Kombinuotos diskinio pjovimo ir frezavimo staklės

WINTER KSF-315-2600

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum power in this class Very quiet Application Area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a matching extraction port diameter Can also be used for several dust sources High-quality, well-conceived construction Robust and compact housing made of galvanized sheet metal Extraction port can be easily converted from left to right, allowing for flexible use Large access openings for maintenance Large, mobile chip containers with clamping lever and chip collection bag Unit delivered fully assembled, ready for immediate use Mobile Filter Description: Ultra-compact with maximum filter surface area Filter media made of polyester fleece, aluminum vapor-coated, washable for extended service life Filters are standard in antistatic design, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning light on control panel The fan is positioned downstream of the filter Equipment Features: With innovative locking device for safe container positioning All units in this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Access opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter 2 fixed casters and 2 swivel casters with brakes Pre-wired for connecting machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure damper available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Rated airflow: 1095 m³/h Max. airflow: Negative pressure at rated airflow: Filter surface: 5.31 m² Nwsdpfx Ajcnw U Def Nob Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 74-4-10, Panel saw ALTENDORF F90, year of manufacture 1974 Machine No.: 74-4-10 Manufacturer: Altendorf, Germany Njdpfsipvrbox Af Nswb Saw length (mm): 2600 Cutting width (mm): 1300 Max. cutting height (mm): 130 Max. saw blade diameter: 400 mm Main motor: 5.5 kW With scoring unit 4 speed settings Manual saw blade height adjustment Approx. weight (kg): 780 Technical data subject to change

Sąlyga: naudotas, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressure 2 kg/cm² Heating: 2 x 1.8 kW - Long belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Maximum saw blade diameter 250 mm With chain feed - Extraction unit for sanding machine and saw Nwsdsxl Ha Sepfx Af Neb 0.55 kW Airflow approx. 11 m³/min Push-button control with main and emergency stop switches Machine mounted on chassis Installation footprint (according to manufacturer): 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “sold as seen”. Payment terms: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex stock

Sąlyga: naudotas, Gamybos metai: 1981, Atstumas tarp centrų: 1300 mm Kopijavimo ilgis: 1250 mm Centro aukštis nuo staklių pagrindo: 250 mm Centro aukštis virš atramos: 160 mm Pastumos greitis: 3 m/min Svoris: 630 kg Sukimosi greičiai: 500-1000-1500-3000-2100-4200 aps./min Hidraulinė Sandėliavimo vieta: Nattheimas Nodsvvkt Iepfx Af Nowb

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, I am selling a combination machine panel saw with scorer + spindle moulder. Manufacturer: FELDER Austria Model: KF700S. Year of manufacture: 2011. Cutting length: 3200 mm. Saw blade and moulder tilting 0-45° manual Saw blade and moulder height adjustment digital Digital display for rip fence and working height Activation of main saw blade and scorer via aluminium sliding table. Nwsdpfx Ajr Alzpof Njb Main motor panel saw: 3.0 kW (3200/4500/5800 rpm adjustable) Scorer motor panel saw: 0.75 kW Main motor spindle moulder: 5.5 kW Tools, options, and accessories shown in the pictures included in the price. Very good condition. Available immediately. Includes full documentation and CE certificate.

Sąlyga: geras (naudotas), Gamybos metai: 1990, pjovimo plotis (maks.): 1 000 mm, pjovimo aukštis (maks.): 140 mm, stalo ilgis: 1 400 mm, galia: 5,5 kW (7,48 AG), Types: F 45, Machine no.: 90-8-86 Nedpfstxh Nijx Af Newb

Sąlyga: naujas, Gamybos metai: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodised aluminium sliding table Robust steel and cast iron construction Large supporting surface and precise cast iron table High-precision format sliding table made of anodised aluminium (travel 2250 mm) Large crosscut frame (900 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm, fitted with professional flip-over stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Stable saw unit and large double trunnion spindle moulder unit for maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-relieved cast iron Three manually adjustable spindle speeds, 3500-10000 rpm Spindle moulder with right/left rotation Standard supplied hood guard for curved work Safety reversing aluminium fence jaws Two powerful motors with high power reserves Two plug-in handwheels for quick and convenient operation Dimensions and Weights Weight approx. 470 kg Extraction Connection Extraction nozzle diameter: 2 x 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Electrical Data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Network frequency: 50 Hz Spindle Moulder Spindle tilt: 0 to -45° Usable spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter non-retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular Saw Unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 2660 mm Saw blade tilt: 90-45° Max. cutting height 90°: 90 mm Max. cutting height 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 78 mm Nwsdehp Rdlspfx Af Neb (Main) saw blade diameter: 315 mm (Main) saw blade diameter explained: independent of scorer (Main) saw blade speed: 4000 rpm Sliding Table and Table Table length: 1112 mm Table width: 430 mm Scope of delivery: Hood guard for curved work Anodised aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2022, veikimo valandos: 1 h, mašinos/transporto priemonės numeris: 268955558, GREMAC e1 Trommel Screening Plant Tandem Chassis / Axles - 2x kg (gross vehicle weight rating) - kg unladen weight without power unit - Overrun brake - Vehicle lighting in accordance with StVZO - TÜV approval Drum - Length: mm - Diameter: mm - 4.0 kW electric drive - Speed adjustable via frequency converter - Lifting screw - Adjustable cleaning brush Hopper with conveyor belt - Rubber belt with chevron profile Nsdpfsl Hbcfsx Af Nowb - 0.75 kW electric drive - Speed adjustable via frequency converter Fine Material Collection Belt - Movable suspension - Smooth rubber belt - 1.5 kW electric drive - Speed adjustable via frequency converter Fine Material Belt - Movable suspension - Rubber belt with chevron profile - 2.2 kW electric drive - Speed adjustable via frequency converter - 25° incline - Manual cable winch for angle adjustment Oversize Material Stockpile Conveyor - Movable suspension - Rubber belt with chevron profile - 1.5 kW electric drive - Speed adjustable via frequency converter - 25° incline - Manual cable winch for angle adjustment Control System - Siemens Logo PLC - Control panel with buttons and potentiometers - 400V power circuit - 24V control circuit - Main switch - Ceekon 16A socket - Emergency stop relay - Without generator Cladding - Hot-dip galvanized frame components - Painted drum - Cladding powder-coated in RAL7005 and 5018 Additional Information Application: Construction General Condition: Very good Technical Condition: Very good Optical Condition: Very good Delivery Terms: EXW (Ex Works)

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW Nwodpfxorigxys Af Nob - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Sąlyga: naujas, Holzkraft minimax t 45c spindle moulder (5502044) Affordable, with fixed spindle and cast iron worktable. - Robust steel and cast iron construction - Equipped with fixed spindle - 3 spindle speeds from 3500 to 10000 rpm - Spindle with forward/reverse rotation - Large dimension cast iron milling unit, mounted directly on the table - Extraction hood below the worktable for improved dust extraction - Solid and precise cast iron table - Fast and effortless speed change - Powerful 5.0 kW motor Nodpskyt Ulefx Af Nowb - Standard supplied curved guard cover - Quality Made in Italy Equipment Details Cast iron milling unit - Mounted directly to the table - Spindle supported high up with precision ball bearings, resulting in minimal bearing load and maximum service life - 3 milling speeds from 3500 to 10000 rpm Powerful Motors - Fitted with high-performance three-phase motor Spindle Guard The standard spindle guard is equipped with a height-adjustable guide rail and protective plate for maximum safety as standard. Spindle Fence - Precise fence with quick adjustment and fine adjustment via scale on the fence jaw - Integrated extraction port ensures clear visibility Table Opening - Large table opening also allows the use of larger raised panel cutters and tenoning or slotting tools both above and below the table Curved Guard Cover - Included as standard Reversible Fence Jaws - Versatile fence for bridging the tool gap - Enables safe operation even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimal protection on any spindle moulder, individually adjustable for any task - Universal base elements for mounting AIGNER safety and work devices - Quick adjustment by simultaneous clamping of all individually movable bars - High-quality aluminium construction - Universally usable on all HOLZKRAFT spindle moulders - 500 mm: Art. No. 5851000 - 650 mm: Art. No. 5851650 TECHNICAL DATA Dimensions and Weights Weight (Net) approx.: 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Working Table Table length: 1000 mm Table width: 575 mm Table height: 900 mm Installation Details Required floor space length: 1945 mm Required floor space width/depth: 920 mm Note on required space: The dimensions take into account maximum working ranges or usable lengths. Machine body length: 1000 mm Machine body width/depth: 575 mm Working area length: 1600 mm Working area width/depth: 1600 mm Note on working area: Add the indicated measurements to the required floor space for the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Supply frequency: 50 Hz Main drive motor output: 5.0 kW Spindle Usable spindle length: 100 mm Max. spindle projection above table: 130 mm Spindle speed(s): 3500/7000/10000 rpm Spindle shaft diameter: 30 mm Milling Tool Max. Diameter Max. diameter (retractable): 180 mm Max. profiling diameter: 210 mm SCOPE OF DELIVERY - Curved guard cover - Aluminium fence jaws Holzkraft specialist dealer – accessories available on request!