Vedinės/pavaros veleno tekinimo staklės, tekinimo skersmuo virš lovos 300–399 mm pirkti naudotą (212)

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Geometrically Overhauled with Inspection Protocol for Tolerances According to New Machine Standards Technical Data: >> Machine No. 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock Morse Taper 3 Djdpewrm Dtofx Admjwf >> Feeds from 0.015 to 0.46 mm/rev >> Threading Capabilities: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle Brake Switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zero, direction of count switching >> New collet chuck setup, new collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 steel tool holders >> Bed stop >> Electric chuck guard NEW >> Rear splash guard >> Operating manual >> Coolant system >> Machine mounts About the machine: Offered is a Weiler Condor 81 lead and feed screw lathe in very good geometrically overhauled condition. The guideways have been newly ground and hand-scraped. Inspection carried out according to the test protocol. Accessories such as collets and chucks are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops—an absolutely like-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Sąlyga: geras (naudotas), Used lead and feed screw lathe COLCHESTER MASTER 3250 Centre height: 170 mm Dedpfsuqkf Njx Admjwf Distance between centres: 650 mm Spindle bore: 42 mm Infinitely variable speed from 15 to 3250 rpm 1 x SCHUNK wedge bar power chuck Ø160 mm 1 x MULTIFIX tool post size B with 4 holders Machine lamp, chuck guard electrically secured, machine mounts 1 x revolving live centre 1 x revolving live centre with pressure indicator 1 x drill chuck with morse taper The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno skylė: 50 mm, centro aukštis: 170 mm, bendras ilgis: 1 650 mm, bendras plotis: 1 060 mm, bendras aukštis: 1 635 mm, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 40 aps./min, sukimosi greitis (maks.): 3 000 aps./min, sukimosi greitis (min.): 40 aps./min, bendras svoris: 755 kg, trijų žandikaulių griebtuvo skersmuo: 200 mm, Įranga: sūkių greitis be galo kintamas, New machine immediately available from our Stuttgart warehouse. (Subject to prior sale.) Dwedpfxedq Rb Ao Admef Whether for prototyping, maintenance, or—crucially—vocational training, EMCO’s conventional and cycle-controlled machines bridge the gap, offering utmost precision in a compact footprint and flexibility down to the smallest detail. From optional accessories to managing installation logistics, we are here to provide expert consultation. Highlights of the EMCOMAT 17D: - Main spindle DIN 55029 - Tailstock (adjustable off-center) - Single-tool holder (clamping claw) - Belt drive for feed gearbox - Chuck guard with electrical safety switch - Optional equipment such as coolant system, sliding chip guard doors, etc. Working area: - Travel in X/Y/Z: 220 / – / 710 mm - Distance between centers: 700 mm - Center height: 170 mm Main spindle: - Max. speed: 3,000 rpm - Spindle mount: Size 5 (DIN 55029) - Max. drive power: 5.3 kW Tailstock: - Internal taper: MT3 - Quill stroke: 120 mm - Quill internal taper: 50 mm The machine can be inspected in Stuttgart.

Sąlyga: naudotas, Gamybos metai: 1985, Weiler Praktikant 140 lathe, year of manufacture 1985, three-jaw chuck, Multifix toolpost. The Z-axis guideway shows slight wear in the front section. The machine is in good, ready-to-use condition. Can be demonstrated under power by arrangement. Dwedpjv N Awfsfx Admsf

Sąlyga: geras (naudotas), Lead and feed screw lathe "Nardini MS 125 E" - Centre height over bed: 150 mm - Swing diameter over cross slide: 140 mm - Centre distance: 500 mm - Spindle speeds: 50–2500 rpm - Spindle bore: 34 mm Dwjdpfx Adew Al Uljmef - Automatic longitudinal and cross feeds - Thread cutting / Metric / Imperial - Tailstock: Morse taper 3 - Multifix quick-change toolpost with holders - Quick-clamping collet system Type 173 E / incl. 16 collets - Change gears - Tool cabinet incl. various accessories - Machine feet - Chip guard (rear) - Drill chuck / Live centre - Work lamp - Documentation Dimensions: LxWxH: 1.6 x 0.7 x 1.6 metres / Weight: 1,250 kg Errors and omissions excepted

Sąlyga: naudotas, Gamybos metai: 1990, sukimosi skersmuo virš skersinio stumduko: 210 mm, veleno skylė: 31 mm, tekėjimo skersmuo: 320 mm, centro aukštis: 165 mm, The machine can be tested under power and is fully functional. Includes accessories. Collet equipment is included. Dwjdpfswpkd Sex Admef

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Specifications: >> Year of manufacture: 1986 >> Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: 8 steps, from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and Equipment: Djdpfowthbisx Admswf >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> Collet chuck system, collets as-new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe with toolmaker precision, in very good condition. The machine is fully operational. The Weiler has been completely disassembled and newly repainted in light grey. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. This newer generation of Weiler lathes is extremely user-friendly and allows production of ground-like surface finishes. You are welcome to inspect the machine under power on site and convince yourself of its condition.

Sąlyga: naujas, Praktikant VC plus The new standard in conventional precision lathes. High-quality, energy-efficient, precise, and universally applicable for production, training, and further education. This machine impresses with: future-oriented technology maximum accuracy durability user-friendly ergonomics minimal footprint and a wide range of accessories. The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical data: WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Distance between centres: 650 mm SPINDLE Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 43 mm Front bearing spindle diameter: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: infinitely variable FEED RANGE Number: infinitely variable Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev Dwsdpfx Adjhw N Ntsmef THREADING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill stroke: 85 mm Morse taper DIN 228: MT 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large, clear 15" touchscreen, pivoting and swiveling, resolution 1366 x 768 - Change operating masks via swipe gestures - Operating functions accessible via app manager - Control panels can be freely configured, positioned, and scaled - Drawings/sketches can be imported from PDF files via USB interface and individually zoomed - Video-assisted machine maintenance - Context-sensitive help menu (instead of WEILER VC plus screen display) - Coolant unit, 18 litres, incl. coolant pump The machine is located in our showroom at 71334 Waiblingen-Beinstein and is available immediately. For detailed information about equipment and configuration, please contact us.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 40 mm, centro aukštis: 160 mm, tekėjimo ilgis: 650 mm, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 20 aps./min, sukimosi greitis (maks.): 3 000 aps./min, sukimosi greitis (min.): 20 aps./min, bendras svoris: 800 kg, veleno tvirtinimas: MK 3, Įranga: sūkių greitis be galo kintamas, Availability: on request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20–3000 rpm, stepless Tailstock taper: MK3 Quill stroke: 85 mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Possible thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: selectable Dwodpfx Ajvnrzqedmjf Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck and further accessories available on request...

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 40 mm, centro aukštis: 165 mm, plotis centre: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its very user-friendly operation and an excellent ratio of space requirement to centre height/centre distance. The Condor B falls in size between the Weiler Praktikant and the Weiler Commodor, making it a true all-rounder for any workshop. The machine is being partially overhauled in our workshop, ensuring it is in excellent technical and visual condition. All guides are in good order, the gearboxes run quietly, and the levers switch smoothly. You are welcome to inspect the machine on site and judge its condition for yourself. Availability: on request Centre height: 165 mm Centre distance: 750 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Djdsw N Np Sepfx Admswf Chuck mounting: Short taper DIN55027 size 5 with bayonet lock Quill stroke: 85 mm Speed range: 22–2800 rpm Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.18 – 28 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.80 x 1.30 x 0.9 m (L x H x W) Weight: approx. 1100 kg Additional equipment and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, lead & feed screw cover (optional), operating manual, and much more available on request. Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired colour - On request, you can order further accessories such as tools directly - On request, we can install additional accessories such as safety devices - We are happy to arrange transport and/or installation for you

Sąlyga: geras (naudotas), WEILER COMMODOR L&Z tekinimo staklė - Tekinimo skersmuo 180 mm - Tekinimo ilgis 1000 mm - Strypo pratekėjimas 56 mm Dwodpfx Asw Nnvwjdmof - Apsisukimų diapazonas 25-2000 aps./min - Sriegiai: metriniai / coliniai ir kt. - Automatiniai išilginiai / skersiniai pastūmos - Grąžtų stovas MK 4 - Trys žandikaulių griebtuvai 250 mm - Elektrinė griebtuvo apsauga - Multifix su įdėklu - Aušinimo skysčio sistema - Drožlių apsauginė siena - Staklių dokumentacija - Geras darbinis stovis Matmenys: Ilgis x plotis x aukštis – 2,5 x 1,3 x 1,7 m / Svoris 1.500 kg Galimi netikslumai ar klaidos

Sąlyga: labai geros būklės (naudotas), Leadscrew and feed shaft lathe Spindle bore: 76 mm Center height: 220 mm Turning length: 3,00 m Multifix tool post with 5 cassettes Coolant system Dedpfxeva Ef To Admjwf Operating manual

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis Digital Readout K&C NEW. Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 87 160 760 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose, DIN 55027 Size 5 with Bayonet Lock >> Tailstock Taper: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: Approx. 680 kg >> Spindle Brake, Switchable >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories & Equipment: >> 3-axis Digital Readout by K&C, new, 12 months manufacturer warranty, with instruction manual Functions: mm/inch switching, ABS/INC coordinate mode, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching Dwodpfxevrdlce Admjf >> New collet chuck system; NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating instructions, spare parts list (PDF) About the Machine: This listing is for a Weiler Praktikant 160 B engine and feed shaft lathe, refurbished to toolmaker accuracy and fully geometrically overhauled. Supplied with inspection protocol for new machine tolerances. For safety: electronic working spindle guard, lead and feed shaft covers, two emergency stops, and a braked motor. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site to satisfy yourself of its condition.

Sąlyga: geras (naudotas), Tovaglieri parallel lathe Used, from an educational environment. Excellent condition. Centre height: 180 mm. Distance between centres: 700 mm. Spindle bore: 45 mm. Included accessories. Dwodpfokt U E Iox Admjf No. 4 units available, subject to prior sale.

Sąlyga: naujas, Lead and Feed Screw Lathe Bernardo Standard 165 D Technical Specifications Centre Distance: 1000 mm Djdpjd Ri Ezofx Admjwf Centre Height: 175 mm Swing Over Bed: 350 mm Swing Over Gap*: 450 mm Swing Over Cross Slide: 190 mm Bed Width: 180 mm Spindle Bore: 40 mm Spindle Mount: DIN 55029, D1-4 Speed Range: (8) 70 - 2000 rpm Longitudinal Feed Range: (40) 0.053 - 1.29 mm/rev Cross Feed Range: (40) 0.013 - 0.31 mm/rev Metric Threads: (32) 0.4 - 7 mm Inch Threads: (36) 4 - 60 TPI Tailstock Quill Travel: 110 mm Tailstock Taper: MT 3 Motor Output (S1 100%): 1.5 kW (400 V) Motor Power Input (S6 40%): 2.2 kW (400 V) Machine Dimensions (W x D x H): 1730 x 700 x 1340 mm Weight approx.: 514 kg * Removable bed section Scope of Delivery • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-160 mm / D4 • Face plate 200 mm / D4, as per DIN 55029 • Fixed steady rest – max. passage diameter 60 mm • Follow rest – max. passage diameter 60 mm • Clamping plate 250 mm • 4-way tool post • Shaft locking device • Tool post safety guard • Slip clutch • Micrometer longitudinal stop • Coolant system • Removable chip tray • Motor with magnetic brake to CE standards • Foot pedal with brake function to CE standards • Splash guard • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Base frame • Operating tools

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 190 mm, veleno skylė: 32 mm, tekėjimo skersmuo: 320 mm, centro aukštis: 160 mm, tekėjimo ilgis: 650 mm, trijų žandikaulių griebtuvo skersmuo: 160 mm, For sale here is a lathe from Voest Alpine in good condition! See pictures Manufacturer: Voest Alpine Model: DA-160 Centre height: approx. 160 mm Distance between centres: approx. 650 mm Swing over bed: approx. 320 mm Swing over cross slide: approx. 190 mm Spindle bore: approx. 32 mm Three-jaw chuck diameter: approx. 160 mm Tailstock taper: MK3 Includes accessories: Four-jaw chuck Ø 160 mm, 6 tool holders, 4 pairs of turning jaws Overall dimensions (LxWxH): approx. 150x90x180 cm The machine can be inspected and tested at our premises by appointment. Loading options: with forklift or crane Shipping costs on request (depending on postal code) You will receive an invoice including VAT. Dedswq Ehbepfx Admewf Inspection and collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loaded. Subject to technical changes and prior sale.

Sąlyga: labai geros būklės (naudotas), WEILER CONDOR tobulas originalios būklės -Mašina iš mokymo įstaigos -Vadovai kaip "NAUJI" -Trijų ašių skaitmeninis indikatorius „Naujas“ -Trijų žandų griebtuvas 200 mm „Naujas“ -Tvirtinimo žiedų įranga, įskaitant rinkinį „NAUJAS“ -Multifix su įdėklais „Naujas“ -Elektrinė griebtuvo apsauga -Keturių žandų griebtuvas -Besisukantis centras + gręžimo griebtuvas -Dokumentacija -Originali danga -Sūkių diametras 330 mm -Sūkių diametras virš atramos 170 mm -Sūkių ilgis 800 mm -Veleno skylė 38 mm -Veleno sūkių dažnis 24-2800 aps./min. -Automatiniai išilginiai / plokštuminiai pastūmos -Galvutės kūgis MK3 -Darbo lempa -Skubus / avarinis stabdis Matmenys: Dedpfjw Iv U Ssx Admewf Ilgis x plotis x aukštis 1,9x0,9x1,6 m / svoris 850 kg Galimi netikslumai / klaidos dėl duomenų įvedimo

Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 360 mm, veleno greitis (maks.): 2 300 aps./min, galia: 4 kW (5,44 AG), DR 180 S x 750 mm Lathe Conventional precision lathe with stepless control Centre height: 180 mm Distance between centres: 750 mm Bed width: 250 mm Swing diameter over bed: 380 mm Swing diameter over cross slide: 245 mm Swing diameter in bed gap: 500 mm Main spindle bore: 40 mm Main spindle mount: CAMLOCK D1-5 Spindle speed range: 0–2300 rpm Number of gear stages: 3 Main motor power: 4 kW Included: Dwsdpfx Adetzkfkomef - 24 V LED machine lamp - FAGOR 40i TS 3-axis digital readout with constant cutting speed function - “Multifix” quick-change tool post with 5 holders - 3-jaw chuck - AIRLOC Schrepfer machine feet Machine available from stock immediately!

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg - Spindle brake engageable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself. Dedsvambcjpfx Admjwf

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2019, veikimo valandos: 720 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D4D194801, sukimosi skersmuo virš skersinio stumduko: 190 mm, veleno skylė: 50 mm, tekinimo skersmuo virš slankiojančio stalo: 340 mm, centro aukštis: 170 mm, veleno greitis (maks.): 3 000 aps./min, The machine has been used for training purposes and has only approx. 720 spindle hours. TECHNICAL DETAILS Distance between centers: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Longitudinal carriage travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: infinitely variable Number of speed ranges: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Center height above floor level: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS 3-jaw chuck Ø200 - 5 x quick-change tool holders B25/120 - Tool set - Fixed center MK 5 Dwsdpfev Iqm Sox Admjf - Turning tool set with parting tool (3 x standard, 1 x parting)

Sąlyga: naujas, Bernardo Lead and Feed Screw Lathe Master 180 including 3-axis digital readout Centre Distance: 1000 mm Centre Height: 180 mm Swing Over Bed: 360 mm Swing Over Gap*: 480 mm Swing Over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 51 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range: (8) 70 – 2000 rpm Longitudinal Feed Range: (32) 0.052 – 1.392 mm/rev Cross Feed Range: (32) 0.014 – 0.380 mm/rev Metric Threads: (26) 0.4 – 7.0 mm Inch Threads: (34) 4 – 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 110 mm Tailstock Taper: MT 4 Motor Output S1 100%: 1.5 kW (400 V) Motor Input S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1920 x 750 x 1600 mm Approximate Weight: 540 kg * Removable gap length: 225 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. passage diameter 70 mm Dedpfx Adsd Du Tijmowf • Travelling steady rest – max. passage diameter 50 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 320 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch • Micrometric longitudinal stop • Thread chasing dial • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with electromagnetic brake (CE standard) • Machine stand

Sąlyga: naujas, Lead and feed screw lathes WEILER COMMODOR 180 GSD - New machine / showroom machine / unused - 3-axis digital readout - CE marking - Centre height: 180 mm - Centre distance: 1000 mm Dsdpjwucv Rjfx Admowf - Bar capacity: 56 mm - Swing over bed: 380 mm - Swing over cross slide: 215 mm - Speed range: 25 - 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric / inch / diametral - Tailstock taper: MT4 - Tailstock quill stroke: 150 mm - Coolant system - Multifix quick-change toolpost with insert - 3-jaw chuck, 200 mm - Work light - Chip guard/rear splash guard - Documentation Dimensions: LxWxH: 2.4 x 1.4 x 1.7 meters / Weight: 1700 kg Errors and omissions excepted.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout by K&C, As New from Training Workshop – Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 / Machine No.: D3F H1 010 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, infinitely variable from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock taper: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required floor space (approx.): Length 1.6 x Depth 0.9 x Height 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: Dwodpfx Aowvuf Tedmjf >> K&C 3-axis digital readout, new, 12 months manufacturer’s warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter, quick zeroing, counting direction switching, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> Multifix B tool post with 2 holders >> Chip guard >> Coolant system About the Machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is, of course, fully functional. The bed ways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new 3-jaw chuck. You are welcome to inspect the machine under power on-site and see the condition for yourself.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, veikimo valandos: 470 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D4D210301, sukimosi skersmuo virš skersinio stumduko: 190 mm, veleno skylė: 50 mm, tekinimo skersmuo virš slankiojančio stalo: 340 mm, centro aukštis: 170 mm, veleno greitis (maks.): 3 000 aps./min, The machine was used for training purposes and has only approx. 460 spindle hours. TECHNICAL DETAILS Distance between centers: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Travel of longitudinal slide: 600 mm Travel of cross slide: 220 mm Travel of top slide: 110 mm Turning tool section: 20 x 20 mm Main drive motor power: 5.3 kW Main Spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: stepless Number of speed ranges: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed Range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread Cutting Range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible Workpiece Weights Dwsdpfx Ajv Iqlzjdmef Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Spindle height above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS Ø200 3-jaw chuck (soft jaws, stepped inside and outside) - 5 x quick-change tool holders B25/120 - Tool kit - Fixed centre MK 5 - Turning tool set (3 x standard, 1 x parting-off)

Sąlyga: naujas, Bernardo Universal Lathe Master 360 Pro Centre Distance: 1000 mm Centre Height: 180 mm Swing over Bed: 360 mm Swing over Gap*: 502 mm Swing over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range (8): 70 - 2000 rpm Longitudinal Feed Range (32): 0.052 - 1.392 mm/rev Cross Feed Range (32): 0.014 - 0.380 mm/rev Metric Threads (26): 0.4 - 7.0 mm Imperial Threads (34): 4 - 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Stroke: 100 mm Tailstock Taper: MT 3 Djdpfxsd I H Izo Admjwf Rated Motor Power S1 100%: 1.5 kW (400 V) Motor Power Consumption S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1825 x 750 x 1600 mm Weight approx.: 576 kg *Removable Gap Bed Length: 205 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. workpiece diameter 70 mm • Travelling steady rest – max. workpiece diameter 60 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 280 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with electromagnetic brake (CE compliant) • Base with drawers • Operating tools