Klijų barstytuvas

WINTER GLUEMAX SINGLE B-400

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Gtedpfxsi Hpk Ue Adpet Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Sąlyga: naudotas, Gamybos metai: 2004, Kompaktiška pusiau automatinė dantytų jungčių linija, sudaryta iš: - Frezaus PJ 150/500 Gtjdpow Nbacjfx Adpst - Perdavimų stalo rankiniam perdavimui - Vieno kanalo preso PJ 7/6100 li Frezaus: 2 pakeliai/min Presas: 2 ciklai/min Įeinantis ilgis: 150–700 mm Galutinis ilgis: maks. 6 100 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, We offer you the following: Deburring Machine Manufacturer: Viet Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical Data and Features: - Abrasive belt change on the left side of the machine - Tool kit - Digital thickness display - Material at the infeed too strong - Electro-pneumatic control of oscillation - Air filter with condensate separator and automatic drain - Maintenance-free pneumatic system - Pneumatic lifting and lowering of units when switching aggregates on or off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extension at front and rear, each with 1 roller - Industry 4.0 (LAN) package with network LAN connection - Working width: 1350 mm - Machine with movable head - Centesimal stroke system with inverter - Usable working height 160 mm - LED lighting inside the machine - Electronic belt control for longitudinal units - Calibration sanding unit with sanding roller, diameter 190 mm, belt length 2620 mm - Electromechanical grit setting - The frequency converter allows adjustment of the sanding belt speed - V-Spin unit with 15-disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving counter-rotating to each other. By combining these two movements, the V-Spin unit is suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm, Scotchbrite + abrasives, grit size 80 Gtodpfx Adjv Hxrgepot - 16 backing pads for V-Spin units, diameter 80 mm, Tampico + grit size 80 - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads, each head containing 3 pads of rotating sanding brushes, diameter 123 mm. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP), speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 Shore, smooth surface - Belt cleaning blower for conveyor carpet, incl. vacuum extraction - IPC MONITOR 15" touch-screen control for operating the machine, up to max. 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of up to 1000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual signal when machine operation starts - Operating hours counter - Automatic control of feed speed depending on processing performance (expressed in sqm). This enables, based on statistic data, a longer service life of the sanding belt. The machine is in very good condition and comes with 2 Euro pallets of new sanding belts. Accessories, tools and clamping devices shown are only included in the scope of delivery if mentioned in the additional information. Technical specifications and details may be subject to change and errors. Subject to prior sale!

Sąlyga: geras (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 94323, X ašies eiga: 3 060 mm, Y ašies eiga: 1 260 mm, Z ašies eigos atstumas: 150 mm, bendras aukštis: 2 400 mm, bendras ilgis: 4 400 mm, bendras plotis: 2 800 mm, bendras svoris: 3 130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC Machining Center Fully operational, available for inspection in Wadowice. X-axis travel: 3060 mm Gtsdpfowpthtjx Adpot Y-axis travel: 1260 mm Z-axis travel: 150 mm CNC control type: XP 600

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Gedpfxjw Sy T Ho Adpott Location: Nattheim

Sąlyga: naujas, Gamybos metai: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. material passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Electrical connection: 400 V / 50 Hz / 3-phase Gtsdpfsu I R Utsx Adpot Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea formaldehyde (UF), and polyurethane adhesives, suitable for various material types such as MDF, multiplex, chipboard, composite panels, and gypsum plasterboards. This type of glue application machine allows precise and homogeneous dosing of adhesive, taking into account the roller profile, which must suit the production requirements. The heavy-duty frame and the core of the rollers—which are manufactured thicker than previous models—allow for a high production rate without special issues, enabling bonding of workpieces up to 2,200 mm in width. Roller removal for maintenance is straightforward due to the support system, which can be split in half via a simple bayonet coupling. The machine can be optionally equipped with various accessories such as an electronic speed controller, automatic roller cleaning device, and automatic upper roller lifting system with digital position display. The S4R/P glue application machine is suitable for various production purposes, including in the construction sector and for manufacturing foam panels and mattresses. Features: - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400 x 3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400 x 3000 mm, disc rollers, Ø 122 mm, stainless steel Location: Available ex-stock 54634 Bitburg - Immediately available -

Sąlyga: reikia remonto (naudotas), Gamybos metai: 1993, mašinos/transporto priemonės numeris: 624/9, spaudimo jėga: 10 t, darbinio aukščio: 805 mm, bendras ilgis: 1 900 mm, Taktinė presas dantytoms jungtims Dantytų jungčių presas Spaudimo jėga 10 t Medienos plotis 80-300 mm Medienos storis 18-80 mm PAPILDOMAI Gedpst Sc T Iefx Adpstt su hidrauliniu agregatu

Sąlyga: reikia remonto (naudotas), Keilzinken įranga dimter HK 400 Keilzinken linija medienos paketams Medienos įleidimo ilgiai: 800–6000 mm Gtsdpevi Hw Nofx Adpst Frezavimo aukštis: 285 mm (300 mm) Spalva: mėlyna Reikalauja remonto, parduodama dabartinėje būsenoje Įranga jau išmontuota ir sandėliuojama Achern mieste Daug medžiagos už mažą kainą Visi techniniai dokumentai yra prieinami Taip pat suteiksime techninę pagalbą ir atsakysime į visus Jūsų klausimus

Gamybos metai: 1990, Sąlyga: geras (naudotas), I am selling a MAKA turret manufacturing machine. Year of manufacture: 1990 Combined oscillating long-hole boring machine and drilling machine. Godpfegiwl Djx Adpstt Available for immediate sale.

Sąlyga: geras (naudotas), The machine has been overhauled many new parts new wiring new hydraulic station The machine has been inspected and is fully functional. Gsdpfx Adev Ihdzjpett We can provide a video.