Centrinės tekinimo staklės

WMW Niles Ø 1400 x 2000 mm

Sąlyga: geras (naudotas), Gamybos metai: 2018, Stalas 1473 x 305 mm, XYZ eiga: 1000 x 410 x 400 mm (kelio), špindelio eiga 127 mm, špindelio kūgis ISO40, galios užraktas, špindelio variklis 5 AG, špindelio greičiai 70 - 3600 aps./min., Bcjdsxftqdspfx Abfou Prototrak SMX CNC valdymas,

Sąlyga: geras (naudotas), Gamybos metai: 2008, šlifavimo ilgis: 1 250 mm, stalo ilgis: 1 250 mm, stalo apkrova: 1 200 kg, stalo plotis: 500 mm, veleno greitis (maks.): 2 600 aps./min, veleno greitis (min.): 1 000 aps./min, bendras svoris: 9 300 kg, X ašies eiga: 1 400 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 600 mm, galia: 185 kW (251,53 AG), įėjimo įtampa: 400 V, reikalingas aukštis: 2 870 mm, Įranga: sūkių greitis be galo kintamas, X-axis: Grinding length 1,250 mm, travel distance 1,400 mm Y-axis: Distance table to spindle center 700 mm, travel distance 600 mm Bcjdpfx Aou Hiq Rsbfsu Z-axis: Grinding width see note, travel distance 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel distance and the grinding wheel width. Example: Transverse travel = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

Sąlyga: geras (naudotas), Gamybos metai: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Bedpfjw Dvkaox Abfjcu Technical specifications – Main data: - Table surface: 605 x 300 mm - Max. longitudinal table travel (manual): 750 mm - Cross table travel: 340 mm - Grinding height between table and new grinding wheel min/max: 22.5 / 322.5 mm - Standard magnetic chuck size: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X-axis / Longitudinal travel: - T-slots (quantity x width): 3 x 17 mm - Table feed, hydraulic: 0.3–25 m/min - Travel per handwheel revolution: 47 mm Y-axis / Vertical movement: - Automatic vertical feed – coarse, 12 steps: 0.001–0.03 mm - Automatic vertical feed – fine, 8 steps: 0.001–0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Scale division on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes (Ausfeuerhübe): 0–5 - Rapid traverse: 400 mm/min Z-axis / Cross travel: - Automatic intermittent cross feed: 0.5–20 mm - Automatic continuous cross feed / rapid traverse: 0.1–1.0 m/min - Travel per handwheel revolution: 5.0 mm - Scale division on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 rpm Accessories: various grinding wheels Documentation included

Sąlyga: geras (naudotas), Gamybos metai: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled Axes: X / Z TECHNICAL DATA Turning length: 540 mm Spindle: Motor spindle 11/16 kW Tool holder: VDI30 with 12 stations Main spindle: AC motor - Speed: up to 5,000 rpm - Spindle nose: Main spindle A2-6" - Drive power (100/40% DC): 11 / 16.5 kW Turret: 12 stations - Driven: 12 stations - Tool holder: VDI 30 FEATURES + Technology cycle for using alternating spindle speeds for vibration-critical workholding + Direct position measuring system X-axis + Programmable positioning and pressure force + Ergonomic DMG MORI SLIMline® operating panel + Hollow chuck device, max. bar capacity D65 mm + Tailstock, hydraulically traversable via M-function + External electronic handwheel + Chip disposal package: + Chip conveyor with right-hand side discharge instead of chip tank + 4-color signal lamp + Differential pressure clamping for the main spindle Bedpfxsw Hxi De Abfscu + Foot pedal for tailstock + Automatic NC tailstock for maximum machining flexibility – full control of force in the range from 0.7 to 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool setting device in work area, make MARPOSS + Mechanical oil mist separator type AFS 600 Modifications and errors in the technical data and information are subject to change.

Sąlyga: naudotas, Swing diameter / mm Turning length / mm Swing diameter over cross slide / mm Technical Data – Model 230 DIMENSIONS Centre height over bed: 230 mm Distance between centres: max. 1600 mm Bed width: 360 mm Maximum turning diameter: over bed: 465 mm over carriage: 278 mm over fixed steady rest: 200 mm over travelling steady rest: 160 mm GAP Width of gap: 300 mm Distance between faceplate edge and gap: 150 mm Maximum turning diameter in gap: 690 mm SPINDLE Bore diameter of front bearing (internal): 110 mm Bore diameter of rear bearing (internal): 95 mm Spindle bore: 77 mm Mounting type - Cam Lock: 6" Bsdpfxowz Rywe Abfecu Internal taper of spindle - Taper: 1 : 20 Spindle taper - Morse Taper No.: 5 Spindle speed ranges: Low - RPM: 15÷1000 Medium - RPM: 22÷1500 High - RPM: 30÷2000 FEEDS (without gear change) - No.: 108 Longitudinal feed range per revolution: 0.04÷4 mm Cross feed range per revolution: 0.02÷2 mm Leadscrew diameter: 40 mm Leadscrew pitch: 12 mm THREAD CUTTING (without gear change) Metric - No. 54 from: 0.5÷28 mm Module - No. 54 from module: 0.25÷14 Whitworth - No. 54 from TPI x 1": 56÷1 Diametral Pitch - No. 54 from D.P.: 112÷2 Inch (imperial) - No. 54 from inch: 1/32 ÷ 13 3/4" TAILSTOCK Quill diameter: 75 mm Quill stroke: 220 mm Quill taper - Morse Taper No.: 5 DRIVES Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. 2920 kg

Sąlyga: naudotas, Technical Details: Grinding length: 12,000 mm Grinding width: 2,800 mm Bcjdswc A Snopfx Abfsu Workpiece height: 2,510 mm Max. workpiece weight: 24,000 kg Table surface: 11,990 x 2,500 mm Passage between columns: 2,820 mm Crossrail adjustment: 2,510 mm Table feed rate: 1 – 40 m/min Total power requirement: 110 kW Machine weight approx.: 151 t Space requirements approx.: 32.5 x 9 x 6.73 m The machine is in very good condition for high-precision grinding! In 2022, mechanical components were overhauled by WALDRICH COBURG at a cost of approx. EUR 600,000. Equipped with CNC control SIEMENS 840 D 1 universal grinding support, 22 kW Swiveling grinding spindle +/- 110° Peripheral grinding wheel dimensions: dia. 700 x 130 mm Vertical adjustment: 1,000 mm With dressing device 1 peripheral grinding support, 30 kW Grinding wheel dimensions: dia. 600 x 150 mm Vertical adjustment: 230 mm With dressing device Coolant and filtration unit Various grinding wheel mounts

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 000 mm, Y ašies eiga: 1 250 mm, Z ašies eigos atstumas: 650 mm, bendras ilgis: 6 500 mm, stalo ilgis: 2 000 mm, stalo plotis: 1 000 mm, bendras plotis: 3 600 mm, veleno greitis (maks.): 12 000 aps./min, bendras aukštis: 4 000 mm, bendras svoris: 14 000 kg, Įranga: sūkių greitis be galo kintamas, 2024 retrofitted milling machine CNC: TNC 530 HEIDENHAIN Distance between columns: 1250 mm Spindle: HSK 63 ELECTROSPINDLE 12,000 rpm Enclosure: INTEGRAL Bjdpfoul Txzjx Abfecu

Sąlyga: naudotas, Gamybos metai: 1995, tekinimo skersmuo virš slankiojančio stalo: 500 mm, Universal Lathe Make: ZMM Type: 500 Year: 1995 Technical Data Bodpfjwudhujx Abfscu Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Distance between centers: 1000 mm Swing diameter over bed: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolholder • Live center • Coolant pump • Machine lamp All information subject to change. A powered demonstration is possible at any time in our showroom.

Sąlyga: geras (naudotas), Gamybos metai: 1980, X ašies eiga: 1 985 mm, Y ašies eiga: 1 620 mm, Z ašies eigos atstumas: 1 330 mm, stalo apkrova: 10 000 kg, stalo ilgis: 1 700 mm, stalo plotis: 1 520 mm, including universal milling head including spindle extension including angle plate, height 1400 mm including digital readout system X-axis travel: 1985 mm Y-axis travel: 1620 mm Z-axis travel: 1330 mm W-axis travel: 410 mm Table length: 1700 mm Table width: 1520 mm Table load capacity: 10,000 kg Bcsdpfx Abowrn Imefou Spindle speed: 2.5 - 1000 rpm Tool holder: ISO 50 / ISO / BT / MK Length: 460 mm Width: 4800 mm Height: 6000 mm Weight: 25,000 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), stalo ilgis: 500 mm, stalo plotis: 300 mm, Surface grinding machine Ziersch Z35 - Demonstration machine, unused - Bcsdevvwf Djpfx Abfsu Grinding range: 500mm x 350mm Dresser Permanent magnet Belt filter system with magnetic separator