AHENA

AHENA BOILER K.CAL /H 500.000

Būklė: beveik kaip naujas (naudotas), Manufacturer: Varian Type: NHS-35 Condition: The pump is in very good condition and, if required, is also available with an angle valve! Warranty: 3 months Dsdpfehmba Ajx Akkock Delivery time: ex stock

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), air-cooled process chiller: refrigerant R32 Cooling capacity 72 kW at 7/12°C, integrated P3 pump, built-in 410 l tank, winter package for outdoor installation down to -25°C ambient temperature, including speed-controlled fans Djdsf H A Eyepfx Akkeck large Dixell display with protective cover,

Būklė: labai geros būklės (naudotas), Standartinis katilas 30 t/val. Pagaminimo metai: 2012. Su dviem alyvos degikliais. Dcodpfexgn Itex Akksk

Būklė: naudotas, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle arrangement: - Bottom 5.5 kW - Right + Left 11 kW - Top 7.5 kW - Universal 5.5 kW Each spindle with individual motor Number of steel feed top rollers: 5 Number of rubber feed top rollers: 3 1 rubber roller in the table Extraction port diameter: 150 mm Stepless feed speed adjustment: 4–24 m/min Feed via cardan shafts Dcsdsmiik Tspfx Akkjk Table lubrication pump Pressure: 6 atm Electric body lifting Power supply: 400 V Overall dimensions: Length: 4240 mm Width: 1550 mm Height: 1560 mm

Būklė: naudotas, Vertical Multistage High-Pressure Centrifugal Pump GRUNDFOS As-new pump, however, a part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Power supply: 400 Volt, 50 Hz Power: 3 kW - 9-stage pump assembly Dcsdpfofupadex Akkek - made from stainless steel 1.4401 - The as-new pump was used as a spare part donor, but several new pump chambers are included - a part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packed in original wooden crate Pump dimensions LxWxH: 1100 x 250 x 300 mm Shipping crate dimensions LxWxH: 1400 x 330 x 340 mm Weight including shipping crate: 85 kg As new condition Not a submersible or immersion pump.

Būklė: naudotas, Gamybos metai: 2016, Overview The filling line for glass bottles (single-use and returnable) was in operation until recently at a small brewery in Germany. The system is designed for 0.33l longneck bottles and can fill up to 2,500 bottles per hour. The machine is still in operation and can be inspected by appointment at any time. The bottle washer and depacker can also be purchased separately. Technical Details Capacity: 2,500 bph Formats: Set up for 0.33l longneck Filling temperature: 6°C Packaging: - 0.33l longneck in 24-unit folding cartons - 0.33l longneck in 24-unit modular crates Individual Machines / System Components - New glass depalletizer | Füllmeister | - | 2016 - Filler + Capper | H&K | VVF 14/3 | 1966 2016 major overhaul: with pre-evacuation, new rotary joint, new stainless steel table, new electrical system, new stainless steel control cabinet for the valves, 0.33 liter bottle guide set, Sihi vacuum pump, seals for lift cylinders and filling valves replaced in 2023, vacuum and overpressure valves fitted with new seals and springs in 2023 - Bottle Depacker | Joha | - | 1982 Pack head for 24 bottles in modular crate - Bottle Washer | Silmo | Praktika | 1983 Bottles per row: 12 - Labelling unit | Krones | Vinetta | 1999 Type 480-6-3-180 Labelling stations for back labels, front and neck ribbons, each with three glue pallets and gripper sponges, glue pallets, gripper sponges, and sponge roller at the bottle outfeed replaced new in 2023, glue pump Krones Unipump-H with glue heater - Packer | Pexco | - | - 1 head for 24 bottles in modular crates; new electrical system installed and machine overhauled in 2016 - Residual liquid and mouth control | Miho | LC2000 | Residual caustic detection from bottle washer, control of bottle mouth for crown caps/metal, incl. Silmo inspection screen for visual inspection of cleaned bottles - Crate Washer | Fleischer | - | - For cleaning empty plastic crates via in-line process, module size: 300x400mm, overhauled in 2016 - Compressor | Alup | Allegro 19-10 | 2016 Oil-free, 4,897 operating hours Dcjdpfx Ael Hx Rpokksk Transport - Bottle transport: various conveyor belts + 90° bends - Crate transport / roller conveyor: overhauled in 2016 with stainless steel side rails and legs

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, slėgis: 16 juosta, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, temperatūra: 400 °C, įėjimo įtampa: 6 000 V, sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 1 500 aps./min, aušinimo tipas: oras, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed and never commissioned, still covered by manufacturer’s warranty. Following a revision of the long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator, complete as per original OEM supply, is now available for sale. The unit is NEW, manufactured and fully tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in a controlled indoor environment. Immediate availability allows you to bypass the usual production lead times, which for this kind of equipment are typically 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual casing turbine (Steam Part A + Steam Part B) - 3-shaft integrated gearbox (2 pinions + central gear) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - 3-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, prepared for parallel grid operation Systems included: - Integrated oil system in base frame - Main mechanical oil pump and auxiliary electric oil pump Djdpoyidvdsfx Akkjck - Local control panel on skid - Control and protection panel equipped with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Possibility of installation and commissioning with manufacturer support Possible fields of application: - Biomass and waste-to-energy plants, for production of electricity and process steam, with immediate unit availability — no multi-year production lead times - Industrial cogeneration (CHP) in plants with continuous process steam usage (paper, food, chemical, and manufacturing industries) - Revamping/repowering of existing plants, as a fast-track alternative to new OEM supplies with 24–36 month delivery times Price: Upon request. Further technical information and documentation available upon request.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Sawmill for Sale: The production line starts with a Bongioanni band saw and a Costa Multiprisma saw. Thanks to their design, they are suitable for processing both softwood and hardwood species. Dcsdev Hm T Sjpfx Akkjk The price includes all machine lines, auxiliary equipment (dust extraction, recycling machines), as well as the necessary saw blades and spare parts. The sawmill can be inspected in Cegléd, Hungary by prior arrangement. 1. Production Line: - 1-1 Log yard with log feeder - 1-2 Costa Multiprisma: 280 twin-shaft prismatic log turner, 60-80 m³/8h depending on wood type and diameter - 1-3 Roller conveyor with ejector - 1-4 Custom-built cross-cut saw: for single-size cuts, adjustable sizing - 1-5 Conveyor belts for chip and scrap transport - 1-6 Drum chipper - 1-7 Chipper conveyor systems: screw conveyor, bucket elevator, chute, for direct loading into railcar/truck 2. Production Line: - 2-1 Log storage with log feeder - 2-2 Log conveyor with ejector - 2-3 Intermediate log buffer with log feeder - 2-4 Bongioanni log band saw and carriage, 1300 digital control, multiple pre-set sizes, blade deviation sensor, laser guide, 25-45 m³/8h depending on wood type, diameter, and cutting pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with log feeder - 2-7 Storti TGS-78 cross-cut saw: digital control, three saw units for double size cutting capability - 2-8 Roller conveyor with graders - 2-9 Intermediate prism storage - 2-10 Roller conveyor - 2-11 Costa Leopard II series optimising saw, dual-shaft automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for chip and scrap removal - 2-14 Drum chipper - 2-15 Chipper conveyor systems: screw conveyor, bucket elevator, redler conveyors (walking floor truck loading capability) 3. Auxiliary Equipment: - 3-1 E. Gillet resaw band saw with associated conveyors, manipulator, feed unit - 3-2 Joiner’s band saw (800 mm) - 3-3 Pallet block cross-cutting machine (star turret) - 3-4 SOCOLEST Valdoi twin-edger circular saw with conveyors and cross-cut circular saw - 3-5 VEB STANDARD single-shaft formatting circular saw - 3-6 STVO single-shaft formatting circular saw

Būklė: labai geros būklės (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, 1 naudotas garo katilas ----- - su gofruotu degimo vamzdžiu ir užlenktais dugnais - Djdpfx Akextndnoksck Gamintojas: STANDARD Šildymo paviršius apie: 240 m² Galingumas: 13,4 t/val. Maks. darbinis slėgis: 14,0 bar Bandomasis slėgis: 18,2 bar Vandens tūris apie: 18 160 l Pagaminimo metai: 1988 Įrengtas su Saacke gamtinių dujų degikliu, tipas DG 80, dujų reguliavimo linija, valdymo spinta, maitinimo vandens siurblys ir esamomis stambiomis ir smulkiomis armatūromis.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Galimas Cremona džiovintuvas. Sekcijų skaičius: 6, temperatūros zonos: 2, vėsinimo sekcija: 1, plotis: 4200 mm. Gamybinis našumas: apie 80 lapų/min. Dokumentacija yra. Galima apžiūrėti vietoje. Dcsdew I E Dpepfx Akksk