Suvirinimo sukamasis stalas, pozicionavimo stalas

WEISS CR700CAA

Gamybos metai: 1994, Sąlyga: geras (naudotas), Rivo bandsaw sharpening machine Type GA 250 Ffsdpfxspl D Hxs Ab Set

Gamybos metai: 2022, Sąlyga: naujas, Load capacity: 10,000 kg Fedpfx Ajfxgp Usb Soft Speed: 0.03–1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transmission: 800 A

Gamybos metai: 1990, Sąlyga: geras (naudotas), Used sideloader Kalmar, the machine has been well maintained For more details, see pictures Fjdpjh Et E Njfx Ab Ssft

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Ffedpfxow Sy T Hs Ab Sot Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: R14101358 (Roboter) / E14130752 (Steuerschrank), bendras svoris: 1 270 kg, keliamoji galia: 250 kg, rankos pasiekiamumas: 2 655 mm, valdiklių gamintojas: FANUC, valdiklio modelis: R-30iB, įėjimo įtampa: 400 V, FANUC industrial robot R-2000iB 250F, Year of manufacture: 01/2014 (control cabinet 12/2013). Axes: 6, Reach: 2,655 mm, Payload: 250 kg. Dimensions: Length 200 cm, Width 110 cm, Height 185 cm. Control cabinet: FANUC R-30iB. Ffsdpjtk N E Tjfx Ab Sst Complete with robot manipulator, connection cables, teach pendant, and controller. (For more details, see nameplates.) IPendant A05B-2255-C101#EGN We also offer accessories such as pedestals, spot welding guns, rotary tables, and much more. We are happy to demonstrate the robot for you. Packaging and loading included.

Sąlyga: labai geros būklės (naudotas), Motor-driven rotary-sliding table Fodpfxjif Rlbs Ab Seft Infinitely variable rotary table (indexing 0.001°) Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Longitudinal travel: W-axis = 1000 mm Condition: Very good (used)

Sąlyga: naujas, Gamybos metai: 2026, Efektyvus klijų padengimas baldų gamyboje: dylių skylėse ir galinėse grioveliuose, taip pat klijavimas rėmų, langų ir durų gamyboje: dylių skylės, įlaidų ir kaiščių sujungimai. Trumpas pristatymas: • Universalus klijų padengimo įrenginys • Taupantis laiką – paprastas – švarus • Įvairūs purkštukai ir antgaliai Fedpfx Aohnddzjb Soft • Mobilus Universalios naudojimo sritys: • Klijavimas dylių skylėse • Klijavimas grioveliuose galinėms sienelėms • Klijavimas briaunų paviršių • Klijavimas bendraminčių paviršių • Klijavimas įlaidų ir kaiščių • Dalių suklijavimas spintoms, korpusams, stalčiams • Dalių suklijavimas rėmams • Dalių suklijavimas langams ir durims • Plokščių ir masyvo komponentų apdirbimas

Sąlyga: naujas, Manufacturer: Flender Type: B4 FH 10 A Power: 11 kW Gear Ratio: 387.59:1 Input/Output Speed: 1,500 / 3.87 rpm Bolt Circle Diameter (Input): 300 mm Bolt Circle Diameter (Output): 420 mm Fodpfsg Stz Uex Ab Ssft Weight: 1,140 kg

Gamybos metai: 2021, Sąlyga: naujas, Cantilever rack, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW –: Price ex location including loading! 1 rack unit with 4 uprights €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Fedpjfivhfofx Ab Seft Of course, by omitting or purchasing additional frames, you can build longer or shorter rack units (or by varying bay spacing). This example with 4 frames is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 rack uprights, double-sided, approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 - Each with 2 x 3 adjustable arms, 1.20m, 750kg load capacity per arm - With bracing approx. 1.30m - Rack uprights double-sided approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200mm with 3 height-adjustable rack arms each - Load capacity at 600mm load center: 750kg per arm / 2250kg per upright side - With longitudinal and diagonal bracing, e = 1300mm, standard is 1.30m - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies to the stated price! - Special sizes (other bay spacings) are also available on request, but also incur a surcharge and have a longer delivery time as they must be custom-made! - If you do not specify a different bay spacing, we will deliver the rack with a bay spacing of 1.30m. - In this case, the length for a rack row with 4 uprights (3 bays) is approx. 4m. - Delivered with all bolts and nuts (shipping within Germany via parcel service directly from Würth), excluding floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 700 mm, pjūklo pavara: 15 000 W, servo variklio galia: 11 000 W, Pilnai atnaujinta / kaip nauja mašina su nauja elektros instaliacija nauja Siemens S7 valdymo sistema Ffjdev Diy Aspfx Ab Sjt Užbaigimas pagal užsakymą Trumpinimo automatas su kreidos linijos atpažinimu Medienos skerspjūviai 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Pjūklo disko skersmuo 650/700 mm Padavimo greitis 120 m/min Pjūklo variklis 15 kW Servo pavara SEW 11,00 kW keitiklis