Vamzdžių pjūklas - orbitinis pjūklas FEIN

Rohrumlaufsäge RDG - 18 - 2b

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Ljdpjhzbipsfx Af Ijrg Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Sąlyga: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). Ljdpfx Aof Sqckof Ierg This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Gamybos metai: 2016, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, generuojamas, pristatymo terminas 2026 m. sausio pabaiga, 12 mėn. garantija - Maksimali temperatūra 200°C; pagal pageidavimą gali būti padidinta iki 250°C - Vidiniai matmenys: plotis 1000 x gylis 1000 x aukštis 1500 mm - Išoriniai matmenys: plotis 1765 x gylis 1425 x aukštis 2300 mm - su Jumo Dicon Touch valdikliu Ljdpfx Aovk Navsf Isrg - Įvažiavimo bėgiai krosnies pakrovimui - Šildymo galia 36 kW - Savasvoris: 780 kg - Ištraukimo antgalis; išmetimo ventiliatorius ir elektrinis vožtuvas gali būti sumontuoti pagal pageidavimą - Pakrovimo vežimėlis pagal užklausimą (nuotrauka) - Dokumentacija, CE deklaracija Galime organizuoti įrengimo ir paleidimo paslaugas. Apžiūra mūsų sandėlyje pagal susitarimą. Krosnis, krosnys, džiovinimo krosnis, degimo krosnis, šilumos krosnis, šilumos spinta, pramoninė krosnis, atkaitinimo krosnis, kaitinimo krosnis, grūdinimo krosnis, džiovinimo spinta, kamerinė krosnis, užkepimo krosnis, recirkuliacinė džiovinimo spinta, recirkuliacinė krosnis.

Sąlyga: naujas, GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid materials, and profiles of all kinds. Materials: Hard or soft steel, non-ferrous metals, plastics. Operation: After adjusting the workpiece support and the side stops, the burr-laden workpiece is lightly pressed against the brush, which rotates around its own axis. The workpiece itself is not rotated; the brush performs this movement. The type of workpiece material, the thickness of the burr, and the desired edge rounding determine the contact pressure and duration, which is typically about 1–5 seconds. Technical specifications: Material: Steel, stainless steel, and non-ferrous metals (motor speeds 700–1,900 rpm, infinitely variable) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø300 (250) x 50 mm or 3 pieces Ø300 (250) x 35 mm Drive power: 3.0 kW Connected load: 3.5 kW Operating voltage: 3~, 400V, 50 Hz Rated current: 8A Pre-fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + handwheel 74 mm, + suction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), during processing at maximum speed 82 dB(A) Scope of delivery: Rotary head deburring brush machine GratMaxx with power socket, without cable Workpiece support table with adjustable angle stop and workpiece stops Tool for brush replacement No brushes included in delivery! Accessories: F50201 Circular brush, braided wire 0.38 mm Lrodpod Hmnfefx Af Iog F50202 Circular brush, steel wire 0.2 mm F50203 Circular brush, steel wire 0.38 mm F50204 Circular brush, VA braided wire 0.38 mm F50205 Circular brush, abrasive nylon U180 F50206 Circular brush, abrasive nylon U120 F50207 Circular brush, VA wire 0.20 mm For further technical data, please refer to the attached PDF document.

Sąlyga: naujas, Semi-automatic band saw for cutting solid bars and medium-sized profiles with high efficiency and excellent cutting precision. The robust structure provides the machine with the required rigidity and precision to the cutting group. The band drive is powered by a two-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Properly sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide (Widia) plates. Blade tension achieved via an electromechanical device with blade rotation microswitch control. Safety devices against accidents on the flywheel cover guard and the blade. Cutting thickness 1.5 mm. Cutting range 60° left / 60° right. Adjustable stop for repetitive cuts of the same length. Blade cleaning device with brush. Hydraulic power unit motor 0.37 kW. Electric pump 0.09 kW for band cooling. Vice jaw height 200 mm. Vice jaw length 185 mm. Ledpfefibd Tjx Af Iorg Working table height 760 mm. Machine weight 820 kg.

Sąlyga: geras (naudotas), Gamybos metai: 2011, mašinos/transporto priemonės numeris: MS 1153, Technical data (approx.): - Passage to blasting chamber: W 370 x H 170 mm - Blasting nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery - Separate control panel - Space requirement blasting unit: 1600 x 2000 x H 1750 mm - Space requirement blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ Lodpfx Afollvr Ds Isrg - Air volume: 700 - 1500 m³/h - Suction fan: 3 kW - Space requirement filter unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Gamybos metai: 2023, Sąlyga: naujas, SONDA ist eine wirtschaftliche Lösung zur Anschaffung einer Ultraschall-Reinigungseinheit. Wenn Sie bereits über einen eigenen Edelstahltank verfügen und diesen in eine Ultraschallwascheinheit umwandeln möchten, ist SONDA die ideale Wahl. Wir fertigen SONDAs unabhängig von den Abmessungen Ihres Tanks. Sagen Sie uns einfach die Maße Ihres Tanks, und Sie können die Einheit unkompliziert an Ihrem Behälter montieren. Funktionsprinzip: - Jede einzelne, eintauchfähige SONDA-Einheit arbeitet mit ihrem eigenen, separaten Hochfrequenzgenerator. - Die eintauchbaren SONDA-Einheiten sind montagefertig für die Tankwand vorbereitet. - Ideal für große Behälter in der Beschichtungs- und Oberflächenbehandlung. Eintauchschwinger, Ultraschallreiniger, Schwinger, Ultraschall Lrjdpfjd I E Ivjx Af Iog Für technische Spezifikationen stehen wir Ihnen gerne zur Verfügung.

Sąlyga: naujas, Bernardo Horizontal Bandsaw HBS 275 – 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H):1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw band • Workpiece stop • Base frame • Pressure gauge for band tension • Vice with quick-action clamp • Coolant system • Hydraulic lowering cylinder • Motor protection switch Ljdpfxsd Du T Ie Af Iorg • Automatic shut-off

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 55,4 kW (75,32 AG), bendras svoris: 2 050 kg, kuro tipas: dyzelinas, spalva: originalus, ašių konfigūracija: 1 ašis, darbinė masė: 2 050 kg, tuščias svoris: 2 050 kg, kuras: dyzelinas, Technical Data: Round timber up to 24 cm Feed width 300 mm Base weight approx. 2050 kg Year of manufacture: 2022 4-cylinder Hatz turbo diesel engine With common-rail technology and diesel particulate filter Complies with EURO 5 emissions standard. Mounted on a single-axle chassis for 80 km/h Power Control System Water-cooled 4‑cyl. Hatz turbo diesel engine, 55 kW (74.8 HP), with common-rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Tow bar with overrun brake Front jockey wheel Rear support stand Lighting according to German StVZO (impact protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of feed speed and thus chip size Chopping knives resharpenable multiple times for long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic infeed Particularly grippy, aggressive, and uniform feed, each roller powered by its own hydraulic motor Discharge chute with adjustable spreader flap, swivel-mounted Discharge chute on ball bearing turntable Relevant machine parts with sound insulation Features: Engine and Chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, produces 55.4 kW (75.3 HP). Automatic industrial freewheel clutch between engine and chipping disc protects the engine, bearings, and shaft. Fully galvanized, corrosion-resistant single-axle chassis, approved by TÜV, for speeds up to 80 km/h. Sturdy, fixed steel mudguards. Provisions for front jockey wheel and rear support stand. Height-adjustable tow coupling with overrun brake and soft dock ball hitch or DIN towing eye. Lighting as per StVZO with impact-protected components. Lredpfov Evx Ujx Af Iog Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/Hopper/Discharge Chute: Rotatable chipper housing with adjustable feed angle up to 270°. Foldable feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (internal): width = 1,160 mm, height = 1,040 mm. Swiveling discharge chute with adjustable spreader flap. Discharge chute on ball bearing turntable for flexible orientation. Sound insulation on relevant machine components, such as the chipper hood and discharge chute. Emergency stop button located on top of the hopper and on the side of the hopper flap. Chipping System: Safety circuit compliant with EN 13525. Chipping disc with a diameter of Ø 800 mm and a thickness of 40 mm. Closed knife system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable multiple times for long service life. Horizontal counter blade can be used 4 times; vertical counter blade can be used 2 times, for extended service life. Wrap protection at the main bearing of the chipping disc. Hydraulic Feed: Infeed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic infeed for reliable and consistent material transport. Parallel guide for the upper roller ensuring even feeding without skewing. Hydraulically adjustable feed speed for controlling chip size. Level indicator for the hydraulic oil tank.

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding positioner Protec KT 300 H, 170/400 special version Load capacity horizontal: 300 kg, tilted: 150 kg Lsdpfsrypmgox Af Iorg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor, infinitely adjustable from 0 to 90° Speed continuously adjustable from 0.01 to approx. 5 rpm Includes foot remote control Digital display with welding time limitation (optional)