Suvirinimo stalas

WMW ST 4x2.0

Būklė: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication Nledpslgvkiofx Acpsa - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube rotation device - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm

Būklė: naujas, NEBES TM 275 Bandsaw – 400 V Three-phase, NEW “CE” Induction motor Cast iron frame Adjustable cutting angle from 0° to 60° Fully cast iron structure Nsdpfx Ajh Nm Ncscpsla Electric pump for blade lubrication and cooling Blade tension gauge in oil bath Front controls and two cutting speeds Selector switch for excluding the coolant pump Blade guide with carbide pads (H.M.) Round cutting capacity at 0°: 220 mm Square cutting capacity at 0°: 200 x 200 mm Rectangular cutting capacity at 0°: 230 x 185 mm Round cutting capacity at 45°: 150 mm Square cutting capacity at 45°: 150 x 150 mm Rectangular cutting capacity at 45°: 150 x 200 mm Round cutting capacity at 60°: 90 mm Square cutting capacity at 60°: 90 x 90 mm Rectangular cutting capacity at 60°: 90 x 120 mm Motor power: 1.3 HP Voltage: 400 V Blade dimensions: 2450 x 27 x 0.90 mm Weight: 265 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 50 h, Funkcionalumas: visiškai funkcionalus, rankos pasiekiamumas: 1 300 mm, Tobulas paketas jūsų suvirinimo automatizacijai su naujausios kartos UR10e robotų serija – nebeįsigykite CB serijos! Nedst S U Auspfx Acpola Norite automatizuoti savo suvirinimo darbus naudojant kobotą, kad įveiktumėte būsimus iššūkius? Tuomet OH-au2mate Cobot Welding Solutions su Lorch maitinimo šaltiniu yra kaip tik jums! Idealus suderintas paketas apjungia: - aukštos kokybės robotų technologiją iš kobotų rinkos lyderio Universal - inovatyvią suvirinimo technologiją iš Lorch - intuityvią valdymo programinę įrangą Tiksli rinkinio sudėtis: suvirinimui paruoštas UR10e robotas, valdymo elementai, degiklio laikiklis, Translas 8XR ištraukiamasis degiklis, Lorch S5 400A maitinimo šaltinis.

Būklė: naujas, Gamybos metai: 2026, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Item No. 6020 With the fully automatic UniBohrFix 100 drilling machine, your material is positioned along the X-axis at the desired spot, clamped, and drilled. All you need to do is press the start button. The horizontal gripper of the positioning system allows easy pneumatic clamping of round tubes, rectangular tubes, angle profiles, as well as flat and solid materials. After simply entering the X-values or recalling a previously saved program, the machine operates completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages: • A series of holes can be drilled automatically at precise intervals. • Possible operator errors are drastically reduced. • Programming takes only a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower required. Fully automatic design Measuring length: 6,000 mm Total length: 13,500 mm NC single-axis control Pneumatic vice (clamping width 200 mm) Minimal-quantity spray unit with holder and spray nozzle Drilling machine: Unimax 3T AV (see technical data sheet for specifications) Nlsdpfx Aofu Itbecpja Rotation lock Motorised height adjustment Tapping unit NC positioning system PD 200p Feed force 200 kg Positioning by absolute or incremental dimensions possible Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack Steel carrier profile as dirt protection Infeed and outfeed roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / Load capacity 200 kg/m / Height-adjustable rollers / Mounting brackets / Roller width 407 mm / Support plates / Bracing / Roller diameter 50 mm / Steel rollers We look forward to your enquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, Drilling and Milling Automation Unit Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling automation unit with mobile machining head – the table remains stationary, the drilling head moves. The system can be operated both manually and fully automatically. After each drilling operation, the machining head automatically moves in the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine controller can be carried out using DXF/DWG file formats via a programming station. Alternatively, programming can also be done directly at the machine controller. The system is highly robust and assembled from proven machine components. Nedpfjfu Ivzex Acpela Technical Specifications: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base • Spindle speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • Drive for X, Y, and Z axes via servo motors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top to bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St-50 (depending on tool) • Thread tapping: M4 - M30 (with floating chuck) • Y-axis travel: 300 mm • Tolerance in X-axis: ±0.1 mm • Tolerance in Y-axis: 0.06 mm • Tolerance in Z-axis: 0.06 mm • Spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Front safety with light barrier • Rear access protection with safety fence • Control: 21.5" touch-screen panel, reinforced front glass • Simple on-machine programming • Milling of elongated holes and circles • Lubrication via minimum quantity spray system • Without material clamping devices • Remote maintenance via TeamViewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Workflow simulation • Digital handwheel Your Benefits: • Workpiece surfaces remain protected • Clear, graphical user interface • Machining at the end of the workpiece is easy • 50% space saving compared to moving-table operations • Chips are collected in chip tray • Easiest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated via CAD/CAM You are welcome to visit our manufacturing/demo hall to inspect the desired system at any time. Please feel free to contact us for an appointment. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw blade length 3375x27x0.9 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m Njdpfod Iipxex Acpsla SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic GBS 305 HA-I Easy - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Robust, large material support - Automatic coolant system

Būklė: labai geros būklės (naudotas), Motorized 3x3 welding column with movement control via pendant station. Usable capacity: 3x3 m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc welding unit with torch, flux hopper, and Lincoln NA-3N amperage and voltage control panel. Submerged arc duty cycle: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 V Input current: 193/96.5 A Input frequency: 60 Hz Input phase: 3 Input power: 230/460/3/60 Njdpeu Afttjfx Acpjla Mode icon: CC/CV Output range: 150–1300A DC, 16–46V Polarity: DC Rated output: 1000A / 44V / 100%

Būklė: naujas, Digital technology, the NEOPULSE 400 CW is a three-phase, pulsed MIG/MAG welder designed for heavy industry. Mobile and equipped with a cooling unit and a high-performance wire feed system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Its intuitive and functional digital interface allows for easy adjustment of welding parameters. MULTIPROCESS WELDING MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm Nsdpfx Aemxkggecpjla - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored (flux-cored) wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulosic electrodes (up to Ø 6 mm). DC TIG CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Būklė: labai geros būklės (naudotas), 3x3m Motorized Welding Column with Movement Control via Push-Button Panel. Effective Working Capacity: 3x3m Wire Spool Dispenser Lincoln Idealarc DC-600 Submerged Arc Welding Unit with Torch and Flux Holder, plus Lincoln NA-3N Panel for Amps and Volts Adjustment. Submerged Arc Duty Cycle: 600 Amps at 100% Welding Equipment: Idealarc DC600 220/380/440 3/50/60 Nlsdpfx Aeu Afwljcpsa Input Voltage: 220/380/440V Input Current: 116/67/58A Input Frequency: 50/60 Hz Input Phase: 3 Input Power: 220/380/440V/3/50/60 Output Range: CV: 70A/13V - 780A/44V CC: 90A/24V - 780A/44V Rated Output: 600A/44V/100% 680A/44V/60%

Būklė: naujas, Bernardo TM 36 BLO/ R 1200 Electric Tapping Machine Technical Specifications Tapping capacity*: M5 - M36 Tool holder: GT 24 Max. speed: 30 - 150 rpm Adjustable angle: 0° - 90° Max. working radius: R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power: 1200 W Voltage: 230 V Weight approx.: 35 kg * Material strength 400 N / mm2 Scope of delivery - Operation via touchscreen - Digital drilling depth display Nljdpfx Ajpag R Recpsa - Micro-spray system - Chip blow-off device - Quick-change holder - Quick-change chuck according to DIN standard - Electric motor - 90° angle adjustment - Mounting flange Features - Standard equipped with micro-spray system for constant cooling and minimal coolant consumption - Includes chip blow-off device for removing chips, providing an optimal view of the borehole - Includes quick-change chuck for use with taps for through and blind holes - Swivelling motor unit for tapping at any desired angle between 0° and 90° - Higher accuracy compared to manual tapping, guaranteeing a perpendicular (90°) thread - High productivity, significant time savings compared to manual tapping - Quick-change chuck with integrated slip clutch prevents tap breakage - Includes swivel arm with large radius for easy positioning of the tap on the workpiece - Suitable for tapping steel, stainless steel, aluminium and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series €830.00 plus 19% VAT.