Lazerinio pjaustymo staklės

175.000,-€ /3kW/Tischbeladung/15-230mm 6020ETN-NEW/ 6m / 4m

Sąlyga: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, darbinio aukščio: 2 000 mm,

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Isdpfx Afjfg E Hpj Ietb Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: naujas,

Sąlyga: naujas, Gamybos metai: 2025, Lazerio šaltinis: Raycus arba Max: 4/6/8/12 kW Lazerio galvutė: 3 D BOCI Valdymo sistema: FSCUT 5000 A Griebtuvas: 20–450 mm Pakrovimas/iškrovimas: 12000 mm X-/Y-ašys Pozicionavimo tikslumas: ±0,05/1000 mm Kartotinumo tikslumas: ±0,03/1000 mm Pagreitis: 0,8g (m/s²) Sukimosi greitis: 60 aps./min Didžiausias pozicionavimo greitis: 60 m/min Didžiausias vamzdžio svoris: 1500 kg 1. Raycus 6000W lazerio šaltinis 2. Vamzdžių pjovimui pritaikyta nuožulni lazerio galvutė 3. Suvirinta rėmo konstrukcija DPL 4. Schneider elektros komponentai 5. Sraigtinis KH kreiptuvas 6. Techmech reduktorius 7. Yaskawa servovariklis Isdpfsi Apfzox Af Ietb 8. SHAC kreiptakiai 9. Integruota galios valdymo sistema 10. FScut 5000 programinė įranga 11. Integruotas elektrinis skydas 12. HANLI vandens aušintuvas 13. Konvejerinis portalo tipo X-ašies modulis FHBS 14. Automatinis atliekų surinkimas 15. Grandininio tipo automatinė ruošinių surinkimo sistema 16. Automatinė atramos sistema 17. Pakrovimo rėmas 12000 mm 18. Iškrovimo rėmas 12000 mm

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox Isdped Ab H Hjfx Af Ietb • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, bendras svoris: 35 000 kg, spaudimo jėga: 250 t, įvesties srovės tipas: trifazis, galia: 30 kW (40,79 AG), perforavimo jėga: 250 t, įėjimo įtampa: 200 V, Įranga: apsaugos šviesos užtvara, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160 t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Die Height (adjustable): 280–400 mm Table Dimensions: 2700 x 760 mm Ijdpfxsu Dxb Te Af Ijtb Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30 kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 100810261, aušinimo tipas: vanduo, SHINOHARA 75 VP PERFECTING PRESS (1+4 COLOURS) CIP3. AUTOMATIC BLANKET WASHER, AUTOMATIC WASHING SYSTEM. UV LAMPS. WATER CHILLER WITH AUTOMATIC ALCOHOL MIXING AND PH CONTROL. AUTOMATIC METERING DEVICES. INCLUDED WITH THE MACHINE: WASHING ROLL WINDER. PAPER PALLET LIFTER. 2 CALIBRATION DEVICES. 20 SPARE ROLLERS. Itodpstvmq Njfx Af Iob PRINT COUNT: 4,600,000.

Gamybos metai: 2021, Sąlyga: naujas, Ein-Kopf-Schneidemaschine OMC RONDA 700, neu Maschine auf Lager Iodpfshrukiex Af Ijtb - Sägeblatt-Durchmesser 700 mm - hydro-pneumatischer Vorschub - Neigungsverstellung pneumatisch beidseitig, mit festen Rastungen bei 22,5° - 45° - 90°. Für Zwischenwinkel mit manueller mechanischer Arretierung - 2 vertikale und 2 horizontale Spannzylinder - Sprühnebelschmierung für das Sägeblatt - komplette pneumatische Schutzabdeckung

Sąlyga: naujas, Gamybos metai: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with Coolant System B (Option 25) (comprising separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom-head emergency stop, reversing switch (for clockwise and counterclockwise operation), motor protection switch Stepless speed adjustment, digital speed display, Ijded Hy Eljpfx Af Ijtb Feed overload protection, protection class IP54, connection plug Spindle guard with electrical interlock Technical data: Drilling capacity steel E335 (St 60): 40 mm Tapping: Steel E335 (St 60): M24 Cast Iron EN-GJL-200 (GG20): M30 Short spindle: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable surface: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Distance spindle-table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, veikimo valandos: 22 351 h, valdymo tipas: CNC valdymas, automatizacijos lygis: pusiau automatinis, lazdo šaltinio gamintojas: Trumpf, lazero valandos: 17 317 h, lazerio galia: 4 000 W, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, nerūdijančio plieno lakšto storis (maks.): 15 mm, aliuminio lakšto storis (maks.): 10 mm, darbinis ilgis: 3 000 mm, darbinis plotis: 1 500 mm, Z ašies eigos atstumas: 115 mm, kartojimo tikslumas: 0,03 mm, aušinimo tipas: vanduo, bendras svoris: 12 000 kg, Įranga: CE žymėjimas, apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, dokumentacija / vadovas, dulkių šalinimas, Parduodama: TRUMPF TruLaser 3030 su LoadMaster automatizacija Įrenginys sumontuotas 2021 m. birželį. Itedewya Twjpfx Af Ieb Aptarnautas tik TRUMPF Slovakia, profesionali priežiūra atliekama kas pusę metų. Įrenginys puikios būklės, su LoadMaster automatizacija. Lakštų pjovimas iki 25 mm storio. Rezonatoriaus tipas ir galia: CO₂, 4 kW. Maksimalus darbinis plotas: 3000 × 1500 mm. Įranga veiks iki 2025 m. gruodžio pabaigos, galima apžiūrėti bet kada visiškai veikiančią. Pateikiama pilna serviso istorijos dokumentacija.