELOCIDAD DE GIRO EJE Z: 360°/seg RADIO MÁXIMO DE CURVADO: 20 A 170 mm UNIDAD DE CONTROL: DNC800

Sąlyga: naujas, Gamybos metai: 2026, The ERBA Turbo 60 is a centrifugal finishing machine for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via frequency converter. The Turbo 60 is available in both dry and wet versions. It can be optimally linked with the ERBA YE-60 separation unit shown in the images. Technical Data: - Gross volume: 60 L - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilt motor, soundproof lid, or separation box Prices are net plus the currently applicable statutory VAT and shipping costs. Some images may show the machine with accessories and options which are available at extra cost. If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. Hjdpfx Aen Ut Ilsf Iong The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations take place by means of telecommunication (email, telephone, messaging portal). As a first step, we will send you a non-binding quotation, which also includes our general terms and conditions (with imprint) and information about your right of withdrawal before any purchase or contract is concluded.

Sąlyga: naujas, Thread diameter M6 - M24 mm Speed 200 rpm Radius 1200 mm Angle adjustable from 0 to 90 degrees Machine weight approx. 0.4 t Space required approx. 1.4 x 0.1 x 0.7 m Electric Tapping Machine / 4450124SET Fast and precise thread cutting with freely positionable pivoting arm - Machine head can be swiveled from 0 to 90 degrees - Quick-change chuck with slip clutch for safe thread cutting without risk of breakage - Reversible machine head (right/left rotation selectable) - Adjustment of thread size, speed, pitch, and cutting depth via touchscreen on the pivoting arm - Manual mode: After reaching the preset cutting depth, the spindle stops automatically and the forward/reverse run must be activated manually. - Automatic mode: After reaching the preset cutting depth, the machine automatically switches from forward to reverse – ideal for tapping multiple blind holes. Hodpfog N Nl Dex Af Iong Includes 1 each of tapping chuck GT24: M6, M8, M10, M12, M14, M16, M18, M20, M22-24 Base frame 900 x 600 x 875 mm

Gamybos metai: 1985, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 04.2187, Hydraulic Internal Broaching Machine Hnsdpsixntwjfx Af Isg in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985, overhauled Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Pulling force: 10,000 kg at 3 m/min Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return stroke speed: hydraulically infinitely variable from 7 m/min to 30 m/min Maximum stroke: 1200 mm Broaching tool clamping: universal pull head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table aperture: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Sąlyga: naudotas, Thread diameter M3 - M12 mm Continuously variable speed 400 rpm Torque 25 Nm Air pressure 6 - 8 bar Working range radius 1000 mm Machine weight approx. 12 kg Demo machine! Pneumatically driven tapping machine for M3 - M12 threads featuring: - Robust and flexible working arm. - 6 pcs. quick-change chucks with slip clutch. Documentation in English! Optional: Hnsdpfxjfg U Sms Af Ijg - Clamping table with T-slot clamping surface 900 x 600 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 930088, Country of Manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net Weight (machine + cabinet): 3250 kg + 400 kg Customs Tariff Number: 8456.30 20 Dimensions: 260x281x225 cm TECHNICAL SPECIFICATIONS Machining Type: immersion Maximum workpiece dimensions: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table size: 900x600 mm Floor to table distance: 900 mm Total dielectric volume: 1200 L X, Y, Z, U, and V axes X, Y, Z travels: 550 x 350 x 400 mm U, V travels: 550 x 350 mm Anti-collision protection: X, Y, U, V, Z axes Taper machining, max. cone: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (option 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: double Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type Hnjdpfxsw Ucyus Af Ijg All technical data provided without liability for errors or omissions.