Sukamasis stalas

Weinmann OPTIMAT WTW110/12N + PROFI WTX110/12

Sąlyga: naudotas, New diesel generator set, generator, emergency power unit RTE Model 50kVA – identical to DAEWOO DAGFS 50 New, unused, year of manufacture 2025 Rated power 50 kVA Continuous power max. 40 kVA Standby power 55 kVA / 44 kW Rated current 33 amps Voltage 400/230 volts, 50 Hz / 230 volts, 50 Hz Fuel consumption 99-liter tank capacity for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load approx. 11 liters/hour Hnjdpfx Afjxlkq Uj Isg Fuel consumption in standby approx. 4 liters/hour Drive engine 4-cylinder in-line diesel engine RICARDO ZH4105ZD Engine output at 1500 rpm: 45 kW Engine output at 1800 rpm: 55 kW Displacement 1500 cc Tank capacity 99 liters - Simple and compact design with sound-insulated metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 amp sockets (3-pin, 230 V) - 1x CEE 16 amp socket (5-pin, 400 V) - Terminal strip for cable connection for external consumers, e.g., construction site power distributors - ATS module for mains backup operation, for automatic emergency power switching in the event of a power failure Space requirements L x W x H: 2150 x 950 x 1200 mm Weight: 900 kg Unopened stock machine

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), This is a complete plant for house construction. Prices for each item are listed individually. Comprising the following elements (see attached document): Images will follow and are already included in the attached document. Table 1 (Positioning and clamping the stud frame) €34,500 • Adjustable longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Table 2 (Placing and fastening the first sheathing layer) €25,300 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 3 (Placing the second sheathing layer, fastening, and flipping the element onto the next table) €35,650 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity • Hydraulic turning device Table 4 (Installation of electrical systems and insulation) €34,500 • Cross transfer with rollers and sheathing • Table cross-travel function • Connections for compressed air and electricity • Hydraulic turning device Table 5 (Placing the first sheathing layer and fastening the second side) €32,775 • Longitudinal conveyor with 3 hinged belt conveyors • Cross transfer with rollers • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 6 (Placing and fastening the second sheathing layer) €28,750 • Longitudinal conveyor with 3 hinged belt conveyors • Pneumatic cross-clamping • Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 • Longitudinal conveyor with 3 hinged belt conveyors • Hydraulic tilting unit • Table cross-travel unit • Overhead guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 (placing the first sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 (placing the second sheathing layer) €13,800 Hnjdpeu D Amgjfx Af Ieg • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 (placing the first sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 (placing the second sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Wall storage 1: 12 m long, 24 bays €11,500 Wall storage 2: 12 m long, 20 bays Vacuum lifter with column-mounted slewing crane €9,200 1 traverse, 2 t Abus €20,125 1 traverse, 2 t

Gamybos metai: 2005, Sąlyga: naudotas, HIT mechanisation for KVH and BSH production Hnodpfjpiurmjx Af Ijg for components up to width 600 mm, height 300 mm, length 18 m consisting of various parts available individually or as a complete package - Layer cross pusher - Various cross conveyors - Workpiece roller conveyors - Heavy-duty roller conveyors - 5 lifting tables each mounted with 2 cross conveyors on transfer trolleys - Stacking machine - Control cabinets - Roller tracks - Travelling timber crosscut saw with waste disposal

Sąlyga: paruoštas naudoti (naudotas), Rundholzannahme mit Wurzelanlaufreduzierer und Entrindungsmaschine. Folgende Komponenten sind enthalten: - Rundholzauflage mit Vereinzelung und Rundholzentstapler Hodpfxetrd Hfo Af Isng - Wurzelanlaufreduzierer Typ Bruks RR1000 - Entrindungsmaschine Typ Cambio 70-66 - Auslaufförderer für Rundholz mit Rundholzausschleuser

Sąlyga: geras (naudotas), Manufacturer: MBT Model: MV-250 S Motor: 5.5 kW Hsdpfx Ashzr U Iof Isng Hopper size: 780 x 600 mm Unit dimensions: 3500 x 1000 x 2200 mm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Vertical double-sided wood press by C.O.P.E. Two working areas, each measuring 620x110 cm. Hnjdoudy A Njpfx Af Iog

Sąlyga: labai geros būklės (naudotas), Rąstų žievinimo įrenginys VK450 2RE. Įrengtas dviem rotoriais. Vienas yra kelmo frezos rotorius. Kitas – žievės šalinimo rotorius. Min-max rąsto diametras 8–45 cm. Minimali rąsto ilgis 3 m. Komplekte su originaliu VK centrinančiu konvejeriu. Bus parduodamas po kapitalinio remonto. Hodpjulv Hzefx Af Isng

Gamybos metai: 2011, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL Tilt Destacking Unit - SH/4t - 1.75x1.75x6.00m - 4t – minimum length 2.50 m, semi-automatic package separation. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions 1.75 x 1.75 x 6.00 m, max. stack load 4 t, shortest wood length 2.5 m. 2. HOWIAL Lamella Separator VE 1 for cross-cut saw. With pneumatically controlled fingers for material marked after defect detection, deposited on the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. 4. Gann DMT-8 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. System integrated in a large control cabinet, complete with inkjet printer. 5. HOWIAL Cross-Cut Saw AS-30 B Hsdpfx Aei Ezx Djf Ieng Pneumatically controlled under-table cross-cut saw with 2 automatic feed units, automatic cross-cutting. Special photoelectric cell control for detection of fluorescent marking lines. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Feed speed max. approx. 60 m/min 6. HOWIAL Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/sec 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. cross transfer, equipment for the finger jointing automation. Driven by round belts, all rollers driven. Cross removal via chain conveyor. Ejector ± moisture, right side. Adjustable transport speed 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Infeed length from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger profile 15/15 Spindle speed approx. 6000 rpm Total connected electrical load approx. 62 kW Machine weight approx. 9 tons. OEST comb gluing system for PU adhesives Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with De-stacking Driven roller conveyor with automatic ejector and hydraulically operated de-stacking arms. Technical data: H: 920 mm L: approx. 12,000 mm 10. Safety Fencing including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385. Support distances freely adjustable, integrated measuring scale, automatic calculation of support distances in software. Fully automatic test sequence via mouse click on PC (not included). Alternatively, test sequence can be triggered from control panel. Connects to any standard PC or laptop (Win 2000/XP) using provided RS232 serial cable. Fully automatic data acquisition and test report generation in MS Excel with graphical presentation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISASSEMBLY

Gamybos metai: 2000, Sąlyga: geras (naudotas), EWD Combimes apkantavimo linija. Pagaminimo metai 2000, tipas DK90-TL. Medžio padavimas iš kairės. Didžiausias apkantavimo plotis 500 mm, didžiausias storis 120 mm. 90 kW variklis. Takto dažnis su 4,0 m ilgio medžiu apie 18 vnt./min. Komplektuota su originalia EWD valdymo sistema. Pristatymas nuo kaupiklio konvejerio prieš atskyrimą iki skutelių separatoriaus įskaičiuotas. Įrenginys pilnas, geros būklės. Hedpfexcwvxox Af Iong

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Hsdpew Sy T Hjfx Af Iong Location: Nattheim