Smulkintuvas

ZERMA ZHS

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 13187, Rotor diameter: 400 mm Rotor width: 1100 mm Rotor knives: 54 Stator knife rows: 1 Infeed opening approx. 1100 x 1500 mm Drive motor: 37 kW Bjdpfxewbwvlo Agijcw

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Bodpfx Ajvgrh Ujgiocw Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: naujas, Length 1900 mm Width 810 mm Height 860 mm Internal dimensions (LxWxH) 1.5 x 0.74 x 0.78 m Machine weight approx. 200 kg Space requirement approx. 1.9 x 0.81 x 0.86 m For collecting and disposing of bulk materials and industrial waste - Tipping container – forklift attachments for in-plant storage of bulk materials - Powder-coated in standard colors: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite grey / custom paint available on request - Tipping mechanism with base plates for swivel and fixed castors - Drainage system - Sturdy base frame with fork pockets - Favorable load center - Robust sheet steel construction with reinforced rim Bcjdpfogvqz Iex Agiew Container capacity: approx. 600 l

Sąlyga: naujas, The solution for shredding large, long pipes and profiles. The ZRS series is specifically designed for the size reduction of pipes with diameters up to 1,300 mm made from various materials such as PE, PP, and PVC. These machines are capable of directly shredding plastic pipes up to 9 metres in length without the need for pre-cutting or sawing. At the core are rotors with diameters up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. Bcodpoghgd Iofx Agijw The pipe is inserted into a closed feed trough, where it is pressed against the rotor by a hydraulic pusher. The pre-shredded material is then conveyed by the shredder via a conveyor belt to a granulator. The granulator further processes the material into directly re-usable regrind. The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, avoidance of power peaks, and minimised risk of accidents during pre-shredding.

Sąlyga: naudotas, Feed opening: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor diameter: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Bsdpfx Asbq Stqjgijcw Screen design: heavy-duty screen basket, reinforced with ribs Screen perforation: 15 mm Counter-knives: with adjustable cutting gap Machine weight: approx. 5,900 kg

Sąlyga: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Svoris 4950 kg, bendras svoris 12000 kg Bjdpfx Agowpmckeijcw Galia 5,5 kW

Sąlyga: naujas, Gamybos metai: 2026, Consisting of Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (Production time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – this controls the speed of the drag floor. Bales are placed on the drag floor and the cutter head’s feed is activated. The tines on the cutter head tear the straw from the bale and throw it into the hopper. Ideally, a combination of bale breaker and straw shredder is recommended here. Technical Data – Bale Breaker: Capacity: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill, kW of the straw mill). Without the straw mill, the bale breaker can even dissolve up to max. 900 kg/h of straw. Max. size of square bales: 2400 x 1200 x 800 mm (L x W x H) Cutter head motor: 5.5 kW, 380 Volt Drag floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Extra charge for larger straw shredder (18.5 kW) + €3,940 net Technical Data, MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric Bcodpfx Ageb Nulhjijw Diameter: 600 mm Hardened cutting blades Screen with interchangeable inserts (options: 10, 12, 15, 22, 30, 45 mm hole size) With star-delta switch, overload protection, and 8m supply cable ready to plug in Discharge spout: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at Extra Cost: Feed auger + €970 net Cyclone (to be mounted by customer; should be max. 10 m away) + €2,970 net Simple filter €1,750 net --- Further Options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve (for pressureless material discharge) + €5,750 net Control system: from €1,620 net Special dissolver extension 3 m (other dimensions on request) + €9,750 net Briquetting press MPP 180 S; lightly used demo unit 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request --- Description: The muetek bale breaker was developed for loosening round and square bales of hay and straw. The shredder attached to the bale breaker processes straw from all types of grain, hay, corn, and miscanthus. muetek machines of the MHZ/MHB series are characterized by a robust design and a heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale is placed using a front loader. The support can be adjusted according to the type of bale. The chain conveyor feeds the bale against the milling rotor; the feed speed is adjustable. The milling rotor is equipped with several teeth that tear apart the straw bale. The separated straw is discharged. --- As a rule, the machines are suitable for dry input materials: - Straw - Hay --- The processing of hemp is only possible with a special dissolver. Extra cost approx. €9,720 net, depending on version. The shredder cannot process hemp with the straw mill. Requirements for the input material: Maximum moisture content 12%.

Gamybos metai: 2025, Sąlyga: naujas, - Drum diameter 1600 mm - Drum length 2880-3880-4880 mm - Working length 2000-3000-4000 mm - Screen holes as per your specifications - The screen is made from a closed profile - A 300 mm diameter cleaning brush is mounted along the screen and the entire working length - Flat bar paddles installed in the center of the drum enable material tumbling - Drum rotation speed approx. 11.5 rpm - Screen feed by geared motor – drum drive by geared motor + 2 rubber drive wheels, 230 mm diameter - Screen equipped with electrical control panel - Gravity feed hopper, dimensions: Width 1600 mm, Length 1400 mm, Height 1200 mm Bodpfxoq T Sp Hj Agijcw - 12 months warranty - Made in Europe - CE compliant

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 11629, Rotor diameter: 450 mm Rotor width: 800 mm 5 x 5 knife rotor (staggered arrangement) Bcjdpjghgqajfx Agiow 2 rows of stator knives Infeed opening approx. 600 x 800 mm Drive motor 55 kW With soundproof enclosure, mobile

Sąlyga: geras (naudotas), Gamybos metai: 2006, veikimo valandos: 1 522 h, Prekės ženklas: Husmann Tipas: SPB 22 SEN-E Bcedpfx Aoxbpr Ajgisw Pagaminimo metai: 2006 Talpa: 22 m³ Iškrovimo durys: viršuje kabinamos Pritvirtinimas: kabliukas priekyje