Šaknų reduktorius

Wiedemann 1000

Sąlyga: naujas, Wiedemann Entrindungsanlagen yra šeimos valdoma įmonė, turinti dešimtmečių patirtį medienos žievinimo srityje tiek stacionarioms, tiek mobilioms reikmėms. Esame mobiliųjų žievinimo mašinų gamintojas, kurių rotoriaus angos siekia iki 100 cm. Daugiau informacijos gausite susisiekę su mumis el. paštu arba telefonu. Hsdpfx Agjtzfqboisi

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2008, Üstünkarli UDKP 160 Schnitt-/Sägehöhe: 160 mm Kettenbett: ca. 420 mm Mit Spikes im Kettenbett Inklusive Lattenbuchse und Distanzringe Hauptantriebsmotor: 75 kW Hedpfx Aoucnudegiji

Sąlyga: labai geros būklės (naudotas), Stehle S820 (automatische Gerade-Messer-Schleifmaschine). Bitte überprüfen Sie Ihren Spam-/Junk-Mail-Ordner, falls Sie innerhalb von 24 Stunden nach Absenden Ihrer Anfrage keine Antwort erhalten! Technische Daten: • Maximale Werkzeugbreite: 330 mm • Werkzeugdurchmesser für Hobelköpfe (Mindest-/Maximalgröße Messerträger): 120 – 230 mm • Schleifscheibendrehzahl: 2.850 / 5.750 U/min • Schleifen von 2 bis 12 Messern pro Kopf mittels Teilapparat möglich • Teilapparate für das Schleifen von 4, 6, 8, 10 und 12 Messern im Lieferumfang • Antriebsleistung Schleifscheibenmotor: 1,3 kW Hedpfxoq Dzkus Agiji • Freiwinkel: 10 – 35° • Kühlmitteltank: 125 Liter • Motor der Kühlmittelpumpe: 0,28 kW • Anschlusswert gesamt: 2 kW Bitte überprüfen Sie Ihren Spam-/Junk-Mail-Ordner, falls Sie innerhalb von 24 Stunden nach Absenden Ihrer Anfrage keine Antwort erhalten!

Gamybos metai: 2003, Sąlyga: naudotas, Bollegraf kūjinis malūnas AS 75/850 Hjdeg T Id Nepfx Agisi Pagaminimo metai: 2003 Galia: Pritaikymas: Įvado skerspjūvis: Rotorius- Rotoriaus plotis: 850 mm Kaina: 24.500 eurų Kontaktinis asmuo: ponas Rainer Eckerle

Sąlyga: labai geros būklės (naudotas), Multiple 150 m³ underground steel storage tanks (fire water tanks) Hjdpfx Agjfnh Tgoioi Capacity: 150,000 litres Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground firefighting water tanks in accordance with DIN 14230: The tank is equipped with a fire water suction connection according to DIN 14244, featuring an installed firefighting coupling / permanent coupling A as per DIN 14319, version Form B, without dip tube. Additionally, the tank includes a vent flange connection (DN 100) with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground. - The tank is emptied, cleaned, and externally coated with bitumen paint by us at the factory - On request, we can provide the tank with a full internal bitumen-based lining (for corrosion protection) or an internal epoxy resin coating Cost-effective delivery with our own truck is possible. Simply provide us with the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. Should you need further information, please call us or send an email to b.barth (a) barth-tank.de

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 30 200 l, bendras aukštis: 6 000 mm, vidinis skersmuo: 2 800 mm, bendras svoris: 1 400 kg, TECHNINĖS CHARAKTERISTIKOS - Talpyklos dugnas nuožulnus 2 % - Gamintojas: ALFA LAVAL - Bendras talpos tūris: 30 200 litrų - Medžiaga: nerūdijantis plienas 316 L - Vidinis apdaila: šalto valcavimo paviršius - Išorinis apdaila: šalto valcavimo - Termoreguliuojama STOGAS - Kūginis - 1 ekscentrinis kaminas priekyje Ø 200 mm Hsdpfx Agsv I A Nlsioi - 2 nerūdijančio plieno vėliavėlės - 1 termometras - 6 kėlimo žiedai APVALKALAS - 1 ovalo formos durys 310×420 mm - 1 dalinio ištuštinimo vožtuvas DN 65 - 1 jungtis lygio jutikliui DUGNAS - 2 % nuolydis su išleidimo anga - 1 visiško ištuštinimo vožtuvas su kamščiu PRIEDAI - Suderinami ir pritaikyti skystų trąšų laikymui rezervuarai - 6 mėnesių garantija - Atitinka ES standartus

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 288, Entbarker mit Zuführförderer für maximalen Stamm-Ø entweder bis 460 mm oder 600 mm, Vorschubgeschwindigkeit bis 100 m/min, Vorschneidrotor und Entbarkerrotor, der Entbarkerrotor mit Öffnung 620 mm ist NEUPRODUZIERT mit Gewährleistungszeit, inkl. Vorrichtung zum Wechseln des Vorschneidrotors. Auf den untenstehenden Fotos im derzeitigen Zustand, demontiert. Lieferzeit 3 Monate ab Bestellung. Hjdpfx Agotk N Dksioi

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 990 h, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras aukštis: 3 900 mm, įėjimo srovė: 63 A, bendras ilgis: 9 500 mm, bendras plotis: 4 500 mm, galia: 15 kW (20,39 AG), Įranga: dokumentacija / vadovas, Pelletizing plant suitable for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn straw, etc.), as well as feed materials. Hedexv Dkcopfx Agisi This is a complete system mounted on a base frame and consists of the following components: - Raw material storage container, 4m³, including agitator. This has been extended with wooden panels to approximately 3-4m³. - Intermediate screw conveyor to the hammer mill - Hammer mill, 11 kW, for shredding wood chips or other materials - Inclined mixer for material homogenization including moisture measurement, dosing unit, and level monitoring - Dosing container for press additives, feeds into the inclined mixer - Dosing screw for optimal material feeding to the pellet press (speed controlled) - Pellet press, 15 kW, including full sensor, temperature monitoring, and discharge chute - Conveyor belt to the dedusting sieve - Dedusting sieve with material discharge at 3m height The plant is designed for easy expansion with a second 15 kW press. The entire system is centrally controlled via a Siemens PLC with touch display. All operating parameters are monitored, and the press will shut down automatically in the event of a fault. Remote operation and monitoring of the press is possible via any PC. The chip dryer shown on picture 2, mounted on the wall with discharge and control system, can also be purchased. For further details, please contact us.

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim Hjdpfx Aow Sy T Hegiei

Sąlyga: naudotas, Gamybos metai: 2002, veikimo valandos: 37 000 h, mašinos/transporto priemonės numeris: 1651, rankos pasiekiamumas: 15 200 mm, keliamoji galia: 1 900 kg, vėžės plotis: 3 000 mm, Įranga: kabina, kranas, Year of manufacture: 2002 Machine number: 1651 Track width, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.0 m Grab: included Crane position: behind the cab Cab position: center Hodpjv Hwk Uofx Agiji !! Sale on behalf of a customer !!