RST mygtuką

Zeiss

Būklė: labai geros būklės (naudotas), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Description: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measurement system O-INSPECT from ZEISS enables optimal optical or tactile measurement of all features. The CALYPSO software allows for the simultaneous display of actual state, nominal profile, and deviations, making it very easy to identify and interpret measurement results. General Data: Dimensions: Width 1055 mm x Length 1351 mm x Height 1770 mm Measuring Range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM: 800 kg Workpiece, max.: 20 kg Noise Level of CMM: < 70 dBA Electrical Data: Mains Voltage: 100, 110, 120, 125, 230, 240 V~ (± 10%) Power Type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5%) Power Consumption: max. 1500 VA Fuses: - At 230 V or 240 V: C 16 A - At 100 V or 125 V: 15 A Travel Speeds: Creep Mode (SLOW): 0 to 5 mm/s Setup Operation: 0 to 70 mm/s Serial Measurement Operation - Axis (X, Y): max. 200 mm/s - Axis (Z): max. 50 mm/s - Axis (3D): max. 287 mm/s Environmental Conditions: The following conditions must be met for proper operation of the coordinate measuring machine: - Ambient temperature for operational readiness: +17˚C to +35˚C - Relative Humidity: 40% to 70% (non-condensing) - Room temperature during measuring operation: 20˚C ±1 K - Altitude above sea level: - 100-125 V: max. 3000 m - 230-240 V: max. 2000 m Csdpfx Abozii Dhs Rsgw Probe System: Probe System: CFS Probe Type Data: - Probe Type: CFS 2mm - Measuring Range: 2 mm; Working Distance: 61 mm; Spot Diameter: 12.5 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 15° - Measuring Range: 3 mm; Working Distance: 22.5 mm; Spot Diameter: 12 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 30° - Measuring Range: 10 mm; Working Distance: 70 mm; Spot Diameter: 24 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 20° *Values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and Resolution: - Mass of Rotary Table: 7 kg - Resolution: 0.15’’ Dynamics: - Angular velocity: max. 50˚/s - Rotational speed: 8.3 min⁻¹ Scope of Delivery: The standard version of the O-INSPECT coordinate measuring machine includes the following components: - Coordinate Measuring Machine (CMM) - Control Unit (integrated) - Control Panel - Computer with peripherals - Software: CALYPSO 5.2 - Documentation - Probe System - Reference Probe - Calibration Standard - Calibration Template Scope of delivery: (Zeiss Coordinate Measuring Machine as shown) Condition: used (Technical data subject to change and errors excepted!) Please enquire about transport options before purchase. For further questions, we are happy to assist you by phone.

Būklė: naudotas, Technical details: x-axis: 120 mm z-axis: 610 mm diameter: - mm measuring range Y-axis (height): 0 - 610 mm weight: 19 kg interfaces: 2x RS-232C, 2x USB-A/B total height: 950 mm measuring system resolution: 0.0001 mm power consumption: 43 watts installation space (W x D x H): 320 x 330 x 950 mm Csdpfx Aewa A Hmob Rogw TWO-COORDINATE HEIGHT GAUGE with two probe holders: 0–872 mm manual adjustment speed air bearing interfaces: 2x RS232C and 2x USB (A+B) setting standard 25 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 201502530269, matavimo diapazonas X ašis: 700 mm, matavimo diapazonas Y ašis: 700 mm, matavimo diapazonas Z ašis: 600 mm, stalo apkrova: 560 kg, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of manufacture: 2015 | Commissioned: 2016 | Perfect condition | Very low operating hours For sale: CMM (Coordinate Measuring Machine) ZEISS Contura G2 with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe. The device comes from a controlled laboratory environment and has only been used "on-demand" during a single shift, never on a production line – resulting in very low actual mileage and excellent technical condition. Cjdpfxoyzmbdo Ab Rjgw 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring range (X/Y/Z): 700 / 700 / 600 mm Year of manufacture: 2015 Year of commissioning: 2016 Technical & visual condition: perfect Measurement error MPE (E0): 1.7+L / 350 μm 🔹 Configuration & Equipment ✅ ZEISS VAST XXT TL1 active scanning probe ✅ Probe rack / changer ✅ Probe styli set (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Calibration sphere ✅ BP26_SE control console 🔹 Usage History Device operated exclusively in laboratory mode Sporadic, project-based use ("on-demand") Single shift, no serial or production work This results in very low mechanical wear 🔹 Service & Calibration ✅ Service and calibration performed exclusively by official ZEISS service ✅ Regular maintenance as per manufacturer’s recommendations ✅ No third-party intervention ✅ Device fully functional 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Complete documentation ✅ Transport on buyer’s side

Būklė: geras (naudotas), Zeiss Primovert invertuotas mikroskopas (SN: 3841010097) WF 10x/20 okuliarai Zeiss Primo Plan-Achromat 4x/0,10 Zeiss Primo Plan-Achromat 10x/0,25 Ph1 Zeiss Primo Plan-Achromat 20x/0,30 Ph1 Zeiss Primo Plan-Achromat 40x/0,50 Ph1 Ph1 / 0,3 fazių slankiklis Cgedpozhidrsfx Ab Rsw Apsauginis dulkių gaubtas

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, The V9 height measuring instrument has been developed for the most demanding users. Laboratories and workshops that prioritise measurement reliability will appreciate its exceptional precision and “Swiss Made” quality. Technical performance was the main focus in developing this height gauge. No compromises were made on accuracy or repeatability. As a result, certain design features, particularly the probe, differ from other models. The display, based on a fully tactile interface, offers a level of user-friendliness never before achieved on a vertical measuring device. The displayed menus and functions follow a well-defined design and philosophy, enabling high efficiency even with complex tasks such as programming, 2D mode, angle measurement or statistical analysis of results. V9 models are equipped with a revolutionary displacement handwheel that allows the user to choose between manual or motorized displacement modes. Measuring ranges: 400 to 1100 mm Exceptional precision level Electronically adjustable measuring force Manual or motorized movement 2D, programming, statistics Comprehensive range of accessories All settings tool-free RS232 and USB interfaces Optional wireless data transfer V9 Models: V9 – 400 Measuring range (mm): 406 Measuring range with extension (mm): 724 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Deviation of front squareness (µm): 5 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 21 V9 Models: V9 – 700 Measuring range (mm): 710 Measuring range with extension (mm): 1028 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Deviation of front squareness (µm): 8 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Cgodpew R Nv Iofx Ab Rsw Autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 24 V9 Models: V9 – 1100 Measuring range (mm): 1109 Measuring range with extension (mm): 1427 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Deviation of front squareness (µm): 11 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 33

Būklė: naudotas, Originalūs ZEISS CMM zondų laikikliai ir ilgintuvai Originalūs ZEISS zondų laikikliai Zondo ilgintuvai Įvairūs žvaigždės formos ir tiesūs zondai Kaip parodyta nuotraukose Būklė: Naudota Gera darbo būklė Atsargiai išimta iš veikiančio ZEISS CMM Cjdpfezg Eczox Ab Rogw Puikiai tinka ZEISS CMM naudotojams, ieškantiems originalių atsarginių dalių ar papildomos matavimo įrangos.

Būklė: labai geros būklės (naudotas), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard drive for internal image storage, as well as drives for external saving of data and images. This enables quick and easy acquisition of information about the composition and morphology of specimen surfaces down to the sub-micrometer scale. With a magnification range from 5x to 300,000x, both macrostructure and microstructure investigations are possible. The application range can be significantly expanded by using special add-ons, allowing for analytical examinations of microareas on the surface, for example. Operation of the device can be conducted either via conventional control elements or via keyboard and mouse (optional). Electron optics and vacuum control are operated conventionally. Image memory functions are operated using the keyboard or mouse (optional). Centrally located on the control panel is a separate info screen for menu display. This user manual serves as a guide to help users achieve the best possible results with the device. The explanations have been kept as simple as possible to provide even less-experienced users with the necessary tools. Magnification range: 20x to 300,000x at 7 mm working distance Steps in a 1-2-3-5-10 sequence Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm – guaranteed with tungsten cathode at 30 kV, 6 mm working distance, un-tilted specimen 25 nm – guaranteed with tungsten cathode at 1 kV, 6 mm working distance, un-tilted specimen 3.5 nm – guaranteed with optimum LaB6 cathode at 30 kV, 6 mm working distance, un-tilted specimen Csdpfszdthyjx Ab Rogw Scope of delivery: (DSM 962 with accessories as pictured) Condition: used (Specifications and data may be subject to change and errors reserved!) Please ask about shipping options before purchase. We are also happy to answer further questions by phone.

Gamybos metai: 2002, būklė: naudotas, x-axis travel: 210 mm z-axis travel: 350 mm Maximum load: 25 kg Distance C/Z-axis (mm): 270 mm Maximum test diameter (mm): 300 mm Rotary axis C (turntable): 0° 90° 180° 270° Turntable diameter: 150 mm Cgedpfsrxxc Hjx Ab Rsw Measuring travel R-axis: 170 mm Space requirement approx. L2.0 x W0.8 x H0.82 m Scope of delivery: - HOMMEL TESTER FORM 1004 - Work table - Turntable (rotary axis C) - All documentation - TURBO FORM 8.21 software + licenses - Accessories (see pictures) Condition: - As new - Fully functional Maintenance: - Last inspection on 03.08.2021 - Inspection protocol from Jenoptik available

Gamybos metai: 1990, būklė: naudotas, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement kW Machine weight approx. t Space requirement approx. m Overhauled: 2000 Csdpfx Aot Hwqkeb Regw X-axis as longitudinal, traversing gantry 850 mm Y-axis cross slide in gantry 1,200 mm Z-axis as measuring head quill (vertical) approx. 600 mm Passage width between gantry legs approx. 1,000/1,080 mm Passage height approx. 750 mm Table size approx. 1,000 x 2,100 mm Table height above floor approx. 850 mm Machine height approx. 3,050 mm Weight approx. 3,800 kg Special equipment / Accessories: - Granite plate as measuring table and gantry head, vibration-damped - 3D measuring touch probe head for 5 different styli and for SCANNING mode for continuous data capture, resolution 0.1 µm - CNC control for simultaneous 3-axis movement - HEWLETT-PACKARD computer system H 382 with color screen, floppy drive, keyboard, possible printer - ZEISS software included: UMESS 300/MFT 300 with extension package (status 1998), plus 302 form & positional tolerance measurement, 303 fitting functions, 305 automatic operation, 307 Parameter Ctrl. Manager, plus option Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / borehole pattern program A 741 and Probe Check 99, - Mobile hand control panel with progressive joystick for continuously variable travel speed in 3 axes - Probe magazine mounted on the machine, equipped with 3 probes, including probe changer - Separate electrical and control cabinet type 608485, separate computer desk, separate cabinet - Operating manuals, various measuring probes, and bolt-on calibration spheres / reference standards for the table

Gamybos metai: 1995, būklė: naudotas, x-travel: 9,200 mm y-travel: 1,600 mm z-travel: 2,400 mm Test piece diameter: mm Working area: mm Distance between centers: mm Control system: ZEISS C 99 Total power requirement: kW Machine weight: approx. 30 t Space requirement: approx. 10 x 3.6 m Z E I S S - S T I E F E L M A Y E R Double-sided CNC traversing 3D Measuring Machine Model: SMM Duplex / Eagle Eye Year of manufacture: 1995, subsequently modernized several times Measuring stand working range: X-axis (horizontal): approx. 9,200 mm Y-axis (transverse): approx. 1,600 mm / 3,200 mm Z-axis (vertical): approx. 2,400 mm Measuring plate size (4-piece segmented): 10,000 x 3,500 mm External dimensions of measuring plate including guide rails: 10,000 x 3,650 mm Plate thickness: approx. 450 mm Height of plate above floor: 650 mm Max. traverse speed: approx. 150 mm/sec Total weight: approx. 30,000 kg Cgodpfet Hwwkex Ab Rjw Special equipment / Accessories: • Two measuring columns, mounted left and right, System C / SMM, side-shiftable along the measuring table with column cross-section for vertical adjustment 160 x 160 mm and cantilever arm cross-section for lateral adjustment approx. 80 mm x 80 mm. • Machine/CNC control unit type ZEISS C 99 - one unit per measuring column • Mounted probe head type RST-P with DSE rotary and swivel joint and CAA correction as well as a reference probe, collision protection • EAGLE EYE Navigator for optical measurement, especially on vehicle bodies and other pressed parts - enables significant time savings, retrofitted in 2007 • Probe changer position for 8 probes, mounted at the front of the plate • Measuring plate made of special cast iron, divided into 4 sections = 4 x 5,000 x 1,750 mm, equipped with height-adjustable leveling feet approx. 250 mm high, sufficient number included • T-slots lengthwise Y+/- 500 mm and various precision mounting holes with threads at specific intervals: Y = +/- 300 / 700 / 1000 mm • Note: Machine is supplied without corresponding SOFTWARE (remains at factory) and without operator panels and without calibration standards (spheres) Condition: good to very good – ideal for measurement of large automotive body parts Delivery: ex stock - as inspected (without software and operator panels) Payment: strictly net - upon receipt of invoice We look forward to your order.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas Y ašis: 615 mm, stalo plotis: 1 200 mm, stalo ilgis: 800 mm, TESA Micro-Hite M-600 Height Gauge Measuring range: 0 to 615 mm C.E. Johansson DIABASE Granite Surface Plate (Made in Sweden) - Year: 1988 - Dimensions: 1200 x 800 mm - Grade: B - Tolerance: 22 µm Codpfsqy H A Djx Ab Rjgw Offered as a set.

Būklė: naudotas, Gamybos metai: 2005, Didelė ZEISS PRO T SELECT koordinatinė matavimo mašina (CMM) - nedelsiant parduodama. Mašina anksčiau buvo įrengta profesionalioje metrologijos laboratorijoje ir demontuota laikantis visų profesionalių reikalavimų. Ji laikoma viduje ir yra paruošta transportavimui. Techninė specifikacija: * Gamintojas: ZEISS * Modelis: PRO T SELECT * Pagaminimo metai: 2005 * Serijos numeris: 131860 * Plieninis matavimo stalas: 4000 × 3000 mm * Zondų sistema: Renishaw RDS-CAA su indeksuojama galvute * Kalibracija pagal DIN EN ISO 10360 * Paskutinė ZEISS kalibracija atlikta 2025 m. (dokumentacija yra) * Pilna mašina * Laikymas viduje * Paruošta iškart pakrovimui ir siuntimui visame pasaulyje Komplektacija: * Visa ZEISS PRO T matavimo mašina * Renishaw RDS-CAA zondo galvutė * ZEISS kalibracijos dokumentacija (2025) Cgodpfjzga D Hox Ab Rew * Turima techninė dokumentacija (pagal užklausą) Papildoma informacija: Mašiną galima apžiūrėti iš anksto susitarus.

Būklė: naudotas, Dial gauge (lever-type test indicator) Passameter Manufacturer: Zeiss Jena Cgsdpfx Aboda Abae Rew Measuring range: 0-25 mm In wooden case

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Mitutoyo matavimo stalas puikios būklės, laikomas klimato kontroliuojamoje patalpoje esant 20°C temperatūrai. Reguliariai kalibruoja Mitutoyo. Cgjdpfjzd R D Eex Ab Rjw Prieinamumas: 10/2026 SP25M motorizuota matavimo galvutė su PH10MQ zondų Taktilinis ir skenuojantis matavimas Skenavimo tikslumas: iki 2,3 µm Matavimo tikslumas: iki 1,7 µm +0,4 µm kiekvienam 100 mm Maks. ruošinio svoris: 1 200 kg Granito stalo matmenys: IxP Didžiausias aukštis po tiltu: 800 mm Programinė įranga: Mcosmos 3 ir MiCAT

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, 3D Coordinate Measuring Machine / CNC Coordinate Measuring Device Manufacturer: MAUSER/ZEISS | Model: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally, a temperature-controlled hall is available. Csdpfsy Iub Sjx Ab Regw The machine has been regularly calibrated by ZEISS. The last calibration took place on 07.08.2025, the next calibration (recommended) is due for 08/2026. TECHNICAL DATA: Measuring ranges (LxWxH): 6,000 x 2,500 x 2,000 mm Axes Travels: - X-axis: 6,000 mm - Y-axis: 2,500 mm - Z-axis: 2,000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5.0 + L/250)µm, V2 = 3.5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5.0 + L/250)µm - Ambient conditions required to maintain specified accuracy: * Temperature range: 21°C +/- 3K * Temperature fluctuation: 0.5K/h, 1.0K/d, 0.5K/m - Ambient conditions for operational readiness: * Temperature range: +15°C to 35°C * Humidity: 30 to 70% General Features, Equipment: - Bridge-type measuring machine with finely machined precision guides and recirculating ball shoes - Second Y-axis with granite rail and air bearings - High-resolution Zeiss scales - Form-fit drives on all 3 axes - Collision protection for the quill and probe head (with VAST probe system) for manual and setup mode - Safety position for crane locking - Scale temperature compensation - Microprocessor control - Calibration part: cube, star stylus - Reference stylus D = 8 mm, length: 115 mm - Calibration standard D = 30 mm - incl. basic software package - Load capacity: limited only by foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation No guarantee of completeness or correctness of technical data and equipment. - Subject to prior sale -