Kelių ašmenų

A.Costa LINCE 5/25

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, Wide-belt sander DMC USK 1350 M3 – Made in Italy – Cross-belt unit (so-called 'sergeant') – Year of manufacture: 2011 – Electric and pneumatic ionizer TECHNICAL SPECIFICATIONS: Sanding width: 1350 mm Blodpfx Asgr Er Sedmjr Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st unit: Cross-belt (so-called 'sergeant') Motor power: 12 kW 2nd unit: Rubber roller Hardness: 95 Shore Diameter: 240 mm Motor power: 18.5 kW 3rd unit: Rubber roller Hardness: 55 Shore Roller diameter: 300 mm Motor power: 15 kW 4th unit: Pneumatic pad Motor power: 15 kW 5th unit – Cleaning brush – 2.2 kW 6th unit – Air blower Blower for the belt Pneumatic oscillation Feed speed: 2.5 – 18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Gamybos metai: 1997, Sąlyga: geras (naudotas), • Working width (mm): 1300 • CSD system • Cross sanding unit • Longitudinal sanding unit - shoe • Brush unit Bodpfoidi Ivex Admslr • Ionization

Sąlyga: naudotas, Maximum cutting length: 4,000 mm Saw blade diameter: 400 mm (max. 450 mm) Length adjustment: Manual Angle adjustment: Manual Blodpfx Ajp E I S Redmjr Double-sided mitre circular saw Düspohl DGK 400 B for double-sided mitre cuts with top-mounted saw unit and additional horizontal milling cutter (for cornice moulding function).

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, We offer for sale a wide belt sander SANDYA 16-S RRCS 1350. The machine is fully operational and has seen little use, serving as an auxiliary machine for specialized projects. STANDARD EQUIPMENT * Control panel * Electric adjustment of working height * Digital display of working thickness * Feed belt made of natural rubber * Automatic centering and tensioning of feed belt * Movable rubber pressure rollers before and after working units * Flexible steel pressure bar before the first working unit * 2 roller supports with 2 non-driven rollers at the infeed and outfeed of the machine * Electronic sanding belt oscillation * Extraction nozzles designed to reduce air consumption * "Hand guard" emergency device at the entry point of the workpiece * Safety switches at the front and rear of the machine * Lockable main switch * Automatic "star-delta" main motor switch * Main motor overload protection * Automatic brake for immediate shutdown of working units * Automatic emergency stop in the event of: - sanding belt breakage - lack of sanding belt tension - lateral displacement of sanding belt - absence of compressed air - main motor overload * Electric motors with insulation class IP 54 TECHNICAL DATA - Working width: 1,350 mm - Min./max. working thickness: 3-170 mm - Sanding belt width: 1,375 mm - Sanding belt length: 2,620 mm Machine configuration: - B/23 * Reading beam for segmented shoes with 23 sections FIRST UNIT "R" - 200 mm diameter steel calibrating roller, 18/5 kW - Pneumatic on/off selector for the first roller, operated by a pneumatic actuator, including micrometric position adjustment corresponding to sanding belt thickness - Oscillating blower for cleaning the sanding belt of the first unit Complete with: • Electronic positioning • Timed activation synchronized with presence of workpiece • Extraction nozzle • Filter and pressure regulator SECOND UNIT "R" - 250 mm diameter, 55SH rubber sanding roller, 15 kW - Pneumatic on/off selector for the second roller, actuated by pneumatic cylinder, including micrometric position adjustment according to sanding belt thickness - Reverse motion of the second unit Blodpfjwq Efmex Admer THIRD UNIT "CS" - 175 mm diameter sanding roller - Electronic segmented pad on the 3rd unit With LOGIC TS electronic controller • Sector spacing: 60 mm • Adjustable working pressure - Pneumatic on/off selector for the third roller Roller supports at infeed and outfeed for long workpieces Fixed cleaning unit at the machine outfeed Electronic positioning of the work table The machine was purchased new from an authorized SCM Polska dealer and has always been serviced by authorized SCM service. Last calibration carried out on 16-01-2025 Machine available from mid-July Total operating hours: 589h

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, bendras ilgis: 4 400 mm, darbinis plotis: 1 400 mm, aukščio reguliavimo tipas: elektrinis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Hello, we offer for sale a Heesemann LSM 8 wide belt sander in a configuration with four sanding units: cross-belt unit / longitudinal unit with calibration drum / longitudinal unit with reverse / longitudinal unit with de-dusting brush The machine has undergone mechanical refurbishment and inspection, checked and set up, ready for operation. Year of manufacture: 1997 Feed speed: 5-25 m/min – infinitely adjustable from the control panel Working height: 880 mm Workpiece thickness: 3-80 mm Bodpeu Hlzfsfx Admolr Power requirement: 107 kW – at full load Total weight: 10,250 kg Control: control panel with physical buttons and display Control and abrasive belt change side: right Single, perforated feed belts, perforated table with channel and vacuum fan – for safe transport of short workpieces. Element hold-down: rubber-coated rollers, diameter 70 mm. Abrasive belt Q unit: 5,400 mm x 150 mm Motor power: 13/17 kW – two-speed motor – belt speed 12 m/s / 24 m/s "Sergeant" belt: 4,850 mm x 141 mm Longitudinal belt L unit: 2,620 mm x 1,450 mm Motor power: 16.5 kW / 21 kW – two-speed motors – 10 m/s / 20 m/s Pressure: Hold-down beams with computer-controlled selective pressure adjustment – CSD® system for seamless, multi-row feeding with smooth adjustment of individual pressure elements. Controller roller reading distance: 16 mm. Abrasive belts feature a cleaning system – air blast and dust extraction. Workpiece thickness tolerance compensation up to 2 mm via maintenance-free electromagnetic hold-downs. Working width as well as the start and end position of the sanding pressure beam are electronically controlled. Abrasive belt cleaning via blowing tubes; dust extraction via integrated extraction channels; air blast activation is automatic upon workpiece detection in the machine. At the end: cleaning/de-dusting brush, 150 mm diameter, with extraction channel for dust removal. Additional blow rotors at the machine outfeed with an extraction channel. Commissioning at your location and basic operational training – to be arranged. Price negotiable on request, machine available immediately.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006530, Maks. apdorojimo plotis: 1300 mm Min. apdorojimo storis: 3 mm Bsdswcybmspfx Admolr Darbo stalas: fiksuotas aukštis Vakuuminis transporteris: taip Darbo agregatų skaičius: 8 vnt.

Sąlyga: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 3 200 mm, ašies skersmuo: 60 mm, veleno greitis (maks.): 6 000 aps./min, frezavimo įrenginio galia: 7 500 W, sukimosi greitis (maks.): 6 000 aps./min, bendras aukštis: 600 mm, reikalingas plotis: 8 000 mm, vietos reikalavimas ilgis: 7 000 mm, bendras svoris: 15 500 kg, frezos veleno ilgis: 600 mm, pjūklo disko skersmuo: 400 mm, galia: 70 kW (95,17 AG), įėjimo įtampa: 380 V, aukščio reguliavimo tipas: elektrinis, padavimo variklio galia: 7 700 W, darbinio aukščio: 120 mm, darbinis plotis: 160 mm, Didelio našumo langų gamybos staklės, su 2 gręžtuvais ir dviem dešiniais bei vienu kairiuoju profiliavimo velenais, gamina tiesioginius langus 68, 88 ir 130 mm storio. Pristatymas pagal susitarimą. Bljdpfx Adotp Dngjmjr

Sąlyga: naudotas, Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: LB431013A, darbinis plotis: 1 350 mm, bendras svoris: 7 200 kg, galia: 79 kW (107,41 AG), įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, Costa Levigatrici K7 CCCFF 1350 skirta medinių paviršių apdirbimui: šlifavimui, valymui ir šepečiavimui masyviems, faneruotiems arba laminuotiems ruošiniams. Darbinis plotis – 1350 mm, instaliuota galia – 79 kW, todėl įrenginys puikiai tinka pramoniniam naudojimui stalystės dirbtuvėse, baldų gamyklose ar gamybos linijose. Užtikrinamas didelis tikslumas ir aukščiausios kokybės paviršiaus apdaila. Turime dvi tokias mašinas, abi pagamintos 2014 metais. Techniniai duomenys: Maitinimas: 400 V / 50 Hz Instaliuota galia: 79 kW Pagaminimo metai: 2014 Bendras svoris: 7.200 kg Darbinis plotis: 1350 mm Blodsxm R Szopfx Admsr