Vieno stulpelio spauda - hidraulinis

ZEULENRODA PYE 10 S S

Būklė: geras (naudotas), Maximum pressing force: 10 tonnes. Operating pressure: 16 MPa Cylinder stroke: 400 mm Bjdpfx Aaeydlvkshswi Downward speed: 100 mm/sec Speed up to 450 mm/sec Power requirement: 5.2 kW Weight: 1.3 tonnes Clamping table modified! Not the original table!

Būklė: naudotas, mašinos/transporto priemonės numeris: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm BRUDERER precision double-roller feeder: left side Adjustable stroke range: 16–40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m Bwedpfx Ascxxycoahoi High-speed punching press in three-column design, air clutch, BRUDERER precision double-roller feeder on left

Būklė: naudotas, Gamybos metai: 1979, Pressure 10 t Outreach 250 mm Stroke 400 mm Bodpfxowbizye Aahjwi Downward speed 100 mm/sec Upward speed 450 mm/sec Max. distance table - ram 630 mm Total power requirement 5.2 kW Machine weight approx. 1.3 t

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Bedpfx Aefxyhfoahjwi Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: naudotas, Gamybos metai: 2004, Technical details: Bwsdpek Hdu Djfx Aahei X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed range: 63 - 3,150 rpm Infinitely variable feed: 12-3000 / 6-1500 (Z) mm/min Quill stroke: 100 mm Swiveling head +/-: 90° Spindle taper ISO: SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with path control, mechanical handwheels, rotatable tilting table +/- 45°, hydraulic tool clamping, semi-enclosure, coolant tank, manual

Gamybos metai: 1972, būklė: naudotas, mašinos/transporto priemonės numeris: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Bodpfjb Tdquex Aahswi Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Gamybos metai: 2012, būklė: geras (naudotas), mašinos/transporto priemonės numeris: ENOG, DEMAG KBK crane runway (crane track), approx. 8x4m Load capacity: 250 KG (0.25 tons) Technical data: - Crane runway made from Demag KBK1 + KBK2 rails The system is delivered complete, including: Bwedpfomqf Nfex Aahei - KBK rails - Rail connectors - Trolleys - End plates - Cable drag chain - Suspension brackets/hangers etc. Including Demag DC-COM 250 KG electric chain hoist The crane is dismantled and available immediately. Used condition, see pictures. Item location: 75053 Gondelsheim Shipping via freight carrier or pickup by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125 KG to 1,600 KG. Please inquire about your desired crane runway with overhang and dimensions.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2003, FLEXIbend RAS 73.30 - Bendimo ilgis: 3200 mm Lakšto storis maks. (400 N/mm²): 3,0 mm Viršutinės sijos eiga maks.: 300 mm Atmušimo sistema (U formos atmušas): 10-1550 mm Pasirinktinai pailginta: (-3050) Staklių matmenys (didžiausia opcija): 4360 x 5220 mm Pagrindinės mašinos svoris: 4400 kg - Su mašina susiję duomenys: Varomas varikliu; 400V, 50/60 Hz, 3 fazės Metai: 2003 Būklė: suremontuota, labai gera naudota būsena Pilnas įrankių komplektas su specifine maks. lakšto storiu Dviejų žmonių naudojimas iš priekio Antras kojinis jungiklis naudojimui iš galo (įskaitant šviesos užtvarą darbui iš galo) 15 colių CNC spalvota grafikos ekrano valdymas Touch&More CNC galinis atmušas su palaikymo sistema (10-1550) Bodpfox Hx Slox Aahowi Atmušimo sistema (standartas): 10-1550 mm - Pavyzdinės nuotraukos -

Būklė: naudotas, Gamybos metai: 2007, Double-spindle machining center in 5-axis configuration (bilateral) Travel paths X/Y/Z = 600 / 600 (975) / 500 mm Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Spindle speed up to: 17,500 rpm Drive power: 38 kW Tool magazine: 2 x 72 tool positions Tool holder: HSK 63 CNC control: Siemens 840D 1 x tool breakage monitoring 2 x clamping bridge supports H75 mm 2 x 5th axis clamping bridges Coolant system: Knoll, 70 bar Bwodpfx Aastgu Ixshoi 1 x chip conveyor KB1000 1 x drilling head indexing 2 x tool contact surface monitoring 2 x retrofit kits for torsion compensation A-/U-axis

Būklė: naujas, Gamybos metai: 2024, ✅ New equipment ✅ Top price ✅ Immediately available ✅ Shipping possible ◾ SCHORR Electric High-Lift Pallet Truck ◾ Model RR12HH with 3500mm lift height ◾ Low-maintenance and easy to operate ◾ Includes 24V batteries and charging station ◾ 1.2t / 1200kg load capacity ◾ Excellent price-performance ratio ◾ IMMEDIATELY AVAILABLE! SCHORR electric stackers offer outstanding value for money. The offset drive unit allows for a tight turning radius with optimal all-round visibility. Every model is equipped with a multifunction tiller displaying battery status and can be started using an ignition key. The tiller is ambidextrous and also features a creep speed mode. The design is robust and service-friendly; exposed areas are protected with impact-absorbing plastics. The emergency stop switch is positioned centrally for quick access at all times. As standard, these pallet trucks are fitted with tandem load rollers that allow for quiet and low-vibration movement over uneven surfaces, such as paving stones. Specifications Manufacturer (abbreviation): SCHORR Manufacturer type designation: RR12HHE Load capacity: 1.2 t Model: 350E Own weight including batteries: 477 kg Bjdpeidqr Ssfx Aahjwi Drive: Electric Tyres: Polyurethane Dimensions Overall length: 1755 mm Overall width: 795 mm Length including fork back: 605 mm Lift height: 3500 mm Mast height, retracted: 2224 mm Mast height, extended: 3924 mm Fork dimensions DIN ISO 2331: 60 mm x 160 mm x 1150 mm Outside fork width: 570 mm Working aisle width (pallet 800x1200 lengthwise): 2068 mm Turning radius: 1366 mm Performance Travel speed with/without load: 4.0 km/h / 4.2 km/h Lifting speed with/without load: 0.09 m/s / 0.14 m/s Lowering speed with/without load: 0.11 m/s / 0.1 m/s Max. gradeability with/without load: 6% / 8% Whether you would like the stacker delivered or prefer to collect it from us in 48465 Schüttorf, we have a suitable solution for you. Feel free to contact us. To make collection and viewing as convenient as possible for you, please note that these are only possible by telephone appointment. Interested in financing or leasing? No problem! We also offer attractive options for this. Just get in touch and we will advise you on the various possibilities. We look forward to your enquiry! If you have any questions about our pallet trucks, the SCHORR team is happy to assist. You can reach us by phone or email. We look forward to hearing from you and providing professional advice.