Keturpusės obliavimo staklės

A.Costa EURO 23B

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller, 65 Shore, rigid sanding platen Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Conveyor carpet oscillation, pneumatic Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units equipped with emergency stop device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta starting Complete documentation Note on used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-works, loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in writing. Ndedpoychqzofx Af Hea (Inquiries will only be answered with your address and telephone number!)

Būklė: naudotas, Plieninė konstrukcija kranų įrenginiui Plotis: apie 8,5 m Ndodobruzgepfx Af Hja Ilgis: apie 7,95 m Įrenginys išmontuotas Įrenginys parduodamas „toks, koks yra“ Apžiūra: Kviečiame apžiūrėti prekę – tiesiog susisiekite su mumis ir susitarkite dėl apžiūros laiko. Dėmesio: garantija netaikoma, keitimas neleidžiamas, grąžinti negalima.

Būklė: naudotas, mašinos/transporto priemonės numeris: 007984, Didžiausias apdirbamas plotis: 1300 mm Mažiausias apdirbamas storis: 4 mm Darbo stalas: fiksuoto aukščio Njdpfewqdbmex Af Hsda Vakuuminis konvejeris: taip Darbo agregatų skaičius: 4 vnt

Būklė: naudotas, Gamybos metai: 2016, Panel saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control unit Os Labeling labeling unit with onboard graphic marking, including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Motorized rollers for side loading on lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic identification of disposable sacrificial panels based on thickness data stored in the machine Low stack stop Automatic side loading. Includes: stop grids, double photocell, control keypad, electrical pre-installation for two motorized infeed roller conveyors, and reinforcement with 4 rollers instead of fork slots in the infeed conveyor Intermediate roller conveyor Side infeed roller conveyor, dimensions 3800 x 2200 mm with motorized rollers (floor height 325 mm) Dead roller conveyor for longitudinal offcuts for corner systems, 4500 mm (total length 7295 mm) Nsdsuc Idxjpfx Af Hsda 3000 mm extension for dead roller conveyor to also handle cross-cut offcuts Long chute for manual transport of cross-cut pieces to the central dead roller conveyor Air flotation unloading table, 2050 x 850 mm, equipped with wheels on the front Air blower unit for up to 6 air flotation layers MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the crosswise axis; this device enables reduction of the minimum panel length for cross-cutting from 1830 mm to 1220 mm Automatic device for detecting saw shaft deflection on angled cuts (longitudinal and transverse), consisting of a sensor capturing deflection directly at the saw arbor and a device counting blade revolutions directly at the saw chuck Keypad for remote cycle start Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the crosswise axis Main saw blade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed 1–140 m/min with brushless motors Longitudinal pusher carriage speed 90 m/min Transversal pusher carriage speed 135 m/min Double pusher carriage: 6 clamps on the longitudinal slide + 10 clamps on the cross slide (8 fixed + 2 on the cross slide, Multi-Pusher system) Cutting system for thin panels

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, veikimo valandos: 180 h, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 8 000 mm, bendras plotis: 1 200 mm, bendras aukštis: 1 300 mm, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 400 V, galia: 10 kW (13,60 AG), SOEST Universal Surface Treatment Line for oiling, staining, lye treatment, patination, etc. Primarily designed for parquet surfaces up to 40 cm workpiece width. 1) Roller machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Brushing machine VP-400-1B-2P-2B with one brush, two disc pads, and two additional brushes, for applying, working in, or patinating surface media into pores and/or for removal, distribution, or working depending on the desired surface effect. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four spare brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface treatment line is built for professional industrial use and is configured with the highest level of equipment. A wide range of accessories such as additional rollers and cleaning machines are included (see pictures!). Very robust construction, all motors are frequency-controlled (Siemens). Speeds are infinitely adjustable for both forward and reverse operation. Maximum workpiece width approx. 410 mm. Ndsdpfx Afoyaiafs Hea The system is in excellent condition, with only around 180 operating hours, and is therefore considered as good as new. This surface machine was only used as a backup line in a parquet production and was deployed only for specific surface techniques, hence the very low operating hours. That means the line was used only sporadically between 2019–2022. In 2023, our company downsized, and the system has been stored since then—immediately available and therefore in almost mint condition! We no longer require this system and are therefore selling it. The original purchase price of this line in 2019 was approximately €87,000; the current price is negotiable! Viewings of this line are welcome by prior arrangement. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video is for reference only and shows a similar system configuration!)

Būklė: labai geros būklės (naudotas), bendras ilgis: 3 000 mm, bendras plotis: 1 500 mm, Skydinių plokščių presas labai geros darbinės būklės + Grecon finger jointing Ndodpfjt Uduxex Af Hsa

Būklė: naudotas, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle arrangement: - Bottom 5.5 kW - Right + Left 11 kW - Top 7.5 kW - Universal 5.5 kW Each spindle with individual motor Number of steel feed top rollers: 5 Number of rubber feed top rollers: 3 1 rubber roller in the table Extraction port diameter: 150 mm Stepless feed speed adjustment: 4–24 m/min Feed via cardan shafts Table lubrication pump Pressure: 6 atm Electric body lifting Power supply: 400 V Overall dimensions: Length: 4240 mm Width: 1550 mm Height: 1560 mm Njdpfx Afjmiik Tj Heda

Būklė: naudotas, Plieninė konstrukcija, skirta kranų sistemai Plotis: apie 8,3 m Ilgis: apie 5,1 m Ndsdpfxsbruzbs Af Hea Sistema išmontuota Sistema parduodama „tokia, kokia yra“ Apžiūra: kviečiame apžiūrėti prekę – tiesiog susisiekite su mumis ir susitarkite dėl trumpalaikės apžiūros. Dėmesio: garantija netaikoma, keitimas negalimas, prekė negrąžinama.

Būklė: labai geros būklės (naudotas), Keturių pusių obliavimo staklės Weinig Hydromat 23C Darbinis plotis: 230 mm Darbinis aukštis: 160 mm Velenų kiekis: 7 Velenų išdėstymas: 1. Apačia 15 kW 2. Dešinė 7,5 kW 3. Kairė 7,5 kW 4. Viršus 15 kW 5. Apačia 30 kW (daugiažiaunė) 6. Apačia 7,5 kW (hidro atrama) 7. Viršus 7,5 kW (hidro atrama) Velenų apsukų skaičius: 6000 aps./min. Veleno skersmuo: 50 mm 4 traukimo voleliai darbiniame stale Ndsdoxlcufopfx Af Hea Padavimo greitis reguliuojamas dažnio keitikliu iki 36 m/min Padavimas varomas kardaniniu velenu Pneumatiniai prispaudžiantys voleliai Techninė dokumentacija

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, mašinos/transporto priemonės numeris: 0-241-06-5232, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 12 608 h, pjovimo aukštis (maks.): 125 mm, pjovimo plotis (maks.): 2 200 mm, pjovimo ilgis (maks.): 4 300 mm, Plokščių pjūklas Holzma HKL11/43/22 Maks. pjovimo plotis: 4300 mm Maks. pjovimo ilgis: 2200 mm Maks. pjovimo aukštis: 125 mm Ndedpfx Afsxfvp Ae Hea Pjūklas yra nuolatinėje eksploatacijoje, tad galima apžiūra darbo metu. Įrenginys bus prieinamas nuo 2026-03-02.