Tekinimo staklės-įprastos-elektroninės

ZMM C10T

Sąlyga: naujas, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €107,870 Leasing rate: €2,038.74 Swing over bed: 800 mm Centre distance: 2,000 mm Centre height: 400 mm Spindle bore: 260 mm Swing over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed range: 8 - 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/5 TPI Module thread range: 0.125 - 37.5 Dksdpfx Aewirghef Hou DP thread range: 240 - 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Weight: 6,000 kg The primary application of this type of lathe is pipe machining. Accordingly, this machine model is widely used in the petroleum industry. Pipe thread lathes are highly capable of machining threaded connections on cylindrical and conical internal and external surfaces of pipes with large diameters. Clamping pipes with two chucks and the supplied steady rests enables machining of pipes with significant lengths. Suitable for both production of components and equipment for the oil and transmission industries as well as for the maintenance of such systems. Drive via gear transmission Electrodynamic brake 3-axis digital readout Fagor Quick-change tool post Amestra type C, similar to Multifix system incl. 4 holders (3x rectangle, 1 round) 2 pcs. 3-jaw chuck Bison 3295, dia. 500 mm, on both spindle sides, clamping range 120 - 350 mm (option: special hard outside jaws, clamping range 120 - 500 mm) 2 pcs. steady rests on stands, dia. 60 - 260 mm with rollers Rapid traverse (4) Longitudinal stop for one position Taper turning attachment Coolant system Rear chip splash guard over full length Lead screw and feed shaft cover Chuck guard Tool holder guard Levelling bolts and plates Tailstock Reducing sleeve for tailstock quill Mechanical movement of tailstock via handwheel Low-voltage machine lamp Operating manual Equipment in accordance with "CE" Further models available on request with spindle bore from 5 to 358 mm, centre distances from 1,000 to 6,000 mm, and swing over bed from 730 to 1,020 mm.

Sąlyga: naujas, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €107,970 Leasing rate: €2,040.63 Swing diameter over bed: 800 mm Distance between centers: 2000 mm Center height: 400 mm Spindle bore: 3 mm Swing diameter over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed range: 8 - 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/5 TPI Module thread range: 0.125 - 37.5 DP thread range: 240 - 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Weight: 6100 kg The primary application of this type of lathe is pipe machining. Accordingly, this type of machine is widely used in the oil industry. Pipe-threading lathes possess significant capabilities for machining threaded joints on cylindrical and conical internal and external surfaces of large-diameter pipes. Clamping of pipes with two chucks and the provided pipe rests enable machining of pipes with considerable length. Suitable both for the manufacture of components and equipment for the oil and transmission industry as well as for the maintenance of such installations. - Drive via gear transmission - Electrodynamic brake - 3-axis digital display Fagor - Quick-change tool post Amestra type C, Multifix-compatible system including 4 holders (3 rectangular, 1 round) Dkodpfewiq E Aox Af Hsu - 2 pcs. 3-jaw chucks Bison 3295, Ø 500 mm, mounted on both sides of the spindle - 2 pcs. steady rests on stands for Ø 120 - 320 mm with rollers - Rapid traverse (4) - Longitudinal stop for single position - Taper turning attachment - Coolant system - Rear chip protection wall across the full length - Lead screw and feed shaft cover - Chuck guard - Tool holder guard - Levelling bolts and plates - Tailstock - Reducing sleeve for tailstock quill - Mechanical tailstock movement with handwheel - Low-voltage machine light - Operator’s manual - Equipment according to "CE" standards Other models with spindle bores from 5 to 358 mm, center distances from 1000 to 6000 mm, and swing diameters from 730 to 1020 mm available on request.

Sąlyga: naujas, Condition: new Delivery time: approx. 4 months from order placement Country of origin: Bulgaria Price: €131,720 Leasing rate: €2,489.51 Swing diameter over bed: 1,020 mm Distance between centers: 2,000 mm Center height: 510 mm Spindle bore: 358 mm Swing diameter over cross slide: 770 mm Bed width: 560 mm Spindle taper: 361 M Number of spindle speeds: 12 Spindle speed range: 6.3 – 3,100 rpm Number of feeds: 2 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 7.5 mm/rev Number of threads: 76 Metric thread pitch range: 0.5 – 0 mm Inch thread pitch range: 60 – 1/5 TPI Module thread range: 0.125 – 37.5 DP thread range: 240 – 4/5 Cross slide travel: 505 mm Top slide travel: 270 mm Tailstock quill diameter: 105 mm Tailstock taper: MT 6 Tailstock quill stroke: 225 mm Motor power: 18.5 kW Weight: 6,400 kg The primary purpose of this type of lathe is the machining of pipes. Accordingly, this machine type is widely used in the oil industry. Pipe-threading lathes have great capability for machining threaded connections on cylindrical and conical internal and external surfaces of pipes with large diameters. Clamping of pipes with two chucks and the supplied steady rests enable machining of pipes of great length. Suitable both for manufacturing parts and assemblies for the oil and transmission industries as well as maintenance work on such equipment. Dodpfx Aswiq Drof Hjku Features: - Drive via gear transmission - Electrodynamic brake - 3-axis Fagor digital readout - Amestra Type D1 quick-change tool post, system compatible with Multifix incl. 4 holders (3x rectangular, 1 round) - 2 pcs. 3-jaw chucks Bison 3295, 660 mm diameter on both ends of the spindle (max. 250 rpm), clamping range 5 – 400 mm (option: special hard external jaws, clamping range 80 – 400 mm) - 2 pcs. steady rests on stands, diameter 160 – 360 mm with rollers - Rapid traverse (4) - Longitudinal stop for one position - Taper turning attachment - Coolant system - Rear full-length chip splash guard - Leadscrew and feed shaft cover - Chuck guard - Toolholder guard - Leveling bolts and plates - Tailstock - Reducing sleeve for tailstock quill - Mechanical tailstock movement with handwheel - Low-voltage machine lamp - Operating manual - Equipment according to "CE" standards Further models with spindle bores from 5 to 358 mm, distances between centers from 1,000 to 6,000 mm, as well as swing diameters from 730 to 1,020 mm available on request.