Dirbtuvių stalčių spinta su turiniu

WSM

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, WSM dirbtuvių stalčių spintelių kombinacija su turiniu - sudaryta iš durų spintelės ir dirbtuvių stalčių spintelės Turinys sudaro: įvairios frezavimo galvutės, kietmetalio išplėtikliai, kietmetalio grąžtai, sriegikliai, spiralės grąžtai, limitiniai matuokliai, įvairūs grąžtai ir nužiedintuvai, giluminiai grąžtai, pilni grąžtai, mikrometrai, įvairios matavimo priemonės Bendri matmenys: 730 x 700 x 2400 mm Svoris: 700 kg Hfsdsyuvlkopfx Ab Sed Dėmesio: prekę būtina atsiimti tarp 2026-05-05 ir 2026-05-07 sutartu laiku. FCA D-74385 Pleidelsheim – pakrauta į sunkvežimį

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, WSM dirbtuvių stalčių spintos kombinacija su turiniu - sudaryta iš varstomų durų spintos ir dirbtuvių stalčių spintos Turinys: kūginiai išplėstuvai, trijų ašmenų frezos, formos ir diskiniai frezai, sriegikliai, spiralės grąžtai, giluminiai grąžtai, kietlydinio grąžtai, kietlydinio frezos, dviejų ašmenų frezos, cilindriniai frezai, kotiniai frezai, sriegimo grąžtai, kietlydinio sriegimo grąžtai Bendri matmenys: 730 x 700 x 2400 mm Svoris: 700 kg Dėmesio: prekę būtina atsiimti laikotarpiu nuo 2026-05-05 iki 2026-05-07, tiksli diena derinama. Hfjdpeyuvh Sjfx Ab Sod FCA D-74385 Pleidelsheim – pakrauta į sunkvežimį

Būklė: geras (naudotas), WSM Stationary Screwdriving Unit, Screwdriving Station Assembly of components for car radios and navigation systems, as well as testing of the same. The assembly station is enclosed in a protective housing. The service doors are equipped with monitored safety switches with interlock (locking mechanism). In automatic mode, the doors are locked and can only be opened after an emergency stop or in manual mode by pressing the door button on the control panel. Automatic operation cannot be started if a door is open. Process Sequence Hsdpfx Abeibichj Ssfd The station is loaded with the pre-assembled module via the conveyor belt. Below are the automated station work steps for processing a workpiece carrier (WT). Under normal operation, all three stations work in parallel. - Positioning of the WT with the pre-assembled module in station 2.1 - Lowering of the carrier with scanner and vision sensor - Scanning of the three codes (front panel, front PCB, SD PCB), cross-check with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the WT onto the conveyor - Positioning the WT with the pre-assembled module in station 2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT onto the conveyor - Positioning the WT with the pre-assembled module in station 2.3 - Lowering of the light protection hood and contacting, approaching the carrier with test sensors from below - Type-dependent testing of the illumination of SD and CD slots and pushbuttons - Functional test of the CD ejection button - Lowering the WT onto the conveyor > continue If errors occur during testing, they are displayed on the screen and can be remedied if possible. To do this, switch to manual mode and open the doors. After repair and restarting automatic operation, the WT in the station will be retested. If repair is not possible (e.g. screwdriving error), the WT is marked as NIO (Not OK) in the control system and is not processed further. A manual NIO marking and ejection is also possible. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more new and used assembly stations in our shop! International shipping rates available on request!

Būklė: labai geros būklės (naudotas), WSM SZ-250K Feed Unit The WSM SZ-250K is a feeder from WSM-Automation, specifically designed for applications with high cleanliness requirements. The “k” in the model designation stands for “kurz” (short) and refers to the shortened length of the sorting helix, which reduces the generation of abrasion caused by fill level and vibrations. Function: This device is a feeder that combines the advantages of vibratory bowl feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the core innovation to minimize contamination from abrasion. Hedpfjx Elkfex Ab Ssfd Application Area: It is used wherever high cleanliness is required during feeding to ensure clean screw assemblies. SZ-250K feeding unit includes: - Belt hopper BB-01-B (0.5 l) with fill level control and debris barrier - Spiral feeder WFL 200 IU (200 mm) with separator - Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volt You will find further items – new and used – in our shop! International shipping costs on request!

Būklė: labai geros būklės (naudotas), WSM SZ-250K Feeding Unit Hfsdpfx Abjx Elfce Sod The WSM SZ-250K is a feeding unit from WSM-Automation, specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "kurz" (short) and refers to the shortened length of the sorting spiral, which reduces wear caused by fill level and vibrations. Function: This is a feeding device that combines the advantages of bowl feeders with the necessity for clean processes. Feature: The shortened sorting spiral (effective length) is the core innovation to minimize contamination from abrasion. Application area: It is used wherever high cleanliness during feeding is required to ensure clean screwdriving processes. Feeding unit SZ-250K consisting of: - Belt hopper BB-01-B (0.5 l) with level control and dirt stopper - Vibratory bowl feeder WFL 200 IU (200 mm) with singulator - Aluminum frame with Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volt You will find more new and used items in our shop! International shipping costs on request!

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, WSM SCS6 griovimo/metalo žirklės, naudotos, 2020, 620 kg Gamintojas: WSM Abbruchtechnik Modelis: SCS6 Serijos numeris: 918931 Pagaminimo metai: 2020 Svoris: apie 620 kg Alyvos poreikis: 80-100 l/min Darbinis slėgis: apie 330 bar Triukšmo lygis: 121 dB Būklė: Įrenginys visiškai veikiantis, visi hidrauliniai cilindrai sandarūs, pjovimo peiliai nepažeisti arba dalinai pakeisti, rėmas be didesnių pažeidimų, neseniai prižiūrėtas. Galimos nuotraukos ir apžiūra. Hfjdpfx Aoxlunwjb Sod