Dvigubas kuro degiklis

Weishaupt GL30/2-A Zweistoffbrenner ZM

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), air-cooled process chiller: refrigerant R32 Cooling capacity 72 kW at 7/12°C, integrated P3 pump, built-in 410 l tank, winter package for outdoor installation down to -25°C ambient temperature, including speed-controlled fans Hsdpfx Aljf H A Eyswot large Dixell display with protective cover,

Būklė: geras (naudotas), Roots-type Booster Blower Manufacturer: Leybold Model: RUVAC RA 9001 Hjdpfx Ajd Hh Nvelwet Condition: Fully overhauled, tested and serviced, available from stock Includes: New paintwork, motor bearing renewal, electrical inspection Warranty: Up to 12 months Delivery time: From stock

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, slėgis: 16 juosta, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, temperatūra: 400 °C, įėjimo įtampa: 6 000 V, sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 1 500 aps./min, aušinimo tipas: oras, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed and never commissioned, still covered by manufacturer’s warranty. Following a revision of the long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator, complete as per original OEM supply, is now available for sale. The unit is NEW, manufactured and fully tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in a controlled indoor environment. Immediate availability allows you to bypass the usual production lead times, which for this kind of equipment are typically 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual casing turbine (Steam Part A + Steam Part B) - 3-shaft integrated gearbox (2 pinions + central gear) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - 3-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, prepared for parallel grid operation Systems included: - Integrated oil system in base frame - Main mechanical oil pump and auxiliary electric oil pump - Local control panel on skid - Control and protection panel equipped with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration plants Hsdpjyidvdofx Alwet - Process steam energy recovery - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Possibility of installation and commissioning with manufacturer support Possible fields of application: - Biomass and waste-to-energy plants, for production of electricity and process steam, with immediate unit availability — no multi-year production lead times - Industrial cogeneration (CHP) in plants with continuous process steam usage (paper, food, chemical, and manufacturing industries) - Revamping/repowering of existing plants, as a fast-track alternative to new OEM supplies with 24–36 month delivery times Price: Upon request. Further technical information and documentation available upon request.

Būklė: naujas, Gamybos metai: 2025, TR serija yra lazerinė vamzdžių pjovimo staklė, skirta sunkių vamzdžių apdorojimui. Naudojama tradicinė horizontali lova, didelė keliamoji galia, mobilios portalinės konstrukcijos sistema leidžia valdyti įvairias sudėtingas pjovimo sąlygas. Platus pritaikymas statybinių sijų, vamzdynų apdirbimo ir plieninių konstrukcijų pramonėje. Didelių vamzdžių ir profilių lazerinio pjovimo staklės. Maksimalus diametras: H profilis iki 12 metrų ilgio vamzdis ar profilis Lazerių galvutė parenkama pagal medžiagos storį. Galia: 3–12 kW Maksimali žaliavos ilgis: 12 500 mm Apvalaus vamzdžio diametras: Φ70–Φ680 mm Kvadratinio vamzdžio kraštinė: □70×70–□480×480 mm Maksimalus pagreitis: 0,5G Kaina: EXW (sandėlis Europoje), įskaičiuota pakrovimas į sunkvežimį. Transportavimas, montavimas, paleidimas, apmokymai ir metinės priežiūros sutartys – pagal atskirą užklausą už papildomą mokestį. Montavimą ir apmokymus visada atlieka aukštos kvalifikacijos mūsų serviso komanda trijose Europos šalyse: Nyderlanduose, Vokietijoje, Rumunijoje. Oficialus pardavėjas: CNC Top Ten bv Hjdemxl S Aopfx Alwet Coevorden, Nyderlandai

Būklė: labai geros būklės (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, 1 naudotas garo katilas ----- - su gofruotu degimo vamzdžiu ir užlenktais dugnais - Hjdsxtndnepfx Alwet Gamintojas: STANDARD Šildymo paviršius apie: 240 m² Galingumas: 13,4 t/val. Maks. darbinis slėgis: 14,0 bar Bandomasis slėgis: 18,2 bar Vandens tūris apie: 18 160 l Pagaminimo metai: 1988 Įrengtas su Saacke gamtinių dujų degikliu, tipas DG 80, dujų reguliavimo linija, valdymo spinta, maitinimo vandens siurblys ir esamomis stambiomis ir smulkiomis armatūromis.

Gamybos metai: 2002, būklė: nepatikrintas (naudotas), Robot No control panel + connecting cables Used, untested robot. No teach pendant. Not tested. Hsdpfxsgu U Its Alwet

Būklė: naudotas, Vertical Multistage High-Pressure Centrifugal Pump GRUNDFOS As-new pump, however, a part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Hedpfx Asfupadslwot Power supply: 400 Volt, 50 Hz Power: 3 kW - 9-stage pump assembly - made from stainless steel 1.4401 - The as-new pump was used as a spare part donor, but several new pump chambers are included - a part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packed in original wooden crate Pump dimensions LxWxH: 1100 x 250 x 300 mm Shipping crate dimensions LxWxH: 1400 x 330 x 340 mm Weight including shipping crate: 85 kg As new condition Not a submersible or immersion pump.

Gamybos metai: 1985, būklė: dilaminuotas dirbtuvėje (naudotas), REFORM type AR 10 model 40H Surface Grinding Machine Year of manufacture: 1985 30 kW grinding motor Control system: Modicon 6-stage magnetic control Magnet size: 1000 x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pcs Grinding motor feed: Infinitely adjustable from 0.01 mm to 0.1 mm Hjdpfed E Np Ejx Alwst Hydraulic oscillation drive New supply cables between machine and control cabinet

Būklė: labai geros būklės (naudotas), Waelzkolbenpumpe (Roots blower) Manufacturer: Pfeiffer Hodpfodiwccjx Alwot Model: Okta WKP 2000 A M Pumping capacity: approx. 2065 m³/h Warranty: 12 months

Būklė: geras (naudotas), The Bystronic Glass Cutting Line for Split Belt Dimensions (maximum 3300 x 2550 mm) Service / spare parts by Hegla, who have acquired Bystronic. • 1 Bystronic KTR tilting table, serial no. E9801016-1: - Tilting with integrated hydraulics, roller drive for automatic transport of the glass to the cutting table. Hedpfot Et Icsx Alwjt • 1 fully automatic float glass cutting table: - Type: XYT 972, serial no. E980016-2 - Also capable of shape cutting, waste optimisation, PC Terra - Maximum dimensions 3300 x 2550 mm - Glass thicknesses 2–15 mm - With belt conveyor • 1 breakout table with breaking bars and air cushion - Serial no. E980016-4