Įrankių šlifavimo mašina

WMW GOTHA SWU 250 III

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Control: Fanuc 21T Turning diameter: 158 mm Kwedpfx Ajwmzhpsf Iet Swing diameter over bed: 340 mm Spindle speed: 6,000 rpm 8-position turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Wide range of tool holders

Sąlyga: naujas, Gamybos metai: 2025, The drilling and milling machine can be used for drilling, reaming, and boring holes up to 45/40 mm in cast iron, as well as thread cutting of bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also suitable for cutting and face milling operations. The machine is available immediately from stock. Machine features This machine can be used for drilling, reaming, and boring holes up to 45/40 mm in cast iron, as well as thread cutting of bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also suitable for cutting and face milling operations. Various accessories can be mounted on the machine. HEAVY AND STABLE CAST IRON BODY MILLING HEAD HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN MASSIVE CROSS TABLE WITH PRECISION-GROUND SURFACE DOVETAIL GUIDES QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT SPINDLE ROTATION SWIVEL HEAD +/- 90 DEGREES ADJUSTABLE HEAD HEIGHT Optional machine base available – €200 Technical specifications MAXIMUM DRILLING CAPACITY: 45 mm MAXIMUM FACE MILLING: 80 mm MAXIMUM SLOT/FACE MILLING: 28 mm MAXIMUM THREAD CUTTING: 12 mm QUILL TRAVEL: 120 mm SPINDLE TAPER: MT4 SPINDLE SPEEDS (6 MOTOR SPEEDS / 1400 rpm): 95, 170, 280, 540, 960, 1600 min⁻¹ MAX. DISTANCE SPINDLE NOSE TO TABLE: 475 mm DISTANCE SPINDLE TO COLUMN: 260 mm WORKTABLE DIMENSIONS: 820 x 240 mm TABLE TRAVEL: 550 x 170 mm MOTOR: 1.1 kW / 1.5 HP VOLTAGE (two options): 400V (three-phase motor) PACKING DIMENSIONS: 1140 x 800 x 1040 mm Kedjud H Huopfx Af Iowt NET WEIGHT: 270 kg Available equipment MK4/B18 drill chuck arbor Service tools 3–16 mm/B18 drill chuck MK4/MK3 reduction sleeve MK3/MK2 reduction sleeve Polish-language operating manual

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, 1.0 pc used injection molding machine Manufacturer: ENGEL Model: VICTORY 200/28 TECH Year: 2007 Clamping force: 28 tons Tie bar distance: TIE-BAR-LESS Screw diameter: 25 mm Max. shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Kodeu Eu Tnspfx Af Iswt Equipment: - 1 x core pull

Sąlyga: labai geros būklės (naudotas), The SB-10 grinding machine enables precise grinding of boring bars, threading tools, grooving tools, or boring bar steels in HSS or carbide for jig boring machines or lathes. By applying the correct rake angle adapted to the respective material, you achieve optimal efficiency and longer tool life. Nowadays, these boring bar tools are mostly ground by hand before being used on high-quality machine tools. On the SB-10, steels are ground with a profile-grinding wheel mounted on the circumference. The profile is easily achieved using a dressing diamond and a template attached to the machine. For excellent stability and surface finish, the horizontal slide is mounted on cross-roller guideways. Grinding wheel (ØxWxB): 125 x 20 x 20 mm Speed: 2800 rpm Longitudinal adjustment: 130 mm Cross adjustment: 80 mm Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions (WxDxH): approx. 550 x 450 x 650 mm Weight: approx. 70 kg Kwjdpfsfqicxsx Af Ijt

Gamybos metai: 1987, Sąlyga: paruoštas naudoti (naudotas), Centre distance: 400-800 mm, Spindle speed: 1000-2700 rpm, Workpiece diameter: 10-300 mm, Grinding wheel diameter: 40-300 mm, Swivel angle: -45 to 45°, Length: 3000 mm, Width: 2500 mm, Height: 2275 mm, with oil mist extraction unit from Hoffmann (new filter inserts), Faudi gravity band filter unit, hydraulic power unit, additional grinding head for grinding worm gears, grinding arbors diameter 50, 40, 27, 22, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, electrical diagrams in paper form, inspection possible. Kjdpsrgahxefx Af Iowt

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. Kwedpfx Aoqt Dmyof Ijt According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, EMCOturn E45 CNC tekinimo staklės su C ašimi Pagaminimo metai: 2011 Tekinimo skersmuo 220 mm Tekinimo ilgis 310 mm Valdymas Siemens 828D Tekinimo skersmuo virš lovos 430 mm Veleno skylė 45 mm Veleno sukimosi greitis 6 300 aps./min X eiga 160 mm Z eiga 310 mm Įrankių pozicijų skaičius 12 C ašis Varomieji įrankiai Bendra galia 17 kW Transportavimo matmenys apie 3,3 x 1,5 x 1,95 m Masė apie 3 300 kg Priedai / pasirinkimai: - C ašis ir varomieji įrankiai - Varomų įrankių laikikliai ašiniai ir radialiniai - Stacionarūs įrankių laikikliai - Dokumentacija - Atsarginė kopija - Kojinis pedalas - Galinis centravimo įtaisas (tarpinis centras) - Detalių gaudyklė - 3 žandikaulių hidraulinis griebtuvai - Aušinimo skysčio talpa Kwedpfx Aoxvcrxjf Ist Darbo valandos: 8173 Prijungta prie elektros mūsų sandėlyje!

Sąlyga: naujas, Gamybos metai: 2023, Oscillating sanders are designed for sanding straight, curved, and shaped pieces with round or oval cross-sections, etc., and with variable thicknesses, suitable for chairs, tables, beds, and related items. Kwedpoqnufvjfx Af Iet The main features of the machine are: frame made of electro-welded steel; rotating disc with two counter-rotating sanding belts driven by an electric motor, with rotational movement around the workpiece; electric control panel; two adjustable workbenches (infeed – outfeed); possibility of fitting two automatic workpiece feed units with adjustable speed via inverter. Sanding belts: 80 x 1260 mm Minimum / Maximum workpiece diameter: 10–100 mm (ø) Minimum bending radius: 200 mm Dimensions: 760 x 1000 x 1800 mm 3 units Camam, Comec, OMEF, Brusa di Garboli

Sąlyga: naudotas, Gamybos metai: 2006, Offer, subject to prior sale: 1 used vertical machining center Make: Hurco Model: VM1 Serial number: H-V12319 Year of manufacture: 200 Control: ULTIMAX 4 Table dimensions: 762 x 356 mm X-axis travel: 660 mm Kwjdpowl H Rmefx Af Iet Y-axis travel: 356 mm Z-axis travel: 456 mm Spindle speed range: 10 – 10,000 rpm Tool changer: 20-station Taper: SK40 Rapid traverse (X/Y/Z): 28 m/min Drive power: 11 kW Space requirements (LxWxH): 2,000 x 1,800 x 2,600 mm Weight: approx. 2,900 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Kjdpfjurw Uyjx Af Iewt Grinding length: 620 mm Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): 1x Workpiece headstock MK5 1x Operator panel 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) - Separate low speed for part alignment