Cilindrinio šlifavimo staklės

WENDT Diatos 602

Būklė: geras (naudotas), Gamybos metai: 1988, šlifavimo ilgis: 1 000 mm, šlifavimo plotis: 550 mm, šlifavimo aukštis: 400 mm, šlifavimo disko skersmuo: 400 mm, šlifavimo ratuko plotis: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Electronic straight dressing device with compensation Vertical digital readout Nlodpfx Aeu Rqynjcpja Mounting for grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW 1435 rpm Wedge-shaped leveling pads Coolant system with universal paper band filter Complete documentation

Būklė: naudotas, Manufacturer: CINCINNATI Njdpfx Acswrpykspsla

Būklė: naudotas, Gamybos metai: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m DISKUS Vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of construction: 1969 Serial no.: 6672 --- Grinding wheels - diameter x bore per side: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc outside Ø: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Nlodst Hw N Hepfx Acpsa Vertical quill adjustment per side: approx. 150 mm Hydraulic infeed pulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed per side: (24 m/s) / 765 rpm Grinding spindle drive per side: 22 kW each Total drive: approx. 50 kW/380 V/50 Hz Total weight: approx. 7,000 kg Accessories / Special Equipment: • Workpiece rotary device for round transport discs with apertures for inserting the parts and with automatic ejection of finished parts down a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height and, if necessary, with automatic hydraulic grinding wheel infeed. • Stepless speed regulation of the rotary device according to grinding dimensions and workpiece. • Manual infeed of grinding wheels via corresponding buttons. • hydraulically swivelling dressing device (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and with automatic repositioning to effective workpiece thickness after dressing = high time savings, can be triggered manually or by timer. • Ammeter displays for both grinding spindle drives. * Central lubrication, • Mechanical height control of workpieces with machine shutdown if overheight is detected. • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is especially suitable for simultaneous, plane-parallel grinding of workpieces in large series. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Būklė: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Stroke rate 355 – 630 strokes/min Nedstycg Sepfx Acpela Feed range 0.008 – 0.4 mm/stroke Required space approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg With rack cutting attachment Change gear set Year of manufacture: approx. 1981

Gamybos metai: 1992, būklė: naudotas, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9,500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece feed and IONIC measuring control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 high mm Workpiece data: Grinding height: approx. 1.5 – 50 mm Grinding width: approx. 20 – 120 mm Vertical slide adjustment, each: approx. 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed continuously adjustable: 40 - 235 mm/sec. Grinding wheel speed (30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (per spindle): 37 kW Total drive approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes Nledpfxst Hw Nao Acpja (top and bottom infeed, dresser, and workpiece table rotation), direct input of all grinding data, and in conjunction with • IONIC measuring control no. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers corresponding infeed of the grinding wheels, continuous measurement data displayed on the monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for the drive motors and the grinding wheel speed • Gantry design for increased rigidity and improved grinding accuracy • Rotational workpiece transport with continuously variable speed control as the 4th axis • Position control device for monitoring the position height of the lower grinding wheel • 2 adjustable workpiece hold-downs at both in-feed and out-feed, with height monitoring, simple raw part stacking device, and finished part discharge via conveyor belt • Semi-inclined, side-mounted grinding wheel dressing unit with pre-programmable dressing sequence, integrated as CNC axis in the control, with safety shut-off • Large separate switch cabinet, automatic central lubrication system, advanced pneumatic setup • Large PROMATEC (F) coolant unit with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction system, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in large series, such as stamped parts, piston rings, hydraulic parts, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: net – upon receipt of invoice This represents a rare opportunity regarding both condition and price. If you require another grinding machine – especially from the manufacturer DISKUS – please send us your inquiry.

Gamybos metai: 1993, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Nlodpfxjcc D Ddo Acpja Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.

Būklė: paruoštas naudoti (naudotas), The machine is in very good condition and can be inspected on site. Technical Data – Grinding Machine Working area (mm): Height x Length x Depth 80 x 110 x 55 Nedewvgidspfx Acpsla Motor power (kW): 0.5 Spindle speed (rpm): 5000 Feed rate (mm/min): 150 Table load (kg): 20 Control system: BOSCH Accuracy: 0.005 mm, read via CNC, template grinding ratios 1:10, 1:20, or 1:50, suitable for coarse grinding. If you have any further questions, please feel free to contact me.

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Nedpfet Hww Djx Acpela Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Naudota dantračių šlifavimo staklė Niles ZSTZ 630i. Staklės visiškai veikiančios, pageidaujant galima atsiųsti vaizdo įrašą. Nlodpfjxzfugox Acpea

Būklė: geras (naudotas), Gamybos metai: 2013, Šlifavimo skersmuo: 140–355 mm Šlifavimo ilgis: 3000 mm Centro aukštis: 260 mm Mašinos svoris apie 8,3 t Reikalinga patalpa apie 8500 x 3500 mm Išorinė apvalių detalių šlifavimo staklės SA 6Ux3000 Pagaminimo metai: 1981 Nlsdpjynmpyofx Acpsa Atnaujinimas: 1 x2013 SERWEMA Didžiausias šlifavimo skersmuo su centravimo laikikliu: 140 mm Didžiausias šlifavimo skersmuo be centravimo laikiklio: 355 mm Didžiausias šlifavimo ilgis: 3000 mm Centro aukštis: 260 mm Didžiausias ruošinio svoris: 500 kg Mašinos užimamas plotas: 8500 x 3500 mm Mašinos svoris: 8500 kg