Elektrinis variklis 0,25 kW 670 aps./min.

AEG AM80NY8

Sąlyga: naujas, *TECHNICAL SPECIFICATIONS:* Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (L x W x H): 1,414 x 503 x 1,350 mm (without connections when using constant bypass) Weight: approx. 225–320 kg Heat transfer fluid connection: Flange DN25 PN16–40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS:* – Control and regulation unit: smart controller (7'' touch display) – Heating control via solid-state relay – Switch cabinet IP54 – Cooling managed by solenoid valve – Flow measurement based on differential pressure principle – Bypass between supply and return line with reduced cross-section – Level monitoring by magnetic float switch – Flow monitoring by measuring heating element surface temperature and flow rate – Dirt filters in cooling water inlet and in the return flow of the circulation system – Monitoring of supply temperature by electronic safety temperature limiter – External oil filler neck – Dilo fittings on internal pipe connections (except pump connections) – At 350°C: constant bypass including bellows valves – Connection for nitrogen blanketing with pressure gauge and safety valve (0.5 bar at 350°C) (option) Visit our website for more details or for different performance classes. *The unit is compliant with European directives. Other directives and standards are only considered fulfilled if stated in the order confirmation. This technical specification represents the standard equipment; customer requirements deviating from the standard will be shown in quotations and/or order confirmations.* Cajdsg Ey Rfopfx Admoa

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, padavimo eiga Y ašimi: 6 000 mm, Tipper tray for logs up to 6 m in length. Available from September 2024. Cjdpfx Ador Iig Dsmsaa

Gamybos metai: 1997, Sąlyga: visiškai atnaujintas (naudotas), 2 units of process design volute casing pumps 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals renewed. Codeiuznuopfx Admsaa Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication on drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: duplex steel Noridur 1.4593 (9.4460) Wear plate: duplex steel Noridur 1.4593 (9.4460) Pressure cover: duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: duplex steel Noridur 1.4593 (9.4460) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Suction side nominal pressure: PN 10 Discharge side nominal pressure: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine engineering

Sąlyga: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* Codpfx Adeg Ezarsmjaa - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition Cajdpfx Adorigxyjmja

Sąlyga: naudotas, Hydraulic power unit, hydraulic pump, universal unit - Manufacturer: H+L, hydraulic power unit for hydraulic punching machine - Type: DK52 1-6-250P-391K - Motor: Junginger 5.5 kW / 1455 rpm - Pressure gauge: up to 250 bar - Pressure accumulator: Hydac 2.5 liters - Hydraulic tank/filter/valves: see photos Caedpfxof Tdt Is Admja - Dimensions: 540/630/H1210 mm - Weight: 198 kg

Gamybos metai: 2023, veikimo valandos: 11 h, Sąlyga: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: MA0144_1922, Exhibition unit: Kaeser SX 8 Screw Compressor (10 bar) with SIGMA Control 2 Year of manufacture: 2023 Operating hours: 1 h Technical data: Free air delivery at 7.5 bar: 670 l/min Motor power: 5.5 kW Electrical connection: 400 V / 3 phase / 50 Hz Dimensions (W x D x H): 590 x 632 x 970 mm Weight: 155 kg Compressed air connection: G 3/4" Sound pressure level: 64 dB(A) Visit our showroom in Erlangen. Casdpfx Aeh Ey Rcodmoa On more than 450 sqm of exhibition space, you will find a wide selection of used and new compressors.

Sąlyga: naujas, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTED FEATURES: • Smart Controller Plus 7" touchscreen / Industry 4.0 compatible • Flow measurement, adjustable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-sub connector 20mA/TTY • Connection for external temperature sensor PT 100 for measuring and displaying tool temperature • Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers • High-performance pump, hydraulic parts in stainless steel (VA), magnetically coupled • Tool emptying via suction • Booster pump for unit filling at high temperatures Cedpfx Aoftm Hrodmsaa • Filling via cooling water switchable to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European directives. Other directives and standards are only met if listed in the order confirmation. This technical specification reflects the standard equipment. Customer requirements deviating from the standard will be specified in quotations or order confirmations.

Sąlyga: naudotas, Thickness planer D 510 - Maximum planing width: 51 cm - Maximum planing height: 25 cm - 4-knife cutterblock, Tersa knives - 2 rollers integrated in the table surface - 4 feed speeds selectable via switch - Electric brake - Weight: 800 kg, year of manufacture: 2006 - Cutterblock speed: 6,000 rpm - Electric table lift - Electronic height display for processed workpiece dimension Cedpfx Adjq R U Thomjaa

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M-900iA/260L R-30iA, keliamoji galia: 260 kg, rankos pasiekiamumas: 3 100 mm, valdiklių gamintojas: Fanuc, valdiklio modelis: R-30iA, teach pendant gamintojas: Fanuc, Įranga: dokumentacija / vadovas, IRS Robotics® atnaujintas pramoninis robotas Apima mūsų garantiją ir išsamią 77 punktų protokolo patikrą, kurią atlieka mūsų vidaus robotikos inžinieriai. Prekės ženklas: FANUC Tipas: M-900iA/260L Valdiklis: R-30iA Keliamoji galia: 260 kg Cajdpsp T Umqefx Admea Darbo diapazonas: 3,1 m Bendra paskirtis: Didelės apkrovos, ilga svirtis Roboto masė: 1800 kg Pristatymo laikas: Pagal susitarimą IRS Robotics® atnaujintas: 77 punktų protokolas – pilnai patikrinta mūsų testavimo stenduose, naujas tepalas/aliejus, naujos baterijos, visiškai išvalytas, dažytas Jūsų pageidaujama RAL spalva. Įskaitant tikslumo matavimus (pakartojamumas, tikslumas, laisvumai) Apie įmonę: Kasdien pristatome atnaujintus A-Brand robotus: ABB – KUKA – ABB – YASKAWA. Veikiame nuo 2002 m. Pristatome visame pasaulyje.