Smulkintuvas

ZERMA ZXS 1500

Būklė: naudotas, mašinos/transporto priemonės numeris: 13299, Rotor diameter: 750 mm Nsdpfxoyr Twrs Acpocr Rotor width: 1,500 mm Rotor knives: 76 Stator knives: 1 row Infeed opening approx. 1,500 x 1,500 mm Drive motor: 2 x 45 kW

Būklė: naudotas, Eldan Granulator HG129 Nsdpfx Acst Uyvrspjcr

Gamybos metai: 2013, būklė: naudotas, Technical data for the bale opener line for RDF, MSW, paper, cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of manufacture: 2015 Number of bales opened: 674 units Operating time: only 3 days, exclusively during commissioning of the entire plant upon initial installation Opening time: approx. 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400–1900 mm Max. bale weight: 2,000 kg Conveying height (system): 1,400 mm Max. conveyor width (system): 1,200 mm Materials to be opened: RDF/MSW System availability: 98% Noise level of bale opener line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Nodpfju Tg I Dex Acpscr Operator display: SIEMENS SIMATIC HMI Touch Control system: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: - Feeding conveyor: 3,500 x 1,200 x 1,400 mm - Infeed conveyor to opener: 1,500 x 1,200 x 1,400 mm - Bale opener (gripper with knife) Special equipment: - Oil heater in hydraulic oil tank - Control cabinet heating - Oil cooler for hydraulic unit Explanation regarding the short operating period: The complete Cross Wrap bale opener line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The background for installation was that, in the event of operational disruptions or maintenance of the incineration plant, municipal waste could continue to be accepted, compacted, wrapped, and stored until the disruption was resolved. Then, all the bales would be reopened and the waste would be fed back into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and never used in regular operation afterwards. Only during commissioning and initial testing were 674 bales opened over three days in 2015. The system is in excellent, immediately operational condition. Due to modifications at the incineration plant, the installation area for the bale opener was needed, so the entire line is now available for sale. Brief description of the bale opening process: Pressed bales are placed on the infeed conveyor from the side or rear using a forklift. For opening, the bales must be oriented so that the wire or twine binding runs horizontally to the conveyor; otherwise, the bales must be rotated 90° beforehand. The opening conveyor moves one bale at a time in front of the cutting unit. The grippers secure the wires or twine. The rotating knife cuts the bale lengthwise. Afterwards, the gripper returns to the home position. The opened bale is then conveyed to the discharge chute and falls onto the subsequent conveying system. Remarks: Original price of the entire plant: €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. The system has been dismantled into transportable units, stored, and is available at short notice for inspection and loading. No liability is assumed for the technical specifications or possible errors.

Gamybos metai: 2022, būklė: paruoštas naudoti (naudotas), The system includes a Vecoplan shredder, drag chain conveyor, and a lifting and tipping device with protective grid. The system was used for plastic recycling and comprises the following components: 1) Vecoplan VIZ 1300 S shredder, equipped with a hooded feed hopper, base frame, discharge electrode, drag chain conveyor, and lifting-tipping unit. Feed length: 1250mm, feed width: 1300mm. Drive type: electric motor with V-belt drive, rated motor power: 90kW, rated current: 169A, motor speed: 750 rpm, protection class: IP 55. Rotor diameter: 495mm, number of cutting crowns: 87 pieces, cutting crowns size: 40x40mm, rated rotor speed: 185 rpm, rotor speed range: 95-265 rpm, screen hole diameter: 40mm, drive side: right (standard). Overall length: approx. 2850mm, width: 2515mm, height: approx. 1350mm, weight: approx. 7200kg. 2) Drag chain conveyor, trough width: 500mm, section length: 2700mm, auger diameter: 315mm, auger length: 3000mm, conveying speed: 24m/min, drive power: 2.2kW. 3) Lifting-tipping device, with protective grid and safety light curtain. Lifting capacity: approx. 500kg, tipping angle: 150°, tipping height: approx. 3390mm, container length/depth: 857mm, container width at tipping edge: 1060mm, container height: 916.5mm, under-clearance height: approx. 255mm, container weight: approx. 135kg, max. container weight incl. product: 500kg, container volume: 0.5m³, lifting and tipping speed: 6.6m/min, motor power/rated current: 1.5kW/4.95A. Transport chains: 2 pcs, safety chains/chain break protection: yes, chain breaking force per strand: 70,000N. Operating hours: approx. 6400h. Complete documentation is available. Additional spare parts are optionally available. On-site inspection is possible. Nedpfx Acjx Dm A Rjpocr

Būklė: naudotas, Gamybos metai: 2019, veikimo valandos: 16 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: #005, bendras svoris: 46 100 kg, valdymo spintos ilgis: 5 000 mm, valdymo spintos plotis: 2 400 mm, valdymo spintos aukštis: 2 600 mm, galia: 450 kW (611,83 AG), įvesties srovės tipas: Nuolatinė srovė, sukimosi greitis (maks.): 32 aps./min, Įranga: sūkių greitis be galo kintamas, Equipment - Power: 450 kW DC – with ABB frequency converter including DTC control - Bevel helical gearbox – roller speed up to approx. 32 rpm / Variable via belt drive and frequency converter control. - BioPower roller with 42 teeth - Roller length: 3,000 mm, diameter: 800 mm - Stepless speed control - Tooth type: Form C3 trapezoidal tooth, 174 mm - Armored wear plates on the roller for wear protection - Hydraulically adjustable counter comb – cutting gap adjustment via display - 4 comb cylinders - Central lubrication system - Hydraulically opening comb hatch Njdpfsx I A Akjx Acpecr - Pre-installed main control cabinet - On-site control panel at the machine - Start-up warning system - Engine compartment lighting - Painting: RAL 2011 deep orange The machine is equipped with the following additional features: - Limiter mounting bar - Limiter elements - Automatic comb positioning - Automatic comb cleaning system - Machine stand, height 1,200 mm - Three-sided hopper extension (left or right) - Flashing warning light module - Solenoid valve for water spray system - Radio remote control (EU) - Profibus integration - 2 additional power outputs on the control cabinet, up to 7.5 kW - Control cabinet container, air-conditioned, LxWxH 5,000x2,400x2,600 mm Upon request, the machine can undergo comprehensive reconditioning at our factory. - OPTIONAL ONLY: Undercarriage conveyor AA 8,350 x BB 1,200 mm, 5.5 kW, reversible Other: - Display in German, English possible - Stickers and control panel labeling in German, English upon request - Warning labels in German, English upon request - Operating manual in German (paper and digital) (for local translation if required)

Būklė: naujas, ZXS 1500 – 2x75kW – Working section: 1500 x 1490mm ZXS 2000 – 2x90kW – Working section: 1500 x 1900mm Ncsdpeyr Tf Asfx Acper ZXS 3000 – 2x110kW – Working section: 1500 x 2700mm ZXS Series: The single-shaft shredder for demanding shredding tasks. These machines are extremely robustly built and deliver high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard. Wide range of applications for the ZXS series: A variety of materials can be shredded and prepared for recycling with the ZXS series, including used cables, PET bottles, paper and cardboard, etc. Get expert advice on how your material can be shredded and recycled.