Stūmoklinis kompresorius

Aircraft Hoku BK 119-270-10-V-Palette

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Dcedpfx Asfxyhfoahjd Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: naujas, Kepimo krosnis picai su dviem aukštais, garų gaubtu ir fermentacijos kamera GMG Kepimo kamera visiškai pagaminta iš ugniai atsparaus akmens Temperatūros diapazonas: 50–400°C Priekinė pusė pagaminta iš nerūdijančio plieno Skaitmeninis valdymas Viršutinė ir apatinė kaitra reguliuojamos atskirai Skaitmeninis viršutinės ir apatinės kaitros parametrų stebėjimas Skaitmeninė klaidų kodų sistema Aukšto patvarumo, atspari temperatūrai durų konstrukcija su spyruokle Dviejų stiklų durys, sustiprinta izoliacija ir oro cirkuliacija Išoriniai matmenys: 149 x 110 x 194 cm Vidiniai matmenys: 105 x 70 x 15 cm Elektros galia: 2 x 8 kW – 3NAC I 400 V Fermentacijos kamera: 149 x 93 x 90 cm – 3 kW ir 230 V Svoris: 500 kg Dcjdsuu H Alspfx Aahsd

Būklė: naujas, Bernardo Horizontal Bandsaw HBS 275 – 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Djdpod Du T Iofx Aahecd Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H):1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw band • Workpiece stop • Base frame • Pressure gauge for band tension • Vice with quick-action clamp • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Gamybos metai: 2017, būklė: beveik kaip naujas (naudotas), used RENNER REKO 550/50VE air compressor 10 bar with petrol engine For operations without a power supply (e.g. roadside assistance vehicles or tyre service) The compressor is used, year of manufacture 2017, and has 50 operating hours. The petrol-driven, robust piston compressors offer you, in addition to the well-known advantages of RENNER systems, especially flexible compressed air availability on construction sites, in service vehicles, and for many other applications "without a socket". They guarantee a consistent supply of compressed air, independent of location. The smaller model is mobile and can be quickly relocated thanks to its ergonomic handle, while the larger version can be easily moved and loaded onto vehicles by pallet truck or forklift due to its compact design. VE = electric start. Please note: delivered without battery. Technical data: - Intake capacity: 550 l/min - Effective delivery rate: 400 l/min - Petrol engine: 3.6 kW Honda unit with 4.8 HP - Max. pressure: 10 bar - Cylinders/stages: 2/1 - Speed: 1400 RPM - Sound pressure level: 98 dB(A) Dcodpfx Asd H Dr Seahsd - Air receiver: 50 l - Dimensions (L x W x H): 810 x 460 x 830 mm - Weight: 70 kg Visit our store in Erlangen. We have a wide selection of new and used compressors.

Būklė: naujas, Turning diameter: 400 mm Turning length: 1,000 mm Speed range: 70 - 2,000 rpm Weight approx.: 500 kg Description: - Lead and feed screw lathe with robust construction and user-friendly operation. TM 4010D equipped with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of the headstock housing due to heavily ribbed GG cast iron - Hardened and ground face spindle ensures exceptional precision and durability - High metal removal rates during roughing allow for finest surface finishes and tight tolerances - Wide range of threads and feeds without the need to change gears in the gear train - Bed guides are hardened and precision-ground - Main spindle with perfect concentricity mounted in precision ball bearings - Mechanical longitudinal feed stop for the carriage with four adjustable eccentrics - Electronic main spindle brake - All controls (electrical) centrally accessible - 4-way longitudinal stop - Quick-change tool post SWH 3 TM 4010D – Digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed, and glare-free - Increased working accuracy - Error rate reduced - X-, Y-, Z0-, Z-axes each with 8-digit display - Glass measuring scales Equipment details: Feed gearbox – All gears made of steel, hardened and ground, shafts on needle bearings, all components lubricated in an oil bath Apron – Completely sealed housing with safety device to prevent simultaneous operation of thread cutting and feed mechanisms Tailstock – Hardened and ground quill, generously dimensioned, with scale Prismatic bed – Heavily ribbed cast iron, high rigidity Machine lamp – Complete illumination of work area Main spindle – Perfect running accuracy, high load capacity, mounted in precision taper roller bearings Machine base – Assembled Tool compartment Operator panel – User-friendly membrane keypad, machine lamp, coolant pump, direct drive, 2-speed motor switch, emergency stop pushbutton Coolant tank – Removable, fill level indicator, easy and complete draining and cleaning Control cabinet – Well arranged, 24V DC power supply, all contactors and relays by Schneider or Siemens Chip tray – Hinged, easy chip removal Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6-MK 4 - Change gear set Technical data: Length: 1,950 mm Width/Depth: 820 mm Height: 1,530 mm Max. length: Max. width/depth: Max. height: Dsdpfxed Eauke Aahscd Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Phases: 3 phases Current type: AC Mains frequency: 50 Hz Spindle mount: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar capacity diameter: Ø 53 mm Chuck diameter: Chuck actuation of clamping movement: Center height: 200 mm Center distance: 1,000 mm Swing over bed: 400 mm Swing diameter:

Būklė: naujas, Grinding range: 2 - 20 mm Point angle min./max.: 90 - 135 degrees Connection rating: 230 V Machine weight: approx. 8.6 kg Dcjdjupxkwepfx Aahjd Space requirement: approx. 0.35 x 0.2 x 0.2 m Packaging dimensions: 340 x 270 x 410 mm Weight: 8.6 kg

Būklė: naudotas, Gamybos metai: 1988, Plate width 2000 mm Plate depth 3500 mm Plate height 270 mm Weight 5.5 t +++++ Please note that the machine is dismantled and ready for loading. For this reason, a demonstration under power or the production of a video is not possible. Dodpfx Aaoiiii Sohocd Furthermore, our listing contains the most informative photos in the best possible quality. Unfortunately, sending additional pictures is not possible. +++++

Būklė: naudotas, Gamybos metai: 1999, Saddle Stitcher Heidelberg ST 100.1, year 1999 - 8 Feeders DVA (4x double feeders) - 1 Cover Feeder UFA - Stitching Unit Heidelberg 100.1 - Three-Knife Trimmer - Band Delivery - Includes Compressor - 2x Hohner Stitching Heads - Minimum format (uncut): 89 x 120mm - Maximum format (uncut): 305 x 349mm Online video inspection via Skype. We would be delighted to welcome your visit – additional machines in stock. Available immediately – inspection possible. Located in Emskirchen / Nuremberg – test runs can be arranged. Dcjdjqpplwepfx Aahed

Gamybos metai: 2004, būklė: geras (naudotas), Atlas Copco XAS 67 Compressor Output: 3.7 m³/min Operating hours: 2,371 h Deutz engine Type: diesel Dcedpeiywpzsfx Aahed

Būklė: geras (naudotas), Gamybos metai: 1972, Hohner Favorit Stitching Machine, year of manufacture 1972 Runs smoothly and works perfectly Dedpfx Aouiyqweahocd Includes manual and spare parts list Power connection: 380 V Dimensions: W 70 cm x D 74 cm x H 146.5 cm, weight 280 kg