Valymo mašina

- Italy Basic 300

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, Wide-belt sander DMC USK 1350 M3 – Made in Italy – Cross-belt unit (so-called 'sergeant') Caodpogr Er Sefx Admoa – Year of manufacture: 2011 – Electric and pneumatic ionizer TECHNICAL SPECIFICATIONS: Sanding width: 1350 mm Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st unit: Cross-belt (so-called 'sergeant') Motor power: 12 kW 2nd unit: Rubber roller Hardness: 95 Shore Diameter: 240 mm Motor power: 18.5 kW 3rd unit: Rubber roller Hardness: 55 Shore Roller diameter: 300 mm Motor power: 15 kW 4th unit: Pneumatic pad Motor power: 15 kW 5th unit – Cleaning brush – 2.2 kW 6th unit – Air blower Blower for the belt Pneumatic oscillation Feed speed: 2.5 – 18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Gamybos metai: 2024, Sąlyga: naujas, The world’s flattest timber frame assembly table = 3 cm! Delivered without timber boards. Text line break with the following specifications: Included components: - 1 double rail (zero stop) - 10 perforated rails - 10 rack-and-pinion clamps - 14 adjustable end stops - 14 interchangeable outside wall pressure plates - cordless impact driver - bit adapter - 50 dowels MMS 10x70/5 - hammer drill bit 8x165 Dimensions: Clamping length: 0 to 3,550 mm Hole grid: 140 mm With a board width of 1,250 mm = table length 12,350 mm Cedpfx Adsb Nrbnemeaa Max. clamping force approx. 250 kg Clamp stroke: 340 mm End stop height: 100/160 mm This assembly aid was developed to enable precise production of timber frame construction elements. Special attention was paid to space requirements and price. Thanks to the extremely flat design, the area can be repurposed for other uses simply by removing the clamps and stops. This is a significant advantage not just for small companies, but also for operations of all sizes. After creating a level surface, the clamping rails are aligned and anchored to the floor. The gaps are filled with a 30 mm thick timber board to be provided and installed by the customer. At the edges, approach ramps can be attached using the same boards. The resulting surface can be driven on by heavy vehicles or used as storage space. This means the area needed for timber framing is only activated when required. All steel parts are galvanised. Full assembly is carried out by the customer. After adjustment, the end stops must be pinned, otherwise they may be shifted by the force of the clamps. Packed in wooden crates, ready for EU shipping. Delivery free to your door within Germany. Made in Germany. For further technical data, please refer to the brochure.

Sąlyga: naujas, Gamybos metai: 2024, Darbinis plotis: 380 mm Darbinis aukštis: 150 mm 1 agregatas, rotorių grupė: 5 osciliuojančių rotacinių šepečių grupė, Ø 115 mm, kiekviena su 3 kW varikliu 2 agregatas, šepetys: Scotch Brite Hard / skersmuo 210 mm, kintamo greičio pavara Aukščio reguliavimas: rankinis ratukas Aukščio rodmuo: mechaninis skaitiklis Padavimo greitis: 4 - 12 m/min Padavimo motoro galia: 0,37 kW Vakuuminis kilimas: taip Csdetnf Rropfx Admoaa Staklių ilgis: 1400 mm Staklių plotis: 900 mm Svoris: 500 kg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 2 000 mm, bendras plotis: 1 250 mm, bendras aukštis: 2 000 mm, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, galia: 40 kW (54,38 AG), pjūklo disko skersmuo: 450 mm, ruošinio plotis (maks.): 300 mm, ruošinio aukštis (maks.): 30 mm, oro slėgis: 6 juosta, ištraukimo jungties skersmuo: 200 mm, honavimo skersmuo: 125 mm, ašies skaičius: 2, MARINUS PROMAX - Endenbearbeitungsmaschine und Fehlstellensäge. Die Maschine entspricht folgenden Spezifikationen: • Stabile und schwere Bauweise, Abmessungen LxBxH = 2080x1260x2000 mm. Casdpoq Auhdjfx Admea • Kontinuierliches Zuführsystem mit präziser Positionierung (Servoantrieb). • Pneumatische Seitenanschläge für garantiert rechtwinklige Ausrichtung. • SPS-Steuerung. • Bedienung über Terminal. • Modem zur Fernprogrammierung. • 2 Servomotoren für maximale Dynamik. • 2 Sägemotoren (3,0 kW). • 2 Hochgeschwindigkeits-Fräsmotoren mit Frequenzumrichter (je 7,5 kW / 200 Hz / n = 12.000). • 1 Getriebemotor mit Frequenzumrichter. • 2 Trommelmotoren. • 26 Pneumatikzylinder mit Ventilen. • 1 Lumineszenzsensor. • 6 Induktivsensoren. • Abfallbandförderer, Förderhöhe 1,3 m. • Maschine komplett durch Sicherheitstüren gekapselt. • Maschine entspricht CE-Vorschriften. Längenmesssystem: Ein Längenmesssystem zeigt während der Produktion die Gesamtlänge und die Quadratmeter der Bretter am Display an. Werkzeugausstattung: Wir bieten optional Werkzeuge (Nut- und Feder-Profilierung) mit Wendemessern und 2 Kappsägeblättern für die Maschine an. Standard-Programmierung: Die Maschine ist mit 2 Hauptprogrammen ausgestattet: 1. Endenbearbeitung 2. Zuschnitt Beide Hauptprogramme verfügen über 2 Unterprogramme: 1. Variable Längen: Fehlstellen werden ausgeschnitten, Endprodukte haben variable Längen. 2. Fixlängen: Die Bretter werden auf eine feste Länge produziert, die Eingabelänge kann bis zu max. +200 mm übermaß betragen. Das Ausschneiden von Fehlstellen ist hierbei nicht möglich. • Min. Breite 60 mm • Max. Breite 300 mm • Min. Länge 500 mm • Max. Länge 6000 mm • Min. Stärke 10 mm • Max. Stärke 30 mm

Sąlyga: naudotas, Gamybos metai: 1999, mašinos/transporto priemonės numeris: 99T318, PERTICI UNIVER 330IP DOUBLE MITRE SAW – CE STANDARDS – USED Csdpfx Asqmpnaodmjaa - Cutting length: 3300 mm - Power: 4.5 kW - Blade diameter: 330 mm - Double mitre with blade dust extraction - Voltage: 380V / 50Hz - Serial no.: 99T318 - Year: 1999

Sąlyga: naujas, Tipas: 1000-2S Darbinis plotis: 1000 mm Minimali darbinio ruošinio ilgis: 400 mm Darbinis storis: 2–80 mm Csdpfx Aem Dr Rnedmeaa Šlifavimo volo greitis – dažnio valdymas Padavimo greitis: 5–20 m/min Bendra variklių galia: 4,12 kW Transportavimo matmenys: 1700 × 1600 × 1400 mm Svoris: 800 kg Kaina: 4130 Eur (EXW Jonava, Lietuva)

Sąlyga: naujas, Gamybos metai: 2023, Working width: 600 mm Working height: 280 mm Minimum workpiece length: 250 mm Units: 2 brush assemblies, centrally adjustable and each with individual fine adjustment Diagonal brush technology: Yes, steplessly adjustable from -7° to +7° 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Codpemftk Aofx Admoaa Height adjustment: electric Height display: mechanical counter (mechanical tally counter) Feed speed: 4 - 12 m/min Brush motor power: 2 x 4 kW Feed motor power: 0.37 kW Machine length: 1.5 m Machine width: 1.5 m Weight: 700 kg

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Casdpfou Atmuex Admsa Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Cjdpfx Asi Hpk Uodmjaa Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Sąlyga: labai geros būklės (naudotas), ROLLER COATING MACHINE (REVERSE) Max. working width: 1300 mm Total machine length approx.: 1600 mm Integrated control cabinet with operator panel Driven conveyor carpet for workpiece feed (with servo controller, rated power 0.75 kW) Feed speed: 6 m/min to 24 m/min Total connected load approx.: 4.1 kW Equipped with 2 working units: * 1st unit (with 2 rollers): Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, both with individual speed controllers (power 0.37 kW + 0.75 kW), including rubber-coated counter roller underneath Casdpfsidqwpex Admja * 2nd unit (with 2 rollers): Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, both with individual speed controllers (power 0.37 kW + 0.75 kW), including rubber-coated counter roller underneath