Vandens šilumokaitis

Sanyo SGP-WE170J2 50kw

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Set for producing finger-joint connections for medium and large-scale production. The machine is technically efficient and in good condition. The set includes several tool kits. Characteristics: – Industrial set with one tenoner. Batch feeding under operator supervision enables processing of lower grade raw material as well, – Operation controlled by microprocessors (automatic control), – Batch rotation after each operation on a rotary table (straight finger-joint connection) or tilting the batch rearward (furniture joint on a line; unique GOMA solution), – The set includes an automatic loading station for the press, – Possibility to use mid-cutting on the press, TENONER WITH FEED TABLE Specification Values Milling spindle diameter 50x210 mm Spindle speed 6000 rpm Motor 18.5 kW Tool dimensions 250x160 mm Saw spindle for end trimming Special chipper 300x8 mm Motor 6 kW / 3000 rpm Stepless feed table Fodpfxolu D Tfo Ab Ssft Working width x height 600 x 30-160 mm Glue nozzle outline according to tool FC-10 PZ6/2 PRESS Specification Values Board width 30-160 mm Board thickness 20-70 mm Finished board length 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic pump 3 kW / 140 bar

Sąlyga: paruoštas naudoti (naudotas), An air-conditioned office and commercial container by Aztech is available. U-value: approx. 0.38W-0.46W/m²K, floor load capacity: approx. 100kg/m², internal height: approx. 2500mm, external dimensions (L/W/H): approx. 3000mm/3000mm/2600mm, weight: approx. 800kg. Documentation available. On-site inspection possible. Fsdjw D Eubepfx Ab Sjft

Gamybos metai: 2021, Sąlyga: beveik kaip naujas (parodų įrenginys), Overband Plate Magnet Ffedpjd Evl Defx Ab Set Design in stainless steel 1.4301, hermetically welded including cleaning drawer 800 x 500 x 180 mm fully welded housing lifting eyes for suspension

Gamybos metai: 2006, veikimo valandos: 15 000 h, Sąlyga: geras (naudotas), For sale is an Erema 1007T. Ffsdpfx Aoumubyob Sjt Year of manufacture: 2006 Operating hours: 15,420 Throughput capacity: 250–350 kg/h The system is currently processing HDPE but is also suitable for other plastics such as LDPE. The machine can be inspected during ongoing operation. A new extruder screw was installed in February.

Gamybos metai: 2008, Sąlyga: beveik kaip naujas (naudotas), Polytype 8-Color Cup Printer, model BDM 691, year 2008 Colors: 8 colors Maximum output/hour: 36,000 cups/hour Minimum cup diameter: 60 mm Fodpfxshbdacj Ab Soft Maximum cup diameter: 100 mm Minimum cup height: 35 mm Maximum cup height: 160 mm UV System: Uviterno Pre-treatment: Corona, Arcotec Reference: B-21020

Sąlyga: labai geros būklės (naudotas), Kaeser Omega 83 P pūstuvo blokas, atnaujintas, 12 mėn. garantija, HB 1300 Fedsncd Apjpfx Ab Soft

Gamybos metai: 1998, Sąlyga: beveik kaip naujas (naudotas), VAN DAM 568 COM III 8 Colour Cup Printer 560 COM III 8-colour cup printer, the machine is in good condition. The specifications are listed below. Ffedpsh Ha I Ejfx Ab Set Machine type: Cup printing machine Brand: Van Dam Model: 560 COM III Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Condition: In good condition If you have any questions regarding the machine or its specifications, please feel free to contact us at any time.

Gamybos metai: 2004, Sąlyga: dilaminuotas dirbtuvėje (naudotas), No. 2054 1 used, partially overhauled, and function-tested Alphatec extruder, type AE-S 75.28 Screw diameter: 75 mm – 28 L/D Drive: 75 kW AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW Ffedpfx Absiyx Uzj Sjt 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Inspection possible at our facility in Wuppertal. Further extruders available.

Gamybos metai: 1997, Sąlyga: visiškai atnaujintas (naudotas), 2 units of process design volute casing pumps 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals renewed. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication on drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: duplex steel Noridur 1.4593 (9.4460) Wear plate: duplex steel Noridur 1.4593 (9.4460) Pressure cover: duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: duplex steel Noridur 1.4593 (9.4460) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Suction side nominal pressure: PN 10 Discharge side nominal pressure: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Ffsdpfx Ajiuznujb Sjt Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine engineering

Gamybos metai: 2024, Sąlyga: naujas, Overview – of the various configurations *not every position is needed: Fjdpsff Sbiofx Ab Ssft Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstration unit with discharge (only shown schematically in the image) *optional, if feeding with wheel loader is desired Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4 m Four sieves are mounted on the underside, which are extracted. Unit price net from: €9,750 - Extraction components / hoses flat rate €945 net - Control system for entire plant Unit price net: €2,750 - Demonstration extraction unit MMJET 160 demo, with cleaning function Connection 160, Fan 2.2 kW Air capacity 1850 m³/400 V automatic compressed air cleaning Unit price net from: €6,950 - Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour at +/- 20 kg tfrom €59,995 net *A reference system (baler) is located at ZIP code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height adaptable upon request) Weight of bale +/- 20 kg (depending on material) Capacity: approx. 30 bales per hour Storage bin approx. 0.7 m³ volume Fill level sensors for min./max. fill level in the bin Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale ejection Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 kg mütek balers / packaging machines were developed for producing bales from various materials such as shredded miscanthus or elephant grass, wood shavings, sawdust, and shredded straw. The machine features robust construction, ensuring consistent quality during continuous operation. The baler compresses the material filled in the storage bin without any additional binding agents by means of hydraulic pressure and packs the material in plastic bags. The machine allows significant volume reduction, depending on the material. Maximum material moisture must not exceed 18% Atro. The mütek baler’s container can be filled automatically or manually and has a capacity of approx. 0.7 m³. Containers with larger volume or with integrated extraction and filter systems as a complete disposal unit are also available. In addition to automatic filling via de-dusting units, mütek also offers filling by means of screw conveyors. Both variants allow automatic dedusting. mütek balers are equipped with a control cabinet for system management. In the standard version, bale dimensions (width x depth x height) are 400 x 400 x 800 mm. Upon request, height can be adapted to your requirements. The following advantages result from baling: - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Raw material requirements: - dry (max. 30% ATRO) - max. 35 mm length