Rotoriaus žirklinis

ZENO ZRS 1600x1200

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 20 000 l, Diesel Filling Station – Home Fuel Station – Tank System – Small-Scale Tank Station Consisting of: 1 x 20m³ Storage Tank – factory new 1 x Dispenser Type eco 75 – factory new Description of Steel Tank: 20,000 litres capacity according to EN 12285-2 – Class B (Replaces DIN 6616), above-ground, double-walled, including test certificate, suitable for installation in Seismic Zone 0. The tank is equipped with two saddle feet, a manhole with dome cover and comes with the following fittings: - 1 fill pipe with TW cap (filling cap) and dip pipe - 1 gauge pipe with dipstick and dipstick cap - 1 vent pipe with vent hood - 1 factory-new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for withdrawal purposes - 1 optical leak detector with type approval and leak detection fluid The tank is externally sandblasted, primed, and coated in RAL7011 iron grey. (Other RAL colours available at extra cost.) Length = approx. 6.90 m + approx. 0.70 m (bracket) – diameter = 2.00 m – weight approx. 4.2 tons – ex works, loaded free of charge Description of Dispenser: Type eco 75 – not calibratable Flow rate up to approx. 75 l/min. Suitable for diesel fuel, including: - Tank management system with connection to myTecalemit cloud - Incl. web-based tank data management software – Basic module - 2 identification systems driver/vehicle for max. 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase AC motor – 230 Volt - Oval gear meter with pulse generator, accuracy approx. +/- 0.5% - Angle seat filter / dirt filter with fine mesh - 4 m dispensing hose DN 25 with type-approved automatic nozzle, incl. swivel joint and hose holder - Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated steel housing Dimensions: approx. 1,410 x 520 x 275 mm - Two-line, illuminated monochrome display, character height 8 and 19 mm - Data storage for up to 10,000 dispensing records - Menu navigation in German, English and French Crodpfxei Artlo Ag Ieg Magnetic keys / transponders are required in addition: General Information: The price for the filling station is ex works Söhrewald near Kassel, loaded free of charge. (Delivery can be offered at low cost for an additional charge.) You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Further tank systems (new and used), as well as rental units, are also available! Additionally, we buy back existing tank systems and can professionally empty, clean, dismantle and transport them with certified specialist contractor qualification according to the German Water Resources Act (§ 62 WHG).

Būklė: naujas, Hopper opening: 2,500 x 2,000 mm Rotors: 2 units Rotor swing diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Hydraulic screen door locking for tramp material ejection Cedpfjbq St Hjx Ag Iorg Weight: approx. 18,500 kg

Būklė: naujas, Pozicijų skaičius: 80 Svoris: 150 kg Būklė: nauja Angos skersmuo: 28 mm Matmenys I x P x A: 0,8 x 0,6 x 0,05 m Spec. rinkinys, 80 dalių, 28 mm sistema Credpfoyv I Eyjx Ag Ieg Medžiaga: mėlynuotas kokybiškas plienas Pristatymo komplektacija žiūrėkite nuotraukose Stalas neįeina į komplektą!!

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Cedpfefi Tg Hox Ag Isrg Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Gamybos metai: 2024, būklė: naujas, Motorized guillotine shear Csdpfx Agshk Nf Rj Isrg Technical specifications: Cutting capacity: 2.5 mm Cutting length: 2550 mm Cutting angle: 1°40‘ Strokes per minute: 35 1/sec Motor power: 3 kW Backgauge range: 550 mm Table width: 400 mm Table height: 850 mm Height: 1260 mm Width: 1350 mm Length: 3100 mm Weight approx.: 1540 kg

Būklė: naudotas, rida: 19 950 km, pirmoji registracija: 11/1989, kuro tipas: dyzelinas, ašių konfigūracija: 4x4, pavaros tipas: mechaninis, Gamybos metai: 1989, Įranga: visų varančiųjų ratų pavara,

Būklė: paruoštas naudoti (naudotas), Smulkintuvas su dyzeliniu varikliu, pvz., varikliams, pavarų dėžėms, metalui, elektros dalims. Įrenginys visiškai paruoštas darbui, galime atsiųsti vaizdo įrašą. Crodpfxow Ngn Es Ag Ijg

Būklė: geras (naudotas), Gamybos metai: 1988, Kraštų lankstymo staklės, lenkimo presas, švytuoklinės lankstymo staklės, štampavimo lenkimo staklės -Pristatymas: esamoje, kaip apžiūrėta, būklėje, žr. nuotraukas -Funkcija: rankinis valdymas (be automatinio režimo) -Gamintojas: RAFAMET švytuoklinės lankstymo staklės, tipas KM-4 -Pavara: mechaninė Credpfx Agsv Tpxqs Ieg -Maks. darbo plotis: 2020 mm -Maks. lakšto storis: 4 mm -Atstumas iki atmušos: 750 mm -Galia: kW -Matmenys: 3350/1540/H1510 mm -Svoris: 3900 kg

Būklė: naujas, Gamybos metai: 2026, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 400 V, bendras svoris: 66 kg, Mūsų 5 kW elektrinis grandininis pjūklas puikiai tinka pjauti rąstų ryšulius kartu su mūsų rąstų pjovimo stovu. Pjaunant visus malkų rąstų ryšulius gerokai sumažėja rankų darbo apimtis! Vienam žmogui dirbant galima apdoroti iki 1 kubinio metro medienos per kelias minutes ir maždaug 5 kubinius metrus per valandą. Vidutinė pjūvio trukmė – 1,5 minutės. Csdefnrx Tjpfx Ag Ijrg

Gamybos metai: 2022, būklė: naujas, Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminium angled conveyor belt including substructure Horizontal section: 2,500 mm (customizable) Inclined section: 4,000 mm (customizable) Angle at the bend is freely and infinitely adjustable Feed height: horizontal (customizable) Discharge height: individually adjustable Design: height-adjustable (mobile) Conveyor belt width: 600 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt including cleats and wave edge Drive: 1.1 kW motor (customizable), speed approx. 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Cjdpfxeilg U Es Ag Isrg Drive and components ready for connection, motor control optional 8x adjustable machine feet for leveling Wave edge: 50x30 mm T-40 cleats with 300 mm spacing 2-ply for enhanced cross stability We always have various systems of this type in stock. The delivery time for a custom-made system is currently around 2–3 weeks, depending on manufacturing effort. Our core competence is to provide customers exactly what they really need. We work with our customers to develop tailor-made, individual solutions and supply suitable systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator.