Koordinačių matavimo mašina

Zeiss O-INSPECT 442

Zeiss Coordinate Measuring Machine
Model: O-INSPECT 442
Machine Description: Coordinate Measuring Machine
Machine Type: O-INSPECT 442
The multisensor measurement system O-INSPECT from ZEISS enables optimal optical or tactile measurement of all features. The CALYPSO software allows for the simultaneous display of actual state, nominal profile, and deviations, making it very easy to identify and interpret measurement results.

General Data:
Dimensions: Width 1055 mm x Length 1351 mm x Height 1770 mm
Measuring Range: X 400 mm, Y 400 mm, Z 200 mm
Gbedpfszii Dhsx Adgop
Weight:
CMM: 800 kg
Workpiece, max.: 20 kg
Noise Level of CMM: < 70 dBA

Electrical Data:
Mains Voltage: 100, 110, 120, 125, 230, 240 V~ (± 10%)
Power Type: 1 / N / PE
Frequency: 50 to 60 Hz (± 3.5%)
Power Consumption: max. 1500 VA
Fuses:
- At 230 V or 240 V: C 16 A
- At 100 V or 125 V: 15 A

Travel Speeds:
Creep Mode (SLOW): 0 to 5 mm/s
Setup Operation: 0 to 70 mm/s
Serial Measurement Operation
- Axis (X, Y): max. 200 mm/s
- Axis (Z): max. 50 mm/s
- Axis (3D): max. 287 mm/s

Environmental Conditions:
The following conditions must be met for proper operation of the coordinate measuring machine:
- Ambient temperature for operational readiness: +17˚C to +35˚C
- Relative Humidity: 40% to 70% (non-condensing)
- Room temperature during measuring operation: 20˚C ±1 K
- Altitude above sea level:
- 100-125 V: max. 3000 m
- 230-240 V: max. 2000 m

Probe System:
Probe System: CFS
Probe Type Data:
- Probe Type: CFS 2mm
- Measuring Range: 2 mm; Working Distance: 61 mm; Spot Diameter: 12.5 µm
- Measurable Surface Tilt Relative to Incident Direction: 90 ± 15°
- Measuring Range: 3 mm; Working Distance: 22.5 mm; Spot Diameter: 12 µm
- Measurable Surface Tilt Relative to Incident Direction: 90 ± 30°
- Measuring Range: 10 mm; Working Distance: 70 mm; Spot Diameter: 24 µm
- Measurable Surface Tilt Relative to Incident Direction: 90 ± 20°
*Values for surface angles are limit values and depend on the reflectivity of the workpiece surface.

Rotary Table:
Mass and Resolution:
- Mass of Rotary Table: 7 kg
- Resolution: 0.15’’
Dynamics:
- Angular velocity: max. 50˚/s
- Rotational speed: 8.3 min⁻¹

Scope of Delivery:
The standard version of the O-INSPECT coordinate measuring machine includes the following components:
- Coordinate Measuring Machine (CMM)
- Control Unit (integrated)
- Control Panel
- Computer with peripherals
- Software: CALYPSO 5.2
- Documentation
- Probe System
- Reference Probe
- Calibration Standard
- Calibration Template

Scope of delivery: (Zeiss Coordinate Measuring Machine as shown)
Condition: used
(Technical data subject to change and errors excepted!)
Please enquire about transport options before purchase.

For further questions, we are happy to assist you by phone.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.