Wenzel LH 65

Wenzel LH 65

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single point error: 3, control: Pantec Eagle Pro/3. Includes PH10M Plus probe head, PHC-2, TP200 sensor, 20-piece stylus set, calibration sphere, industrial PC, INCA 3D Premium measuring software with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. On-site inspection possible. Nwodpfx Aew H Auwogijc

Gamybos metai: 2000, Sąlyga: naudotas, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight approx. 5500 kg Space requirement approx.: m (not specified) WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000, but continuously serviced and calibrated by manufacturer Axis configuration: - Y-axis as long-travel measuring bridge: 1,600 mm - X-axis as measuring head carriage (cross travel): 1,000 mm - Z-axis as vertical measuring quill: approx. 800 mm Maximum workpiece weight / table load: approx. 2,250 kg Clearance under measuring bridge: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Features / Accessories: • Measuring table, crossbeam, and quill made from dark natural hard stone; table with 6 x 9 threaded holes for workpiece/fixture clamping • All axes are air-bearing for smooth, virtually wear-free operation; equipped with incremental scales, 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW31.351 built into worktable (controller replaced approx. 3 years ago) • WENZEL measurement software METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments), probe head model PH 10 M plus, with TP 20 probe and various probe accessories • RENISHAW probe head controller unit type PHC 10 C-3 plus, also built into the worktable • Automatic probe changer, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with infinitely variable travel speeds • Sphere standards for table setup, work table, various clamping devices, etc. Nwsdpet Hw Nyjfx Agijc Condition: Very good – generally in stock, powered for inspection. Ready for demonstration. Disassembled by a CMM specialist at the seller and reassembled here. Delivery: Ex-stock – as is, as inspected Payment: strictly net – upon receipt of invoice.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 054344, Įranga: Tipinė plokštelė prieinama, Wenzel LH 65 Įrenginio duomenys: MBX 650-MBY 1000-MBZ 500 Serijos numeris: 054344 Pagaminimo metai: 2005 Valdiklis: WPC 2030 Zondų sistema: Renishaw Keitimo tiltas: Renishaw Programinė įranga: Metrosoft CM 3.111 Programinė įranga: Quartis R10 Zondo galvutė: PH 10M PHC: PHC 10 Zondai: 2x SM25-1 Zondai: 1x SM25-2 Nwjdpfxjxr Av Ne Agiec Zondai: 1x TM25 (adapteris) DAkkS kalibravimo sertifikatas, išduotas 2025-09-05 Matavimo mašina visiškai veikianti, puikios būklės.

Sąlyga: geras (naudotas), Gamybos metai: 2003, In good technical condition and fully operational. Nwsdeu Tq Hwspfx Agioc Year of manufacture: 2003. X-axis travel: 350 mm. Y-axis travel: 250 mm. Z-axis travel: 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm x H 2305 mm. Machine weight: approx. 2600 kg.

Sąlyga: naudotas, Table length 400 mm Table width 300 mm X-travel 300 mm Y-travel 250 mm Z-travel 250 mm Machine weight approx. 1.2 t Nwsdpfevwgq Ssx Agiec Required space approx. 2000 x 1200 x 2500 mm The machine is supplied with a comprehensive range of accessories.

Sąlyga: naudotas, Gamybos metai: 2003, Wire EDM Machines / EDM Travel X: 350 mm Travel Y: 250 mm Travel Z: 256 mm Max. workpiece size X: 750 mm Njdpew Ekr Ijfx Agiewc Max. workpiece size Y: 550 mm Max. workpiece size Z: 250 mm Max. workpiece weight: 450 kg with automatic wire threading

Sąlyga: labai geros būklės (naudotas), Kärcher Model: PC 60/130 T / with oil separator kit (skimmer) Kärcher parts cleaner Production, maintenance, workshop, metal processing – automatic parts cleaners are used in a wide range of applications. These parts cleaners operate with aqueous solutions, free from solvents. The top-loader PC 60/130 T is a fully automatic parts cleaner for parts up to 600 mm in diameter, 310 mm in height, and a maximum weight of 130 kg. The cleaning process is carried out using three-dimensionally arranged flat-jet nozzles that use heated, water-based Kärcher cleaning agents, entirely free from solvents. During cleaning, parts rotate in an electrically driven turntable basket. The PC 60/130 T parts cleaner offers numerous practical features, such as an integrated small-parts drawer that reliably collects loose parts and coarse dirt particles. Equipment: - Operating hours counter - Retaining ring (stainless steel for turntable) - Swivel casters, 2 lockable - Cleaning cycle timer - Water level monitoring - Oil separator kit (skimmer) – see image 7 The oil separator (skimmer) significantly extends the service life of the cleaning solution. Once the cleaning solution settles, for example overnight, any oil added floats to the top. The skimmer can then be activated to remove this oil from the solution. Specifications Technical Data: - Pressure (bar/MPa): 1.5 / 0.15 - Flow rate (l/h): 4500 - Power rating (kW): 5.5 - Working diameter (mm): 600 - Usable height (mm): 310 - Housing/frame: Stainless steel (1.4301) - Certified (by) to CE - Heating output (kW): 4.5 - Max. temperature (°C): 80 - Adjustable cleaning time (min): 1 / 30 - Payload (kg): 130 - Sound pressure level (dB(A)): 65 Nwsdefu Ikwjpfx Agijc - Tank capacity (l): 100 - Number of electrical phases (Ph): 3 - Frequency (Hz): 50 - Voltage (V): 400 - Dimensions (D x W x H) (mm): 1080 x 1000 x 1250 Very few operating hours, as can be seen in the photo. Weight: 170 kg Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to alteration and error!) If you have further questions, we are happy to assist you by phone.

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 1 000 kg, X ašies eiga: 400 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 400 mm, bendras aukštis: 2 230 mm, bendras ilgis: 1 800 mm, bendras plotis: 1 600 mm, ruošinio aukštis (maks.): 400 mm, ruošinio plotis (maks.): 500 mm, ruošinio ilgis (maks.): 850 mm, bendras svoris: 2 500 kg, Charmilles Robofil 310 Year of manufacture: 1995 Travel paths (X/Y/Z): 400 x 250 x 400 mm Nwsdpfx Ajw Hxqnogioc Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection in X/Y/U/V/Z Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2230 mm Machine weight: 2500 kg The machine was in operation at our customer’s site until recently and is available immediately.

Sąlyga: naudotas, Gamybos metai: 2015, Trimačio matavimo staklės WENZEL. Eigos: X2000, Y1200, Z1000 mm. Pagaminimo metai: 2015. Nwjdjxu Nwljpfx Agisc

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 1 200 mm, matavimo diapazonas Y ašis: 2 500 mm, matavimo diapazonas Z ašis: 1 000 mm, Įranga: Tipinė plokštelė prieinama, For sale is a used Wenzel WP-KL coordinate measuring machine, year 2007, in excellent condition and immediately available. The machine is ideally suited for quality assurance, toolmaking, and precise metrology applications. Nsdsx H Tqispfx Agiowc General Condition The machine is in very good technical and visual condition, professionally overhauled and modernized in 2022. An on-site inspection is possible by appointment. Technical Data - Model: Wenzel WP-KL - Year of manufacture: 2007 - Serial number: LH075440 - Machine height incl. extended damper: 3,485 mm (retracted: 3,470 mm) Measuring Range & Accuracy - Measuring range (X/Y/Z): 1200 × 2500 × 1000 mm - Accuracy (MPE E): 2.6 + (L/300) Equipment - CNC control: WPC, 3 axes - Probe system: Renishaw PH10M - Scanning probe: Renishaw SP25 with Scanning Kit 2 (stylus lengths 50–100 mm) - Probe changing rack: Renishaw FCR25, 3 slots, empty PC System & Software - PC system with Windows 10 Professional - 2 × 24" TFT monitors - WM QUARTIS CNC Basic Geometry Software – Version 2025 - WM QUARTIS CNC Freeform Surface Applications – Version 2025 - WM QUARTIS CNC CAD Import Interface (STEP) – Version 2025 - USB user dongle with software license Accessories (included in package) - Small M3 stylus kit - Reference sphere - PC and controller cart with desk combination - Ergonomic hand control panel HT400 If you are interested or have any questions, please get in touch! Price: €85,000 net, negotiable for quick transactions. All information provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.