Drymax C30 - 30- P

WITTMANN

Sąlyga: naudotas, Gamybos metai: 2017, Ser.-No. 141342-100, Control system type Unilog B8, Clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mold installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mold weight 1,800 kg, min. mold dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection/metering unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2020, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 15,564. Nwjdsyc Symopfx Af Nob This lot is part of an online auction. Award of contract subject to the approval of the client.

Gamybos metai: 2020, Sąlyga: visiškai atnaujintas (naudotas), 2 semi-gantry cranes for indoor operation extendable to full gantry crane span approx. 8.5 m hook travel approx. 6.0 m Njdpomdrt Ssfx Af Nowb DEMAG single-girder trolley floor control

Sąlyga: naudotas, Gamybos metai: 2017, Serial no. 140228-100, Control system: Unilog B8, Clamping force: 1,800 kN, clear tie bar distance: 570 x 520 mm, mold height: 225 - 550 mm, opening stroke: 480 mm, max. daylight between platens: 1,030 mm, ejector stroke hydraulic/electric: 180/160 mm, ejector force: 40 kN, dry cycle time: 1.7 s per 364 mm, max. mold weight: 1,800 kg, min. mold dimensions: 346 x 346 mm, Injection unit: type 750, screw diameter: 45 mm, screw stroke: 200 - 225 mm, L/D ratio: 22, 2 hydraulic core pulls, calculated shot volume: 193 - 442 cm³, specific injection pressure: 1,714 - 3,000 bar, max. screw speed: 325 rpm, screw torque: 900 Nm, nozzle stroke/nozzle force: 350 mm/40 kN, Injection/dosing unit: manufacturer Wittmann, type Feedmax S3-NET, year 2017, Sprue picker/robot: manufacturer Wittmann, type WP80, year 2021, travel distances X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: manufacturer Metabo, type SA250, length 25 m, machine weight: 7,200 kg, operating hours: 17,844 This item is part of an online auction. Nsdjyc Stajpfx Af Newb Award is subject to the approval of the client.

Sąlyga: naudotas, Gamybos metai: 2017, Ser. No. 138524-100, Control system, type Unilog B8, clamping force 1,100 kN, clear tie bar spacing 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, min. mould dimensions 296 x 296 mm, injection unit type 350, screw diameter 25 mm, screw stroke 175 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 85.9 - 220 cm³, specific injection pressure 1,595 - 3,000 bar, max. screw speed 350 rpm, screw torque 340 - 500 Nm, nozzle stroke/nozzle force 250 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2018, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, L 25 m, machine weight 4,800 kg, operating hours 42,853 This item is part of an online auction. The sale is subject to the approval of the seller. Njdpfxjyc Sqxs Af Njwb

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 83 000 h, spaudimo jėga: 350 kN, varžto skersmuo: 25 mm, For sale is an injection moulding machine by Arburg, model 320S 350-60. Year of manufacture: 2000 Automatic operating hours: 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request, at an additional cost. Price incl. VAT Nwodpfjhhuq Asx Af Nsb Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Sąlyga: naudotas, Gamybos metai: 2017, Ser.-No. 138522-100, Control system: Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke hydraulic/electric: 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimensions: 296 x 296 mm, Injection unit type: 750, Screw diameter: 35 mm, Screw stroke: 200 - 225 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 193 - 442 cm³, Specific injection pressure: 1,714 - 3,000 bar, Maximum screw speed: 325 rpm, Screw torque: 900 Nm, Nozzle stroke/force: 350 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Model Feedmax S3-NET, Year 2021. Sprue picker/robot: Manufacturer Wittmann, Model WP80, Year 2021, Travel axes X/Y/Z: 100 x 550 mm x 90°. Compressed air hose reel: Manufacturer Metabo, Model SA250, Length 25 m. Machine weight: 5,200 kg, Operating hours: 36,180. Nsdeyc Snkjpfx Af Nowb This item is part of an online auction. The final bid is subject to seller approval.

Sąlyga: naudotas, Gamybos metai: 2017, Ser.-No. 138264-100, control system, type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould size 346 x 346 mm, injection unit, type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, dosing unit, manufacturer Movacolor, injection/dosing unit, manufacturer Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot, manufacturer Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel, manufacturer Metabo, type SA250, L 25 m, machine weight 7,200 kg, operating hours 46,038. Njdpfsyc Sh Dex Af Njwb This item is part of an online auction. Sale is subject to the approval of the owner.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, Used injection moulding machine direct from the manufacturer! As the manufacturer KraussMaffei, we offer one of our pre-owned injection moulding machines for sale here. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5000 kN - Distance between tie bars (h x v): 900 x 800 mm - Maximum mould opening distance: 1170 mm - Minimum mould installation height: 480 mm - Opening stroke of platen: 1650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (reverse: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical parameters - Pump connected load: 90 kW - Heating capacity: 44 kW Weight & Dimensions - Net weight: 25.8 t Nwodonh Rnuopfx Af Njb - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As standard, we supply this machine in fully functional, basic condition. Additionally, as the original manufacturer, we can provide various options depending on individual requirements, such as: - Energy optimisation upgrades - Possible integration with KraussMaffei digital products - Plasticising unit conversions - Optional: organisation and handling of delivery (not included in the price) - Optional: setup and commissioning (not included in the price) With us, you benefit from first-class service and also have the option to purchase desired spare part packages for wear parts—ensuring seamless production with your newly acquired used machine. Don’t hesitate to get in touch with your enquiry today!

Sąlyga: labai geros būklės (naudotas), Gamintojas: WITTMANN Modelis: W818-8339 Pagaminimo metai: 2016 Įrenginio tipas: Surinkimo sistema / manipuliatorius (removal system) Judesio diapazonas (X / Y / Z): X: 420 mm Y: 1 200 mm Z: 1 500 mm Nodpfx Aox Eiufjf Nowb Įranga: Saugos įtaisai

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Wittmann Battenfeld EcoPower 110/350 with Wittmann W818 Robot / All-Electric Injection Moulding Machine / Operating Hours: approx. 16,000 in automatic mode Year of Manufacture: 2017 Injection Unit: Nsdpsyctdyefx Af Nswb Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Metering volume: 169 ccm Clamping Unit: Clamping force: 110 t Tie bar spacing: 470x420 mm Platen size: 680x660 mm Ejector: electric Clamping mechanism: toggle lever Control: UNILOG B8 – Touchscreen Additional Equipment: - Excellent technical condition - All-electric machine: high-speed, energy-efficient, and very quiet - Operating hours: approx. 16,000 in automatic mode - Euromap 67 - Robot interface - Control with pneumatic valve - Hydraulic core pull x 1 - Hot runner control - Injection unit is wear-resistant and corrosion-proof - Central lubrication - Automatic mold height adjustment - Parallel movements - The machine has been serviced in Germany Wittmann W818 Robot Year of Manufacture: 2015 4-axis robot: 3 axes are electrically driven by servo motors; C-axis – pneumatic Travel distances by axis: X-420, Y-1200, Z-2000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91x1.42x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Gamybos metai: 1999, Sąlyga: labai geros būklės (naudotas), INJECTION MOLDING MACHINE KRAUSS-MAFFEI 150-700 C1 Year: 1999 Nedpfeh S Dncjx Af Nswb Screw diameter: 55 mm In excellent condition, still in operation

Gamybos metai: 2019, veikimo valandos: 21 800 h, Sąlyga: paruoštas naudoti (naudotas), valdiklių gamintojas: BATTENFELD, valdiklio modelis: UNILOG B8, varžto skersmuo: 35 mm, Šis WITTMANN Battenfeld EcoPower 110/350 buvo pagamintas 2019 m. Tai tvirta elektrinė įpurškimo mašina, kurios sraigto skersmuo Ø35 mm, o įpurškimo tūris - 168 cm³. Su 470 x 420 mm atstumu tarp kaklaraiščio strypų šiuo metu ji gamina su polistirenu. Bendras darbo valandų skaičius yra maždaug 21800, išlaikoma labai gera techninė būklė. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. • Injekcijos tūris: 168 cm³ • Atstumas tarp kaklaraiščio strypų: 470 x 420 mm • Gyslų skaičius: 1 šerdis • GK: x4 • Iš viso darbo valandų: apie 21 800 val. • Šiuo metu gaminama mašina: Taip • Medžiaga: Medžiaga: polistirenas (PS) • Techninė būklė: Labai gera techninė būklė Nwedpfx Afjyca Ske Nob

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, konvejerio juostos ilgis: 3 100 mm, konvejerio juostos plotis: 400 mm, bendras ilgis: 3 100 mm, bendras plotis: 550 mm, bendras aukštis: 900 mm, bendras svoris: 80 kg, galia: 0,18 kW (0,24 AG), įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, įėjimo srovė: 3 A, Įranga: Tipinė plokštelė prieinama, Aliumininis transporterio konvejeris 310 x 40 cm, 8 m/min, rūšiavimo juosta Parduodamas mobilus horizontalus aliuminio transporterio konvejeris puikios būklės Ilgis: 3100 mm Juostos plotis: 400 mm Bendras plotis: 480 mm Greiitis: 8 m/min Pavaros variklis: 0,18 kW, 50 Hz, 380/220 V Juostos medžiaga: žalia guminė tekstilė Rėmo medžiaga: aliuminio profilis Nwodpfxjydp Tgj Af Njb Aukštis: 820 mm, reguliuojamos/palenkiamos kojelės Su stabdžiu ratais

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Demag Ergotech - System 250/280-80 Clamping force: 25 tons Screw diameter: 25 mm Year of manufacture: 2003 Sprue picker 2 units Nwodpfxohrw Amo Af Nob

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Ašių skaičius: 3 Nodpfx Aswnfmfef Newb X: 1500 mm Y: 2600 mm Z: 4000 mm +C ašis pneumatinė Darbinis diapazonas: 4000 mm Naudingoji apkrova: 41 kg