Kitos mašinos pirkti naudotą (1 009)

Sąlyga: naudotas, Funkcionalumas: nepatikrintas, Gamybos metai: 2002, veikimo valandos: 825 h, mašinos/transporto priemonės numeris: E07.001.00, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, valdiklių gamintojas: Bachmann, eigos dažnis (min.): 8 aps./min, eigos dažnis (maks.): 40 aps./min, galia: 3,5 kW (4,76 AG), bendras svoris: 2 000 kg, bendras ilgis: 1 000 mm, bendras plotis: 1 350 mm, bendras aukštis: 2 300 mm, Įranga: CE žymėjimas, Tipinė plokštelė prieinama, dokumentacija / vadovas, Mašina tikriausiai visiškai veikianti. Tačiau paskutinį kartą naudota prieš keletą metų. Trumpas funkcijos testas buvo sėkmingas. Dcsdpfx Adjx Ah Irjmsr Presavimo jėga: 60 kN Attraukimo jėga: 40 kN Didžiausias užpildymo aukštis: 55 mm Presavimo eiga: maks. 25 mm

Sąlyga: naudotas, Sūkių skaičius: 800 aps./min. Slėgis: 400 bar Dodpfx Ajxwzakodmscr

Sąlyga: paruoštas naudoti (naudotas), Compressor GA-55 - maximum pressure: 10 bar - 131 litres/sec at 8 bar = 50.7 kW - 129 litres/sec at 9.5 bar = 56.3 kW - weight: 1,600 kg - dimensions: 2,590 x 912 x 1,790 mm Dryer FD130 - 132 litres/sec at 3° C - 165 litres/sec at 6° C - 186 litres/sec at 10° C - maximum pressure: 20 bar - weight: 200 kg - dimensions: 1,419 x 686 x 928 mm Dsdpfowxz D Isx Admecr

Sąlyga: visiškai atnaujintas (naudotas), Remontas arba naujas Servovariklis MBLE MDLU 1 2 3 Alternatyviai - BMH/BMG remontas su B 512 taškų jutikliu Saacke UWIE dalys, Strausack, Anca, Walter, Schütte, Hawema, TTB, ISOG Dcsdpog Srt Sefx Admjr Šlifavimo velenas BPH075, BPH90, BPH115 ir pan. Įvairūs NUM servovarikliai sandėlyje

Gamybos metai: 2005, Sąlyga: naudotas, Odometer reading: 371,000 km Intended use: Freight transport Serial number: WMAH21ZZ15W05xxxx Please contact ATS Norway for further information. Please quote reference number upon inquiry: 21927 Specifications: Model year: 2005 EU approval valid until: 06.12.2025 Mileage: approx. 371,000 Euro 3 Wheelbase: 450/135 cm 430 HP 2005 Maskoflex 312 p construction Movable wall Full air suspension Engine brake Turntable/steering axle Remote control Webasto heating in a cabinet Dodpfsx Am Spex Admocr Tyres (see pictures) Studded tyres on drive axle, regular tyres on remaining axles Owner reports approx. 40 meters suction hose Owner reports approx. 100% to 120 meters jetting hose Manual transmission Air conditioning Delivery by arrangement Description: 2005 MAN TGA 26.430 6x2 Vacuum/Jetting Vehicle with Maskoflex-p body. The superstructure is equipped with a movable wall. See video. Ready for delivery. Km: 371,000 HP: 429 TÜV: No EU approved until: 06.12.2025 Unladen weight: 18,180 Total weight: 27,000 Payload: 8,745 Width: 253 Length: 930 Euro: 3 Model: TGA 26.430 6x2 Vacuum/Jetting Vehicle with Maskoflex body. SEE VIDEO. Transmission: Manual

Gamybos metai: 2013, veikimo valandos: 1 765 h, Sąlyga: naudotas, General Information Intended use: Land management Serial number: 60029 Technical Information Power: 18 kW (25 hp) Fuel type: Diesel Maximum speed: 40 km/h Weights Unladen weight: 1,075 kg Payload: 300 kg Gross vehicle weight: 1,375 kg Additional Information Front tyre condition: 80% Dodpjv Rviwjfx Admecr Rear tyre condition: 80% Front tyres: - Rear tyres: - Transport dimensions (L x W x H): 3.45 x 1.61 x 2.08 m Further Information Please contact PFEIFER GROUP for more information.

Gamybos metai: 2015, Sąlyga: naudotas, 3x Yamaha G29 Dcedpsxz S S Sofx Admjr Pagaminimo metai: 2015/2016 Su krovinių dėže ir integruotu įkrovikliu Elektrinis

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, darbinė masė: 1 300 kg, Gamybos metai: 2020, veikimo valandos: 1 800 h, mašinos/transporto priemonės numeris: 01092020, Įranga: dokumentacija / vadovas, HDPE/LDPE plėvelės pirštinių gamybos mašina. Mašinos korpusas pagamintas iš plieno. Dvigubos plėvelės tiekimo stotys sujungtos sankabomis, užtikrinančiomis tolygų HDPE plėvelės įtempimą, dvigubi dažnio keitikliai kontroliuoja plėvelės vyniojimą. Mašina aprūpinta centriniu pavaros mechanizmu, kuris valdo visus pirštinių formavimo mechanizmus, užtikrindamas tikslų padavimą į suvirinimo ir gatavos produkcijos rūšiavimo tašką. Pilnos komplektacijos mašina su šiais moduliais: plėvelės padavimas, suvirinimas, atskyrimas ir perforacija, rūšiavimas bei atliekų paėmimas. Dcjdpfxoxmvu Uj Admjr

Sąlyga: geras (naudotas), Berger Model: PSS 8 Berger Sun Simulator Pulsed Solar Simulator Solar Simulator PSS 8 230 Volt 50 Hz 1000W 3.15ATT Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) Dcsdodii Dtepfx Admjr For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Trumpf Vectormark Laser Marker Spare Parts Carrier We offer you a Trumpf Vectormark Laser Marker here. Trumpf Vectormark Trumpf VMc2 Model: VMc2 Condition: For spare parts/parts carrier Dcjdpfx Ajfn Rhasdmor Scope of delivery: (see photo) (Subject to changes and errors in technical specifications!) If you have further questions, we will be happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a used eurokraft computer cabinet. Product Description: Robust, powder-coated sheet steel construction. Overall dimensions: Height x Width x Depth: 1638 x 600 x 350 mm. Enclosure for flat screen monitor, lockable. Acrylic glass pane, H x W: 420 x 450 mm. Internal dimensions: H x W x D: 548 x 598 x 330 mm. PC cabinet with side door, lockable. Internal dimensions: H x W x D: 480 x 570 x 348 mm. Worktop dimensions: Width x Depth: 900 x 600 mm, thickness 25 mm, melamine resin-coated. Technical data: Total height: 1638 mm Total width: 600 mm Total depth: 350 mm Monitor compartment internal dimensions (H x W x D): 548 x 598 x 330 mm Max. monitor size (TFT): 20 inches Body material: powder-coated sheet steel Ventilation: passive ventilation (ventilation slots on sides) Protection class: IP20 Feature: lockable Version: with worktop Monitor compartment: included Worktop dimensions: 25 x 900 x 600 mm Weight: 44 kg Product type: computer cabinets Dedpfsqa Dd Ajx Admjcr Body color: blue-grey RAL 7031 Type: eurokraft basic computer cabinet Condition: used Scope of delivery: (See image) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Morphologi Image Analysis Device We are offering you a Morphologi image analysis unit. Image analysis device for particle size determination Morphologi G3SE Advanced Particle Characterization The Morphologi G3 system is an advanced and easy-to-use instrument for particle characterization by measuring particle size and shape in the range of 0.5 micrometers up to several millimeters. It combines the required flexibility for research and development applications with the security of user-independent results and validation mechanisms for automated quality control, all in one instrument. This technology is frequently used in conjunction with laser diffraction particle size analysis to gain a deeper understanding of product or process behavior. Model: Morphologi G3SE Manufacturer: Malvern Objectives: 2.5x; 5x; 10x; 20x; 50x Type: Morphologi G3SE Djdpfxjf S Ih Se Admjcr Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and correction!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Henkel UVALOC 400 Loctite 97039 Curing Chamber Dcsdjtv H A Tepfx Admjr The UVALOC 400 curing chamber (LOCTITE 97039) is a flood exposure curing system designed for curing light-curing adhesives using UVA radiation and visible light. It is suitable both for manual curing of individual items during production and for laboratory use. Integrated into the device: - Control unit with integrated main switch and operating hours counter - Lamp housing with burner - Reflector - Ignition unit Supplied in UV-protection enclosure Features: - Equipped with a 400 W metal halide lamp - Optimized for light output in the UVA range - Typical curing area: 10 x 19 cm - Expected UV lamp service life: up to 1,000 h - Power supply can be detached and operated separately from the lamp module - Adjustable lamp height for optimal exposure - Includes glass filter to prevent shortwave UVB/UVC emission Technical data: - Power supply: 230 V AC ± 4%, 50 Hz - Power consumption: approx. 460 W - Main fuse: 2 x 5 A, slow-blow - Glass tube fuse: 5 x 20 mm - UV lamp warm-up time: 3 minutes - Lamp type: 400 W high-pressure metal halide bulb with double-ended base - Lamp service life: approx. 1,000 hours - Intensity: see section 5.1 - Dimensions (W x H x D): 220 mm x 472 mm x 300 mm - Ambient and operating temperature: +10 °C ... +30 °C - Storage temperature: -10 °C ... +60 °C - Weight: approx. 11.5 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, please contact us by phone.

Sąlyga: geras (naudotas), Here we offer you an Indramat main spindle unit. Indramat RAC 2.2-250-380-A01-W1 Main Spindle Unit Type: 2.2-250-380-A01-W1 Scope of delivery: (See picture) 2-week commissioning guarantee The unit comes from a warehouse clearance. Dcodpeda Itlsfx Admsr We also deliver with express shipping (DHL, UPS, TNT). If you have any further questions, we are happy to answer them by phone. Written orders are possible via email or fax.

Sąlyga: geras (naudotas), Here we offer a laser beam source from Coherent. Designation: AVIA 355-X Operating hours: Diodes 39134/45933, Head 39092 Wavelength: 355 nm Excitation: diode-pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-switch Operating mode: pulsed Laser power: 10 W @ 60 kHz Dedpfscw Dh Sjx Admocr Beam divergence:

Sąlyga: labai geros būklės (naudotas), EDAG Huf Endurance Test Bench Purpose: This test bench is intended exclusively for testing components capable of rotational and/or linear movement within the scope of endurance testing and within the limits set by the following technical data. Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight: approx. 450 kg Operating voltage: 400V / 50Hz Control voltage: 5, 24 V Preliminary fuse: 16 A Testing device: Maximum stroke: 194 mm Maximum axial force: 500 N Maximum torque: 5 Nm Dsdpfx Aovx S Apedmocr Breakaway force (manually operated slide): 15 N Displacement force (manually operated slide): 10 N Other equipment: Ρ4, 24" TFT monitor (1900 x 1080) Operating system: Windows XP Measurement and control software: LabVIEW 2011 PC interface cards: 1 card, NI PCI-6251; 1 card, NI PCI-7044 Drawer: 500 mm (full extension with automatic closing), Additional load: 500 N Lockable drawer cabinet, 3 drawers The Teach-in Endurance Test Bench is a device for conducting endurance tests on test objects that may perform rotational and/or linear movements, e.g. cylinder locks, door handles, key functions. Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), ALP Personnel Lift We are offering you an ALP Personnel Lift. ALP Personnel Lift PHCI 800 EU 1 Max. working height: 8m, Load capacity: 140 kg, suitable for indoor and outdoor use The ALP lift model PHC800 is an especially compact personnel lift, notable for its extremely small footprint and its particularly lightweight construction. The transport dimensions are very compact as well, with a height of just 1.98m and a width of only 0.77m, allowing the unit to easily pass through a standard doorway. Despite its space-saving design, the PHC 800 impresses with high performance capability. The working height of the ALP Lift PHC800 is 8m with a maximum load capacity of 140kg. The robust aluminum construction and the hot-dip galvanized chassis provide tremendous stability and maximum longevity. Like all ALP personnel lifts, the PHC series is available with either hand or foot controls and is flexible for use in both indoor and outdoor environments. All PHC lifts are developed and built according to current safety regulations and carry the CE marking. Applications: The ALP Personnel Lift PHC 800 can be delivered with various accessories, making it specifically suitable for a range of applications. Working height: 8.00 m Platform height: 6.00 m Load capacity: max. 140 kg Overall height: 1.98 m Footprint (indoor use): approx. 1.41 m x 1.39 m Footprint (outdoor use): approx. 2.43 m x 2.28 m Net weight: approx. 280 kg Dcedpfx Asvx Th Hedmor Service platform for 1 person: ALP PHCI 800 Approved for indoor and outdoor use Version: EU1 Drive / Motor: Single-phase AC electric motor 230V/50Hz 1.5KW Control: 12V/13V DC Power cable: 3x1.5 Protection class: IP 55 Type: PHCI 800 EU 1 Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors in specification!) For further questions, we are happy to assist you by phone.

Sąlyga: geras (naudotas), Siga Type: GS-517-400 External dimensions LxWxH: 4960 x 2500 x 2400 mm The entire system is DAkkS calibrated and thus approved for testing relevant to certification. Butane charging speed: — Continuously adjustable from 5 g/h to 77 g/h Fuel charging speed: – Continuously adjustable from 5 g/h to 100 g/h Fuel temperature control: – Continuously adjustable from 20°C to 50°C Selectable gasoline quantity: – From 0 l to 8 l Selectable breakthrough criterion: – From 1 g to 10 g Purge air stream temperature: – Continuously adjustable from 25°C to 30°C Precision scales for test and reference canisters: – Measuring range up to 6 kg, 0.1 g resolution Purge underpressure: – Continuously adjustable from 0 hPa to 30 hPa Purge airflow: Dcedpfxou Aa A As Admsr – Continuously adjustable from 1 l/min to 60 l/min Purge airflow humidity: – Continuously adjustable from 10% rH to 85% rH Number of cycles: 1 to 999 (charging/purging) Condition: used Sale ex location! Scope of delivery: (see image) (Subject to change and errors in technical data and information!) We are happy to answer further questions by phone.

Sąlyga: geras (naudotas), Here we offer a laser beam source from Coherent mti PC. Dcodpfxsdmzhqe Admsr Model: AVIA 355-X Operating hours: Diodes 1975/1975, Head 26488 Wavelength: 355nm Excitation: diode-pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence:

Sąlyga: labai geros būklės (naudotas), TA Instruments Dcsdehukh Njpfx Admjr Type: TMA Q400 TMA Thermomechanical Analyzer Performance: Temperature range (max.): -150 to 1,000 ˚C Temperature accuracy: ± 1 ˚C Furnace cooling time (air cooling)

Sąlyga: labai geros būklės (naudotas), Coherent Type: 205 F Laser Beam Source by Coherent COMPex Pro – Compact, Easily Integrated Excimer Laser. COMPex excimer lasers are highly efficient light sources, featuring a compact design, easy installation, and straightforward operation. They deliver outstanding results for demanding applications such as solid sampling systems (LA-ICP-MS), materials research (PLD), and precision material processing. Dcjdpfx Aevx Sz Eedmer With ceramic preionization, the COMPex provides output power in the hundreds of millijoules range, along with unmatched pulse-to-pulse stability. The COMPex also comes equipped with an enhanced gas processor, which extends both the gas and optics service life. Applications: • PLD – Pulsed Laser Deposition • Thin wafer processing • Laser lift-off / debonding • LA-ICP-MS Pulse energy1 (mJ): 400 Wavelength Max. repetition rate: 50 Hz Electrical: 230 V AC, 16 A, 50/60 Hz switchable, single-phase Dimensions (L x W x H): 1658 x 375 x 813 mm³ Weight: 325 kg Condition: used Scope of delivery: (see image) (Specifications and data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Sąlyga: geras (naudotas), TDK-Lambda Type: GEN10-240 TDK-Lambda GEN10-240 | Power Supply, DC, 1 Channel, 2U, 10V/240A, 2,400W, RS232, RS485 in a 19-inch rackmount enclosure Dcsdpouv E Auefx Admor Technical Specifications: Manufacturer: TDK-LAMBDA Power Supply Type: Programmable laboratory power supply Display Type: LED x2 Number of Channels: 1 Output Voltage: 0...10V DC Output Current: 0...240A Max. Power: 2.4kW Mounting: 19" rackmount Output Voltage Resolution: 1.2mV Output Current Resolution: 28.8mA Voltage Ripple and Noise (regulated): ≤8Vrms, ≤60Vpp Input Connection Type: Terminal block Manufacturer Series: GEN Operating Temperature: 0...50°C Dimensions (W x H x D): 423 x 43.6 x 432.8 mm Parameter Display: 4 digits Software: LabVIEW Condition: used Scope of delivery: (see image) (Model specifications may be subject to change or error; specifications provided as is!) Please feel free to contact us by phone with any further questions.

Sąlyga: labai geros būklės (naudotas), Here we offer you a plasma stripping system. Plasma stripping system absolut Plasma system for stripping DLC Vacuum chamber 200 x 200 x 200 mm Microprocessor control for gas mixtures Dsdpfxsdz Acho Admecr PC module (industrial PC) and printer for process documentation Vacuum pump, Alcatel Model ACP 28 Type: As 200 DLC Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders can be placed by email or fax.

Sąlyga: labai geros būklės (naudotas), IPG Ytterbium Fiber Laser with Control Unit We offer you an IPG Ytterbium Fiber Laser with control unit here. IPG Ytterbium Fiber Laser Djdsf T Rwqjpfx Admocr Type: YLP-C-1-100-20-20 Condition: used Scope of delivery: (see picture) (Changes and errors in the technical specifications are subject to change!) If you have any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Trumpf Model: TruPulse 44 Trumpf laser unit with laser light cable and KLH chiller Laser unit: TruPulse 44 Electrical output at nominal laser power at the workpiece: 2.0 kW Power: 2.0 kVA Current at 230 V: 9.0 A Dodpfxjv Hnz Dj Admocr Consumption data: Maximum power consumption (e.g. in service mode) Electrical output at nominal laser power at the workpiece: 2.5 kW Power: 2.5 kVA Current at 230 V: 11.0 A Mains configuration: Electrical connection values: Supply voltage: 220 V (-10%) ... 240 V (+10%) 50 Hz (-3 Hz) ... 60 Hz (+3 Hz) At nominal power (total power factor): 0.88 Insulation resistance: 400 kOhm Main fuse: 16 A Laser unit dimensions: Width 485 mm, Depth 800 mm, Height 700 mm Laser unit weight: 1.5 kN (150 kg), distributed over 4 swivel castors Chiller: KLH Kältetechnik UC3.K2W. MT-00-TLS Refrigerant: R134a / GWP 1430 Tank: 1.80 kg Supply: 3 x 400 V Frequency: 50 Hz Rated current: 4.5 A Connected load: 1.8 kW Dimensions: Length 650 mm, Depth 650 mm, Height 1100 mm Weight: 190 kg Total weight: 340 kg Scope of delivery: (see image) (Technical data subject to change and error!) For additional questions, we would be happy to assist you by phone.