Azoto generatorius, azoto gamykla

Airtech Stickstoff GmbH -Parker NITRO-Source Plus

Sąlyga: naujas, Gamybos metai: 2025, Parker-Airtech presents the latest generation of nitrogen generators, which stand out on the market with an outstanding air factor. Our systems are characterized by the exclusive use of high-quality components, ensuring their longevity and reliability. The cost-efficient operation of the system is marked by low power consumption at maximum output, low-maintenance operation, no need for additional gases such as hydrogen for oxygen reduction, and the use of high-quality, durable components. This enables the system to achieve amortization within the shortest possible time. An intelligent monitoring system allows for continuous supervision of operating parameters and ensures that you are always informed about the status of your system. Whether you are in the office or on the go – our system is easily accessible via your mobile phone, so you always have control over your nitrogen production. The system is tailored to your individual requirements. Bledpfx Aajnq Dkiohed Parker-Airtech is committed to offering you the best technologies to optimally support and maximize your processes. Rely on innovation, quality, and performance – choose Parker-Airtech.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 990 h, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras aukštis: 3 900 mm, įėjimo srovė: 63 A, bendras ilgis: 9 500 mm, bendras plotis: 4 500 mm, galia: 15 kW (20,39 AG), Įranga: dokumentacija / vadovas, Pelletizing plant suitable for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn straw, etc.), as well as feed materials. This is a complete system mounted on a base frame and consists of the following components: - Raw material storage container, 4m³, including agitator. This has been extended with wooden panels to approximately 3-4m³. - Intermediate screw conveyor to the hammer mill - Hammer mill, 11 kW, for shredding wood chips or other materials - Inclined mixer for material homogenization including moisture measurement, dosing unit, and level monitoring - Dosing container for press additives, feeds into the inclined mixer - Dosing screw for optimal material feeding to the pellet press (speed controlled) - Pellet press, 15 kW, including full sensor, temperature monitoring, and discharge chute Bljdpfx Aaoxv Dkcshod - Conveyor belt to the dedusting sieve - Dedusting sieve with material discharge at 3m height The plant is designed for easy expansion with a second 15 kW press. The entire system is centrally controlled via a Siemens PLC with touch display. All operating parameters are monitored, and the press will shut down automatically in the event of a fault. Remote operation and monitoring of the press is possible via any PC. The chip dryer shown on picture 2, mounted on the wall with discharge and control system, can also be purchased. For further details, please contact us.

Sąlyga: naujas, Gamybos metai: 2025, Parker-Airtech presents the latest generation of nitrogen generators, which stand out on the market with an outstanding air factor. Our systems are characterized by the exclusive use of high-quality components, ensuring their longevity and reliability. The cost-efficient operation of the system is marked by low power consumption at maximum output, low-maintenance operation, no need for additional gases such as hydrogen for oxygen reduction, and the use of high-quality, durable components. This enables the system to achieve amortization within the shortest possible time. Bjdpfxowzv Hcj Aahsld An intelligent monitoring system allows for continuous supervision of operating parameters and ensures that you are always informed about the status of your system. Whether you are in the office or on the go – our system is easily accessible via your mobile phone, so you always have control over your nitrogen production. The system is tailored to your individual requirements. Parker-Airtech is committed to offering you the best technologies to optimally support and maximize your processes. Rely on innovation, quality, and performance – choose Parker-Airtech.

Gamybos metai: 2025, Sąlyga: naujas, Parker-Airtech presents the latest generation of nitrogen generators, which impress the market with an outstanding air factor. Our systems are distinguished by the exclusive use of high-quality components, guaranteeing their durability and reliability. Bedpfxowzv Hij Aahsld The cost-effective operation of the system is highlighted by low power consumption while maximizing output, low-maintenance performance, no need for additional gases like hydrogen for oxygen reduction, and the use of premium, long-lasting components. This enables an exceptionally rapid return on investment for the system. An intelligent monitoring system allows for continuous supervision of operating parameters and ensures you are always informed about the status of your unit. Whether in the office or on the go – our system is conveniently accessible via your mobile phone, so you always maintain control over your nitrogen production. The system is customized to your individual requirements. At Parker-Airtech, we are committed to providing you with the latest technologies to optimally support and maximize your processes. Rely on innovation, quality, and performance – choose Parker-Airtech.

Gamybos metai: 2010, Sąlyga: labai geros būklės (naudotas), Kammer innen: 2000 x 1250 x 1250 mm Innenvolumen: 2344 Liter Bis zu 400 °C (Leistung 33 kW) Vorheizen / Trocknen für manuelle, zyklische und CNC-Bearbeitung bis hin zur interaktiven Konturenprogrammierung. Abgedeckte Führungsbahnen (DGP) für hohe Langzeitpräzision. Direktantrieb vom Motor zur Hauptspindel für ruhigen Lauf. Umlaufschmiereinheit mit Filterung zur Schmierung des Präzisionshauptspindellagers. Kombinierte Steuereinheit für wirtschaftlich vorteilhafte Programmierung und Maschinenbedienung sowie optimalen Zugang zum Arbeitsbereich. Länge: 2500 mm Breite: 2015 mm Höhe: 2900 mm Gewicht: 4000 kg Bljdpfx Aajuqkwfohsd

Sąlyga: naudotas, Gamybos metai: 2004, veikimo valandos: 2 130 h,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, TECHNICAL SPECIFICATIONS Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distance Between T-slots: 65 mm From spindle centre to underside of counterholder: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal: 4000 mm/min Cross: 4000 mm/min Vertical: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swivelling: 0-140° Spindle feed Quill diameter: 90 mm Quill travel: Manual Feed: 75 mm Weight: Approx. 2300 kg SCOPE OF SUPPLY Includes, among others (list not exhaustive): Bodpfxewuurwe Aaheld ABENE milling machine Heidenhain control Toolholder set Coolant pump Levelling feet Mounting block Complete operating documentation Exact scope of supply according to photo series.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, X ašies eiga: 2 050 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 750 mm, įrankių magazino lizdų skaičius: 36, stalo ilgis: 2 200 mm, stalo plotis: 850 mm, valdiklio modelis: OKUMA-OSP-HMI, aušinimo skysčio tiekimas: 15 juosta, atstumas nuo stalo centro iki veleno galo: 950 mm, ašies variklio galia: 22 W, ašies skaičius: 36, greitasis eiga Z ašyje: 16 m/min, greitas poslinkis X ašimi: 16 m/min, greitas poslinkis Y ašis: 16 m/min, veleno nosis: BT 50, veleno greitis (maks.): 10 000 aps./min, veleno greitis (min.): 50 aps./min, stalo apkrova: 2 500 kg, įrankio skersmuo: 120 mm, įrankio ilgis: 400 mm, įrankio svoris: 20 g, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, 3-axis vertical machining center with OKUMA-OSP-HMI CNC Bodpfxou Dinko Aahjld

Sąlyga: naudotas, Vertikalus apdirbimo centras Daewoo (Doosan) ACE VC500. Įrenginį galima apžiūrėti mūsų sandėlyje Gussago BS. Mimu įrankinės staklės, Gussago BS, Italija. Apdirbimo centras – tai įrankinė staklė, aprūpinta skaitmeniniu valdymu, galinti atlikti kelis mechaninius veiksmus su vienu ruošinio užspaudimu keliuose to paties ruošinio paviršiuose. Paprastai turi kelias judėjimo ašis, automatinę įrankių keitimo sistemą ir kartais kelias paletes. CNC tipas: Heidenhain. Veleno sūkių skaičius: 12000. Bjdpjtzgaqjfx Aahjld

Gamybos metai: 2003, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 1 used underwater pelletizing system, partially overhauled in 2023 Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Bljdpeiyyf Iefx Aahod Heat exchanger Control system Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.