Kaiščių gręžimo staklės

WINTER BOHRMAX 21 DUO

Būklė: naudotas, Gamybos metai: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" – complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal: clamping – drilling – releasing; electrical intermittent operation. - Automatic retraction of the drilling unit upon reaching the preset drilling depth. - Automatic extension of drilling depth for face-end drilling. This eliminates the need to manually adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, drilling depth flat face 14 mm, drilling depth end face 24 mm). - 1 drilling beam with 21 spindles, 32 mm spacing, 1.5 kW motor (drilling feed 0–70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping carriage adjustable along the Y-axis, with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal positioning system comprising: - 1 positioning rail, 1800 mm, for shelf drilling (aluminum profile 40 x 40 mm) with 3 flip stops - With quick-change system, easily convertible from right to left for mirrored shelf drilling in carcass construction. Also suitable for line boring in System 32. Iodpfx Aoxnlfljateid - Side stops and position settings, as well as the drilling height adjustment over the support table, using mechanical digital counters. - Side stops are easily swung out for the shortest possible changeover times between carcass, frame, and line boring operations. - Clamping arms for the clamping carriage are designed for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. - 1 set of dowel drill bits: - 5 tungsten carbide dowel drill bits, Ø 8 x 77 mm, right-hand - 4 tungsten carbide dowel drill bits, Ø 8 x 77 mm, left-hand Base machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" as above. Additional features: - Suction funnel, dust-tested, Ø 120 mm - 1 set for line boring in system

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Maszyna do osadzania kołków z pistoletem operacyjnym do jednoczesnego nakładania kleju i wprowadzania kołków. Standardowe kołki Ø8 mm Długość kołków: 25–80 mm Nominalna wydajność: 1 kołek/sekundę (wraz z aplikacją kleju) Stosuje kleje PVA na bazie dyspersji wodnej o lepkości 200–400 mPa 1 szt. zbiornik na klej o pojemności 8 kg 1 szt. zbiornik na wodę o pojemności 8 kg Isdpequ N U Dsfx Aatjid Maksymalne ciśnienie: 5 bar

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Point-to-point CNC drilling machine MASTERWOOD SPEEDY 207 used machine for custom-made furniture production, kitchen furniture, bathroom furniture, and various applications Drilling head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with a drilling capacity of 1390 x 750 mm and two lateral elevating stops controlled by the control unit, enabling the processing of panels up to 2800 x 750 mm with just one program and an intermediate stop Capability to drill panels up to 2800 mm length Pneumatic tool displacement 60 mm Max. panel thickness 50 mm Spindle speed 4,500 rpm Iisdpswd Irvjfx Aated Saw rotation speed 6,000 rpm Vacuum pump motor 1.5 HP Suction cup diameter 80 mm Front stop equipped with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control unit with interactive graphical programming, 9-inch display, drilling programs, working cycle optimization, graphical, parametric, and diagnostic modes Overall dimensions – machine: 2500 x 1800 x 1800 h mm – Weight 850 kg Overall dimensions – control panel: 800 x 520 x 1200 mm – Weight 120 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022,

Būklė: naudotas, Gamybos metai: 2016, bendras ilgis: 6 400 mm, bendras plotis: 1 500 mm, bendras aukštis: 1 700 mm, Kaina: pagal užklausimą Iedpfeyvh Rvsx Aatsid - Pagaminimo metai: 2016 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Maksimali pjovimo ilgis [mm]: 3200 - Min. pjūklo disko skersmuo [mm]: 300 - Maks. pjūklo disko skersmuo [mm]: 350 - Pjūklo disko skylės skersmuo [mm]: 30 - Dulkių nutraukimo angos skersmuo [mm]: 120 - Veleno apsisukimai: - Maks. veleno apsisukimai [aps./min]: 4000 - Įtampa [V]: 400 - Srovės suvartojimas [A]: 18,5 - Saugiklis [A]: 25 - Transportavimo matmenys: 6400mm x 1500mm x 1700mm (ilgis x plotis x aukštis) - Transporto pakuotės [vnt.]: 2 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumas: PVM atskaitomas įmonėms Pristatymas ir mainai galimi bet kada visiems pramonės sektoriaus įrenginiams Yorick Diebels

Būklė: naudotas, Gamybos metai: 1995, mašinos/transporto priemonės numeris: 9511/5376, ruošinio aukštis (maks.): 40 mm, darbinis plotis: 1 200 mm, ašies skaičius: 1, stalo plotis: 1 300 mm, stalo aukštis: 900 mm, darbinio aukščio: 900 mm, slėgis: 6 juosta, ruošinio plotis (maks.): 1 200 mm, KOCH drilling and dowel insertion machine Type SPRINT PTP Workpiece Dimensions Workpiece length (Y): 100 - 800 mm Workpiece width (X): 20 - 1200 mm Workpiece thickness (Z): 10 - 40 mm Machine Equipment · Horizontal drilling station with one drill spindle - Drill chuck Ø 10 mm Iedpfx Aorc A Nwjateid - Dowel hole blow-out and extraction · Glue application and dowel insertion station with a dowel tool DW34 for dowels Ø 8mm - Electronic glue monitoring ELC · Vibratory feeder · 1:1 glue pump · Workpiece support table, 1300 mm wide · One stop each on the left and right · Mechanical digital displays for height adjustment (workpiece thickness) · PC positioning control

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Dowel Hole Boring and Insertion Machine SCHEER BS 5102-V The BS 5102-V is a high-performance, electronically controlled machine for precise and efficient end-grain drilling as well as the accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust tested Main Technical Data & Equipment: Workpiece width: min. 60 mm / max. 1200 mm (pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical support stroke: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 membrane pump, max. 7 bar Glue tank: Spiral conveyor, 3.5 liter capacity Extraction port: Ø 80 mm | Extraction air volume: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angled clamping Power supply: 400 V, 50 Hz Machine Structure & Operator Comfort: Controlled X-axis with machine stand as a workpiece support X-support with linear guide and rack-and-pinion drive Iedpfx Aeunvg Teatjid Servo drive for the feed system Clamping portal with 4 adjustable clamping cylinders – controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection adjustable directly on the support Residual Cut-Off Device & Safety Systems: Protective hood interlock Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC control Operating interface: WP-Studio – dialog-based programming Operating system: Windows 10 Display: 17" color screen Separate workpiece programs for left & right control panel (mirrored) Glue quantity individually definable per program Networkable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: guarantees controlled glue flow Additional drilling unit for surface drilling: Drill motor: 1.5 kW at 18,000 rpm Drill feed: pneumatic Drill stroke: max. 25 mm Depth limiter: via spindle & SIKO display Drill distance to reference edge: 5 – 35 mm Mounting: M10 external, max. Ø 35 mm Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines – that's why you receive a 7-year warranty on the machine construction, especially on the supporting frame and guide mechanism. Electrical supply parts as well as regular wear parts are excluded. Additionally, we grant a 1-year warranty on the complete machine (incl. control system, hydraulics, pneumatics etc.). Conclusion: This machine combines state-of-the-art control technology, high build quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for a tailor-made offer or to arrange a demonstration appointment. Machine available from stock. Delivery, commissioning, and training optionally available.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, pjūklo disko greitis: 4 000 aps./min, Skydinis pjūklas pagamintas 2020 m. Šio "FIMAL concept 350" pjūklo ilgis 3200 mm, o pjūklo skersmuo - nuo 300 iki 350 mm. Jis veikia 4000 apsisukimų per minutę peilių sukimosi greičiu, o pagrindinio variklio galia - 7,5 AG. Jei norite gauti aukštos kokybės pjovimo pajėgumus, apsvarstykite mūsų parduodamas FIMAL concept 350 stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Modelis: Concept 350 - 3200 Iiedey Dc Daepfx Aatod • Kvadratinis ilgis: 3200 mm • Ašmenų skersmuo: 300-350 mm • Peilio vidinė anga: 30 mm • Ašmenų iškyša (90°): 100 mm (75 mm) • Geležtės iškyša (45°): 67 mm (45 mm) • Geležtės sukimosi greitis: 4000 aps./min. • Peilių grupės greitis (inverteris): 40 m/min • Pagrindinio variklio galia: 7,5 AG (5,5 kW) • Ištraukimo anga: 120 / 100 mm • Ištraukiamo oro kiekis: 1800 m³/h • Ištraukiamo oro greitis: 25 m/s • Darbinis slėgis: 7 bar • Oro sąnaudos: 85 l/h

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, Painting/Spraying Booth Ijdpfoia Ta Aox Aatjid This Reinox 219×235 painting/spraying booth is designed for efficient operation in small to medium-sized workshops. It is suitable for use in potentially explosive atmospheres (EX / ATEX certification). Equipped with a high-performance fan and a three-stage filtration system, it provides a clean and safe working environment, even with regular use. !! Always supplied as a new machine (Photos from customer installations). We are the manufacturer. !! Technical specifications: - Fan certified for ATEX zone 22 - Extraction area (inlet space): 2,190 × 2,350 mm - Overall dimensions: 2,295 × 2,295 × 810 mm - Fan power: 2.2 kW (EX / ATEX configuration) - Extraction capacity: 12,000 m³/h (max. 1,100 Pa) - Supply voltage: 400 V (three-phase) Frequency inverter: for smooth fan speed control via potentiometer on the control panel. Filtration: three-stage air filtration system Certification & documentation: CE, EX / ATEX, complete technical documentation Warranty: 12 months according to manufacturer standards !!! Machines available to order in various custom configurations and sizes !!! Do not hesitate to contact us.

Būklė: naujas, Gamybos metai: 2015, Factory-new machine, only used for testing purposes, machine condition is impeccable. TECHNICAL DESCRIPTION The DIGIT MAGGI through-feed boring machine is an automatic multi-head through-feed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL DATA - Number of horizontal heads: 2 - Number of vertical heads: 6 - Minimum distance between vertical heads: 165 mm - Minimum distance between horizontal heads: 320 mm - Spindle pitch: 32 mm - Number of spindles per horizontal head (left red – right black): 23 (11 – 12) - Number of spindles per vertical head (left red – right black): 11 (5 – 6) - Maximum vertical boring depth: 55 mm - Maximum horizontal boring depth: 65 mm - Maximum workpiece dimensions: 2800 x 870 x 50 mm - Minimum workpiece dimensions: 250 x 150 x 12 mm - Number of motors: 12 - Motor power per horizontal head: 2 HP (1.5 kW) Iijdpexd Ruwjfx Aatsd - Motor power per vertical head: 1.5 HP (1.1 kW) - Number of clamps: 10 - Infeed device feed rate: 57 m/min - Operating air pressure: 6-8 bar - Standard air consumption: 60 l/cycle - Maximum clamp height from the work table: 75 mm - Overall dimensions: 4150 x 1600 x 1800 mm - Worktable height: 950 mm - Package dimensions: 4300 x 1950 x 1900 mm (h)