Gręžimo-frezavimo staklės pirkti naudotą (121)

Būklė: geras (naudotas), Gamybos metai: 2002, Gręžimo-frezavimo staklės, gamintojas KNUTH, tipas: TBF 500, pagaminta 2002 m., su koordinaciniu stalu. Veleno tvirtinimas: MK4 Veleno sūkiai: 125-2500 aps./min. Variklio galia: 1,1 kW Stalo eiga: X 500 mm, Y 160 mm Maks. montavimo aukštis: 300 mm Veleno eiga: 130 mm Stalo dydis: 200 x 730 mm Bsdpey Spubsfx Alwjdg Staklių matmenys: plotis 1000 mm, gylis 800 mm, aukštis 1800 mm Svoris: apie 350 kg Gera būklė.

Būklė: geras (naudotas), Gamybos metai: 2003, padavimo ilgis X ašis: 3 500 mm, padavimo eiga Y ašimi: 2 500 mm, padavimo ilgis Z ašis: 1 250 mm, bendras ilgis: 7 200 mm, bendras aukštis: 5 300 mm, stalo plotis: 1 800 mm, bendras plotis: 6 800 mm, stalo ilgis: 2 200 mm, ruošinio svoris (maks.): 12 000 kg, Table Type Boring Mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Manufacturer: TOS VARNSDORF Model: WHN13CNC Control: Heidenhain TNC430 Year of manufacture: 2003 Single ownership (one previous user) Approx. 16,000 spindle hours Chip conveyor Machine under power for inspection X-axis travel: 3500 mm Y-axis travel: 2500 mm Z-axis travel: 1250 mm W-axis travel: 800 mm Table length: 2200 mm Bdodsy T E Itepfx Alwsg Table width: 1800 mm Table load capacity: 12,000 kg Spindle speed: 2,800 rpm Power: 37 kW Tool holder: 50 ISO/BT/MK Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Feed rate W-axis: 10,000 mm/min Number of controlled axes: 5 Length: 7,200 mm Width: 6,800 mm Height: 5,300 mm Weight: 36,850 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. All information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, this information does not constitute representations or contractual terms. We recommend verifying all critical details.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 000 mm, veleno greitis (maks.): 3 000 aps./min, valdiklio modelis: DIXI CNC 4400, TECHNINĖS DETALĖS X ašies eiga: 1 000 mm Y ašies eiga: 1 000 mm Z ašies eiga: 1 000 mm Vertikalus judėjimas su padėklų keitikliu (Y ašis): 880 mm Atstumas nuo veleno ašies iki stalo viršaus: 0–1 000 mm Atstumas nuo veleno ašies iki stalo viršaus su keitikliu: 0–880 mm Stalo matmenys be keitiklio: 840 x 1 000 mm Stalo matmenys su standartiniu keitikliu: 800 x 800 mm Didžiausia stalo apkrova: 2 000 kg Didžiausia stalo apkrova su padėklų keitikliu: 1 200 kg Stalo sukimas: 360° nuolat Greita eiga: 1 500°/min T formos grioveliai: 7 vienodais atstumais esantys grioveliai, plotis 18 H7 Įrankio tvirtinimas: ISO 50 Veleno greičiai: 8–3 000 aps./min. (3 intervalai) Bodpfx Aljzd Rizswsdg Variklio galia: 11 kW Variklio galia perkrovos metu: 13,75 kW Didžiausias sukimo momentas: 200 kpm Darbo padavimo greičiai (X, Y, Z): 1–9 999 mm/min Greita eiga (X, Y, Z): 9 999 mm/min Matavimo sistemos skiriamoji geba: ±0,001 mm / 0,001° Pozicionavimo tikslumas: 0,001 mm / 0,001° Atstumas nuo stalo ašies iki veleno flanšo: 390 mm iki 1 390 mm ĮRANGOS DETALĖS Valdymas: DIXI CNC 4400 Bendra instaliuota galia: 47 kW Suspausto oro poreikis: 6 kg/cm² Matmenys ir svoris Matmenys (I x P x A): 4 835 x 4 160 x 3 190 mm Įrenginio svoris: apie 17 t Suspausto oro poreikis: 6 kg/cm²

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 14008455, Fehlmann modelis Picomax 54 Heidenhain TNC 320 labai geros būklės Techniniai duomenys: - Pagaminimo metai: 2008 - Eigos X, Y, Z ašys: 500/260/480 mm - Gręžimo pinolos eiga: 160 mm - Stalo matmenys (I x P): 880 x 320 mm - Maksimali leidžiama stalo apkrova: 250 kg - Atstumas stalas – veleno galas: 0 - 605 mm - Pastūma X/Y: 1 - 2000 mm/min - Pastūma Z: 1 - 1200 mm/min - Greito įrankių keitimo sistema SF 32 - Besiūlis apsukų diapazonas: 7100 aps./min - Staklių matmenys (P x G x A): 1850 x 2550 x 2400 mm - Svoris: 2150 kg Priedai: - Heidenhain TNC 320 - 4-oji ašis su priešcentriu ir Rohm 140 mm 3-žnypliniu griebtuvu - Įvairūs laikikliai - Mikroskopas - Heidenhain jutiklis - Staklių lempa Bedpfjzgwiyox Alwodg - Aušinimo sistema

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, X ašies eiga: 5 000 mm, Y ašies eiga: 3 500 mm, Z ašies eigos atstumas: 2 350 mm, X ašies padavimo greitis: 13 000 m/min, Y ašies padavimo greitis: 13 000 m/min, padavimo greitis Z ašis: 13 000 m/min, bendras ilgis: 12 000 mm, bendras aukštis: 4 800 mm, stalo plotis: 2 000 mm, bendras plotis: 6 800 mm, stalo ilgis: 2 500 mm, gręžimo pajėgumas: 180 mm, sukimosi greitis (min.): 2 000 aps./min, padavimo ilgis W ašis: 1 000 mm, Table-type Boring Mill Juaristi - TS5 MACH-ID 9610 Manufacturer: Juaristi Model: TS5 Control: HeidenHain iTNC530 Year of manufacture: 2009 Coolant through the spindle: 20 bar Paper filter system Tool changer (ATC) with 60 positions Spindle extension: L = 550 mm Full B-axis 360.000° with ROD 880C Table load capacity: 28,000 kg X-axis travel: 5,000 mm Y-axis travel: 3,500 mm Z-axis travel: 2,350 mm W-axis travel: 1,000 mm Table length: 2,500 mm Table width: 2,000 mm Table load capacity: 28,000 kg Spindle speed: 2,000 rpm Motor power: 51 kW Tool holder: 180 ISO50 ISO/BT/MK Feed rate X-axis: 13,000 mm/min Feed rate Y-axis: 13,000 mm/min Feed rate Z-axis: 13,000 mm/min Feed rate W-axis: 13,000 mm/min Tool changer: 60 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Length: 12,000 mm Width: 6,800 mm Height: 4,800 mm Weight: 44,000 kg Bdjdpfoy Hq Dyox Alweg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute representation or contractual terms. We recommend verifying all critical details.

Būklė: naujas, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Weight approx.: 1.2 t Dimensions (LxWxH): Length 2400 mm, Width/Depth 2160 mm, Height 2300 mm, Weight 1200 kg Spindle speed: 60 – 4200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High concentricity accuracy due to tapered roller bearings, measured at less than 0.01 mm in the quill - Infinitely variable speed control - Clockwise/anti-clockwise rotation for thread cutting - X and Z axes with adjustable 55° dovetail guides - Y axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Clockwise and anti-clockwise rotation - Automatic quill feed, 3 steps, 0.04–0.15 mm/rev - Motorized feed on X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop Bjdpod H Hhzjfx Alwsdg - Cross table with T-slots and coolant channel - Central lubrication - Height-adjustable safety shield with microswitch, protects against flying chips and parts for maximum operator safety - Robust and large dimensioned cross table, precision machined with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel range: X / Y / Z axes 740 mm / 330 mm / 320 mm Dimensions and weights Length 2400 mm Width/Depth 2160 mm Height 2300 mm Weight 1200 kg Drilling and milling performance Max. face mill diameter: 76 mm Max. shank milling cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Network frequency: 50 Hz Horizontal milling table Length: 254 mm Width: 1370 mm Max. vertical spindle to milling table distance: 405 mm T-slot size: 16 mm T-slot number: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0 – 420 mm Coolant system Coolant pump(s) drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC category: C2 Travel X axis manual: 820 mm Y axis manual: 410 mm Z axis manual: 400 mm X axis automatic: 740 mm Y axis automatic: 330 mm Z axis automatic: 320 mm Vertical spindle Overhang: 0 – 420 mm Spindle taper: ISO 40 DIN 2080 Speed range: 60 – 4200 rpm Number of speed ranges: 2 Speed control: mechanical, stepless Milling head swivel range X-Y plane: 90° Milling head swivel range Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head vertical travel Z axis: 470 mm Package unit: 1

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Stalo dydis: 800 x 240 mm Stalo eigos ilgis: 400 mm Stalo skersinė eiga: 230 mm Maks. gręžimo skersmuo paprastame pliene: D 30 mm Maks. gręžimo skersmuo su horizontalia galva: D 25 mm Atstumas tarp stalo paviršiaus ir veleno galo: 60 – 360 mm Apsisukimų diapazonas: 80 – 2200 aps./min Maks. vertikalaus veleno apsisukimai: 100 – 2000 aps./min Maks. horizontalaus veleno apsisukimai: 60 – 1350 aps./min Veleno kūgis: ISO 40 Veleno eiga: 120 mm Galia: 2,2 / 1,5 kW Gręžimo talpa: 50 mm Sriegimo talpa: maks. M16 Matmenys: 1300 x 1100 x 2200 mm (P x G x A) Svoris: apie 900 kg Priedai - 3 ašių SINO indikacijos sistema - Galvos laikiklis, pasukamas 90° - 2 redukciniai įdėklai (ISO40/MK3, ISO40/MK2) - Gręžimo galvutė su kotu, skersmuo 3–16 mm Bdodpfx Aljyr Ib Eowog - 2 horizontalūs frezavimo velenai - 1 15 dalių tvirtinimo griebtuvų rinkinys, skersmuo 2–26 mm - Darbo lemputė - Aušinimo vandens sistema

Būklė: geras (naudotas), Gamybos metai: 2007, Valdymas 840 D x ašis 2500 mm y ašis 2500 mm z ašis 1700 mm Valdymo sistema - Siemens Sinumerik 840 D maks. ruošinio svoris - 6000 kg Veleno skersmuo - 130 mm Pinolės eiga - 700 mm Įrankio laikiklis - ISO 50 DIN 69871 - AD maks. sukimo momentas ant veleno - 1847 Nm Bendras galios poreikis - 65 kW Staklių svoris apie 45 t Bsdpfx Alswzyp Uowedg Užimamas plotas apie 10,9 x 9,3 x 5,7 m

Būklė: geras (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Koloninis gręžtuvas Serrmac R45 E/TR, pagaminta 2021 metais, gręžimas iki 45 mm apvalių ir sriegimas iki M26 mm, nuolatinis gręžimo pajėgumas R 50 ø 45 mm, sriegimo pajėgumas R 50 M 26, griebtuvas MK 4, griebtuvo eiga 145 mm, pinolės skersmuo 72 mm, stalo paviršius TR - pagrindo plokštė 600 x 460 mm, kolonos skersmuo 164 mm, bendras aukštis 1.986 mm, bendras plotis 675 mm, bendras gylis 1.100 mm, svoris 610 kg, Serr Mac R45 E griebtuvo sūkių reguliavimas su inverteriu, variklio galingumas 3 kW, aušinimo ir drožlių surinkimo vonelė. Bodoyh Dhwjpfx Alwedg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Naudotas kasetiniai veržlių sriegiklis FAMUP (SERRMAC) MDR16. Kasetiniai sriegiklis SERRMAC su aušinimo sistema, stovu ir vonia, naudotas. Bsdpfx Aszht Izelwodg

Būklė: naujas, Gamybos metai: 2026, - Drilling and milling machine suitable for, e.g., metal and steel construction, prototyping, plastics processing, etc. - Machining up to 3000 mm length; longer workpieces possible with multiple clamping due to removable side panels - SK 40 spindle taper - 7.5 kW drive power - User-friendly controls—no programming knowledge required Bjdsdyn Tpopfx Alwodg - Infinitely variable spindle speeds from 140 to 2000 rpm - 10-position automatic tool changer - Thread cutting up to M24 - Tool length measurement - Handwheel - Milling, drilling, flow drilling, countersinking, etc. - MADE IN GERMANY Marking out and conventional drilling/milling operations are no longer necessary, resulting in enormous time savings for the production of single parts and small series. - Table length: 3000 mm (2000–8000 mm available) - Distance table to spindle nose: 700 mm - Table width: 560 mm, T-slots M 14 - Drilling diameter up to 35 mm - Front light barrier - Coolant system - Movable 19” touch panel, Windows operating system Price on request

Būklė: naujas, Gamybos metai: 2021, Optimill MB 4PV Drilling and Milling Machine including Accessories (New, Unused Condition): Includes Accessories: - 20-piece Set of Packing Plates - RTE 165 Dividing Table - SPW 12 Clamping Tool Set, 58-piece - 4x Leveling Feet SE55 with Vibration Dampers - Collet Chuck Set MK4/M16 ER32 3-20 mm Heavy-duty, robust cast construction High running smoothness due to ground gears running in an oil bath Clockwise/counterclockwise rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed on X-axis Coolant system Machine lamp Gear head swivels ± 45° Massive, hand-scraped dovetail column guide for maximum stability and highest precision Height-adjustable, large protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling / tapping function Solid, large-size cross table, precisely machined surface with T-slots and adjustable gib strips Sturdy machine base made of cast iron with chip tray Single-speed premium industrial motor Wide speed range from 60 - 2,760 rpm via two infinitely variable speed ranges SINAMICS V20 inverter by SIEMENS Bedpfxoyxyive Alwedg Dimensions and Weights: Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drill-mill head: Drill-mill head swivel range ± 45° Drill-mill capacity: Max. facing head diameter: 63 mm Max. end mill diameter: 26 mm Drilling capacity steel (S235JR): 24 mm Continuous drilling capacity steel (S235JR): 20 mm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Milling Table Horizontal: Length: 800 mm Width: 240 mm Distance spindle vertical – milling table max.: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Coolant System: Coolant pump drive power: 100 W Standards and Approvals: Standard: DIN EN 55011 EMC class: C2 Travel: X-axis manual: 560 mm Y-axis manual: 195 mm Z-axis manual: 350 mm X-axis automatic: 480 mm Vertical Spindle: Throat: 258 mm Spindle taper: MK 4 Speed range: 60 – 2760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M16 Quill diameter: 75 mm Quill travel: 120 mm

Būklė: geras (naudotas), 4 velenų gręžimo staklės su lanksčia jungtimi Suhner tipas B 5, variklis DKM 6 4 griebtuvai po 3,2 mm Bedpfx Aeylugujlwodg

Būklė: naujas, Drilling capacity in steel (diameter): 13.0 mm X-axis travel: 300 mm Y-axis travel: 130 mm Spindle speed: 100 - 2,500 rpm Throat depth: 165 mm Spindle taper: MT 3 Table size: 490 x 120 mm Milling cutter diameter: 30.0 mm Motor: 230 Volt Total power requirement: 0.75 kW Machine weight approx.: 50 kg Space requirement approx.: 520 x 500 x 740 mm Description: - Brushless DC motor for optimal torque at low speeds - Dovetail guides on X, Y, and Z axes - Backlash-free adjustment via gib strip - Milling head swivels to both sides for angle drilling, bevel milling, etc. - Quill travel adjustable via handle, fine feed via handwheel - Precisely machined cross table with T-slots - Maintenance-free 500 W drive motor with smooth operation - Infinitely variable speed control for adaptation to the workpiece - Individually lockable guides ensure a clean milling finish Scope of delivery: - Key-type drill chuck 1 - 13 mm / B16 - Drill chuck arbor MT 3 / B16 Bdodpfsxabb Hsx Alweg - Drawbar M12 - Height-adjustable safety guard - Operating tools

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, sukimosi greitis (maks.): 4 500 aps./min, valdiklio modelis: Heidenhain TNC 310, TECHNINĖS DETALĖS Bdedpfx Aleywgtxowog Judėjimo eiga X ašyje: 500 mm Judėjimo eiga Y ašyje: 400 mm Judėjimo eiga Z ašyje: 400 mm Įrankio tvirtinimas: SK 40 Sukimosi greitis: 20–4500 aps./min STAKLIŲ DETALĖS Valdymas: Heidenhain TNC 310 Matmenys ir svoris Užimama erdvė: apytiksl. 2,15 x 2,00 x 2,50 m Staklių svoris: apytiksl. 3 t ĮRANGA Pasukamas apvalus stalas Dokumentacija

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, High-precision drilling and milling machine Fehlmann Model Picomax 54 with Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2001 >> Travel X/Y/Z: 500 / 250 / 160 mm >> Travel W: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Max. table load: 250 kg >> Distance table – spindle nose: 0 – 605 mm Bodsukf Ncspfx Alwjdg >> Feed speed X/Y: 1 – 2000 mm/min >> Feed speed Z: 1 – 1200 mm/min >> Tool quick-change system: SF 32 >> Stepless speed range: 9200 rpm >> Drive power: 5 kW >> Required space (W x D x H): 1850 x 2550 x 2400 mm About the machine: Offered is a high-precision drilling and milling machine Fehlmann Model Picomax 54 in very good condition. The machine is equipped with a Heidenhain TNC 310 contouring control. Programming is particularly simple thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented contouring controls, allowing you to program conventional milling and drilling operations directly on the machine in an easy-to-understand plain text dialog. The machine runs very smoothly even at maximum spindle speeds. Mechanically and electrically tested. Take the opportunity to inspect and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, High-Precision Drilling and Milling Machine Fehlmann Model Picomax 54 Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2000 Machine No. 14000258 >> Travel X/Y/Z: 500/250/160 mm >> W-axis travel: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Maximum table load: 250 kg >> Distance table - spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Quick-change tool system: SF 32 >> Infinitely variable spindle speed: 9200 rpm >> Drive power: 5 kW >> Required space (W x D x H): 1850 x 2550 x 2400 mm Accessories: >> Tool holders >> Heidenhain probe >> Operating manual, electrical schematics, machine books Bjdpsyu Snzefx Alwedg About the machine: Offered here is a high-precision drilling and milling machine Fehlmann Model Picomax 54 in very good condition. The machine features a Heidenhain TNC 310 contouring control. Program creation is especially simple thanks to the user-friendly Heidenhain plain-language dialog system. HEIDENHAIN TNCs are workshop-oriented contouring controls, allowing for conventional milling and drilling operations to be programmed directly at the machine in an easy-to-understand plain-language dialog. Even at maximum spindle speeds, the machine runs very smoothly. Both mechanically and electrically tested. Take the opportunity to inspect and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, High-Precision Drilling and Milling Machine Fehlmann Model Picomax 51 CNC Heidenhain TNC 360 Very Good Condition – CE Compliant Ref. Hthrgw39X Technical Specifications: Bedpfxjuxprlo Alwsdg >> Year of manufacture: 1995 >> Travel X/Y/Z: 420/240/120 mm >> W-Axis Travel: 450 mm >> Clamping Surface (L x W): 730 x 280 mm >> Permissible Table Load: 75 kg >> Distance Table – Spindle Nose: 0 – 560 mm >> Feed Rate X/Y: 1 – 7,200 mm/min >> Feed Rate Z: 1 – 3,600 mm/min >> Tool Quick-Change System: SF 32 >> Stepless Speed Range: 9,200 rpm >> Drive Power: 4 kW >> Space Requirement approx. (W x D x H): 2.0 x 1.5 x 2.4 m >> Fourth Axis Dividing Head About the Machine: Offered is a high-precision drilling and milling machine Fehlmann Picomax 51 CNC in very good condition and CE compliant. The machine features a Heidenhain TNC 360 contouring control. Programming is made particularly user-friendly via the Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented contouring controls, allowing you to program conventional milling and drilling operations directly at the machine in an intuitive plain text dialog. The tool holders (see photos) are included. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the machine under power on site.

Būklė: naudotas, Gamybos metai: 1986, Veleno skersmuo: 1 mm X eiga: 1 mm Y eiga: 1 mm Bendras energijos poreikis: 1 kW Bdedpfsylzv Aox Alwog Atsarginės dalys Dixi F310 CNC gręžimo ir frezavimo staklėms: vožtuvai jutikliai valdymo plokštės diržai

Būklė: naudotas, Gamybos metai: 1984, Svoris 1,4 t Bdjdpfsnl Nq Hsx Alwjg Mašinos Nr.: 227 geros bendros būklės: taip

Būklė: naujas, Gamybos metai: 2026, Drilling and Milling Automation Unit Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling automation unit with mobile machining head – the table remains stationary, the drilling head moves. The system can be operated both manually and fully automatically. After each drilling operation, the machining head automatically moves in the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine controller can be carried out using DXF/DWG file formats via a programming station. Alternatively, programming can also be done directly at the machine controller. The system is highly robust and assembled from proven machine components. Technical Specifications: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base • Spindle speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • Drive for X, Y, and Z axes via servo motors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top to bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St-50 (depending on tool) • Thread tapping: M4 - M30 (with floating chuck) • Y-axis travel: 300 mm • Tolerance in X-axis: ±0.1 mm • Tolerance in Y-axis: 0.06 mm • Tolerance in Z-axis: 0.06 mm Bjdpofu Ivzjfx Alwsdg • Spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Front safety with light barrier • Rear access protection with safety fence • Control: 21.5" touch-screen panel, reinforced front glass • Simple on-machine programming • Milling of elongated holes and circles • Lubrication via minimum quantity spray system • Without material clamping devices • Remote maintenance via TeamViewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Workflow simulation • Digital handwheel Your Benefits: • Workpiece surfaces remain protected • Clear, graphical user interface • Machining at the end of the workpiece is easy • 50% space saving compared to moving-table operations • Chips are collected in chip tray • Easiest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated via CAD/CAM You are welcome to visit our manufacturing/demo hall to inspect the desired system at any time. Please feel free to contact us for an appointment. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naudotas, Veleno skersmuo . mm x eiga . mm y eiga . mm Stalo ilgis 2000 mm Stalo plotis 2000 mm Stalo apkrova 25 t Techniniai duomenys pateikti gamintojo arba operatoriaus ir mums nėra įpareigojantys. Tarpinis pardavimas pasiliekamas; galioja tik mūsų pardavimo ir bendrosios sąlygos. Bdsdpfx Aljyqum Sowsg Apie mus: daugiau nei 400 nuosavų mašinų sandėlyje daugiau nei 15 000 m² sandėlio ploto, krano pajėgumas 70 t daugiau nei 10 000 priedų jūsų dirbtuvėms Jei norite parduoti įrangą, gamybos linijas ar visą įmonę, susisiekite su mumis. Daugiau pasiūlymų rasite mūsų svetainėje. Apžiūra įmanoma susitarus iš anksto. Laukiame jūsų apsilankymo! Jūsų Markus Hirsch komanda

Būklė: naujas, Gręžimo našumas pliene (skersmuo): 32 mm Išsikišimas: 200 mm Gręžimo eiga: 70 mm Pirštinės frezos talpa: 16 mm Veleno tvirtinimas: MK3 Veleno sūkių dažnis: 50–3000 aps./min Stalo skersinis poslinkis: 220 mm Stalo išilginis poslinkis: 425 mm Stalo tvirtinimo paviršius: 700 x 210 mm Maks. atstumas tarp darbinio stalo ir veleno nosies: 470 mm Bendra galingumo paklausa: 1,5 kW Apytikslis staklių svoris: 230 kg Reikalinga vieta apytiksliai: 0,75 x 1,05 x 1,2 m Gręžimo ir frezavimo staklės su galingu 2 pavarų varikliu. Prabangus valdymo skydelis. Bjdpfeupxlbsx Alwsdg Tvirtinimas MC 3 – B16. Grąžtų patronas 3 –16 mm. Sukimosi krypties jungiklis (kairė/dešinė). Veleno apsauga. Tikslus reguliavimas. Paleidimo pleištas. Sriegta strypas įrankių įtvirtinimui Priklausantys įrankiai.

Būklė: naujas, Drilling capacity in steel (diameter): 25 mm Throat depth: 185 mm Quill travel: 50 mm Spindle taper: MT 3 Spindle speeds: 50 – 2500 rpm Table traverse (cross): 178 mm Table traverse (longitudinal): 480 mm Table clamping surface: 700 x 180 mm Supply voltage: 230 V Bdsdpfod Sb Ayex Alwsg Total power requirement: 0.75 kW Machine weight approx.: 160 kg [Note: 160 t appears to be a typographical error; 160 kg is realistic for this size of machine] Space requirements approx.: 0.75 x 0.8 x 0.9 m Equipment Two-speed gearbox via flat belt (no more plastic gears!) Infinitely variable speed range Fine quill feed via engageable handwheel Digital quill depth display Forward/reverse operation Robust dovetail guideways with adjustable gibs Bellows covers for the guideways Adjustable control panel Chip guard with safety interlock Machine base stand optional.

Būklė: naujas, Drilling capacity in steel (diameter): 35 mm Throat depth: 230 mm Drilling stroke: 125 mm Spindle mount: ISO 40 Spindle speeds: 115 - 1750 rpm Table traverse (cross): 560 mm Table traverse (longitudinal): 175 mm Table clamping surface: 1000 x 240 mm Max. distance between worktable and spindle nose: 375 mm Connection voltage: 400 V Total power requirement: 0.85/1.5 kW Machine weight approx.: 0.95 t Required space (L x W x H): approx. 1.3 x 1.2 x 2.1 m Bdsdpfx Asu Imkdelwsg Equipment: - 3-axis digital readout - Digital depth display - Motorized feed for X and Y - Left/right rotation - Emergency stop - Tilting drill head - Spindle guard - Machine lamp - Toolbox with contents