Obliavimo įrenginys su krovimo sistemomis

Weinig Hydromat 22 B / 8 Wellen

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Complete Weinig planing line consisting of: - Package infeed - Tilt destacking - Batten separation - Cross conveyor with waste ejection - Transfer to twin band saw - Singling station before planing machine infeed - Throughfeed cross-cut saw - Infeed to the planer - Weinig 22 B planer with 8 spindles, frequency-controlled electronic feed up to 80 m/min In 2023, the planer was fitted with a new frequency-controlled feed and new table and wear plates. - Planer outfeed - Weinig stacking unit with batten magazine - Also equipped with an Almab stacking unit Dusdpfx Abswvqvbo Ssl The entire planing line is fully mechanized. Specifications: - Wood length: 2 – 6.10 m - Wood thickness: 10 – 120 mm - Wood width: 40 – 220 mm - Package size input: 1.20 x 1.30 m - Package size output: 1.20 x 1.20 m (W x H) Well-maintained plant. Regularly serviced.

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Labai gerai išsilaikiusi kompaktiška džiovinimo kamera MÜHLBÖCK, modelis QLSF-2x1,2-3x1,2-13, pagaminta 2004 m. Pilnai su valdymo sistema. Šilumos poreikis – 330 kW. Įranga vis dar veikia! Galimas pilnas transportavimas sunkvežimiu. Nuimti reikia tik priešsvorį. Esant poreikiui, galima pridėti ir atitinkamą šildytuvą. Demontavimą ir transportą galima atlikti savarankiškai. Statybos matmenys – žr. pridėtą brėžinį. Djdpfx Aoxt Hwaeb Soul

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Set for producing finger-joint connections for medium and large-scale production. The machine is technically efficient and in good condition. The set includes several tool kits. Characteristics: – Industrial set with one tenoner. Batch feeding under operator supervision enables processing of lower grade raw material as well, – Operation controlled by microprocessors (automatic control), – Batch rotation after each operation on a rotary table (straight finger-joint connection) or tilting the batch rearward (furniture joint on a line; unique GOMA solution), – The set includes an automatic loading station for the press, – Possibility to use mid-cutting on the press, TENONER WITH FEED TABLE Specification Values Milling spindle diameter 50x210 mm Spindle speed 6000 rpm Motor 18.5 kW Tool dimensions 250x160 mm Saw spindle for end trimming Special chipper 300x8 mm Motor 6 kW / 3000 rpm Stepless feed table Working width x height 600 x 30-160 mm Glue nozzle outline according to tool FC-10 PZ6/2 PRESS Specification Values Board width 30-160 mm Board thickness 20-70 mm Duodpslu D Tfjfx Ab Sel Finished board length 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic pump 3 kW / 140 bar

Sąlyga: naudotas, Obliavimo ir profiliavimo automatas Weinig Powermat 700 skirtas medienos keturpusiam obliavimui ir profiliavimui su CNC valdymu. Prieinamas pagal susitarimą nuo 2026 m. kovo mėn. Įrenginio pardavimas galimas tik su sąlyga, jei bus realizuota briketavimo presas (ref. Nr. 800055) arba visas obliavimo cechas (ref. Nr. 100101). Velenų skaičius: 6 Velenas 1: apačioje / 7,5 kW / 6 000 aps./min. Velenas 2: dešinėje / 15 kW / 8 000 aps./min. Velenas 3: kairėje / bendras variklis su #2 / 8 000 aps./min. Velenas 4: viršuje / 11 kW / 8 000 aps./min. Velenas 5: viršuje / 7,5 kW / 8 000 aps./min. Velenas 6: apačioje / 7,5 kW / 8 000 aps./min. Darbinis plotis: 230 mm Darbinis aukštis: 160 mm Veleno skersmuo: 40 mm Padavimas: 40 m/min / 5 kW Nivelyrinio stalo ilgis: 1 200 mm Valdymas: Memory Plus Dusdpfx Aexpuufjb Sel

Sąlyga: paruoštas naudoti (naudotas), Forklift Manufacturer: Jumbo Model: J60 DC12 Diesel Year of manufacture: 1994 Duedjvtwuajpfx Ab Sol Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Approx. 25,000 operating hours For sale due to conversion to wheel loader All service and lubrication intervals have been carried out as documented in the inspection log! All filters (hydraulic, fuel, torque converter, air) replaced annually. Engine oil filter and oil changed every 250 operating hours. Only B0 diesel fuel has been used (no B7). Immediately available – fully functional Location: Austria, near St. Pölten

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Dujdpfx Abjhw Ng Io Ssl Work table inclined at 8° Technical specifications of the saw unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400/50 Hz. TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for bundle weight up to 80 kg Maximum push feed system speed: 90 m/min Pneumatic lift of pusher at the end of the cutting cycle and overhead return. Data input management: 12-inch TOUCH SCREEN controller (800x600 Pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycle (pattern) and enter directly at the controller Transfer cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of the stock length Partial optimization without measuring the panel length Cutting cycle with 3 optimization options (maximum length, sequence, and board order) 1000 cutting lists with 11 sizes each, or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length measurement via photocell Cutting cycle: with 6 optimization criteria (longest length, sequence, board order, volume, minimal waste, and priority length) "OPTI PLUS" package: overall optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during timber mapping Marking with fluorescent chalks (Note Ð Only available in combination with ZA250) Pneumatic side clamping device

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Μηχανή επικόλλησης ακμών Hebrock F5 με σύστημα ελέγχου PLC, καζάνι ταχείας θέρμανσης με επικάλυψη, χωρίς απαιτήσεις συντήρησης, με προκαταρκτική ρύθμιση για γρήγορη αλλαγή του δοχείου κόλλας. - Οθόνη αφής 10" - Μέγιστο πάχος ακμής 3mm Dodpfx Abswyu Rwj Soul - Ελάχιστο μήκος τεμαχίου 160mm - Ταχύτητα προώθησης 7m/min - Έτοιμη για λειτουργία σε περίπου 3,5 λεπτά - Μέγιστη κατανάλωση ισχύος 7,4kW - Ηλεκτρική σύνδεση 400V/3φ/50Hz - Ύψος τραπεζιού 900mm - Διαστάσεις μηχανήματος 4300x1300x1400 mm - Βάρος περίπου 900Kg Εξτρα εξοπλισμός • Κεφαλή προ-φρεζαρίσματος Whispercut, ύψος τεμαχίου 50mm • Κεφαλή συνδυασμένης κοπής • Ακτίνα για στρογγύλεμα γωνιών R = 2mm • Στρογγύλεμα γωνιών ακτίνας R = 2mm • Συσκευή ταχείας αλλαγής για μοτέρ στρογγυλοποίησης γωνιών • Ξέστρο πολλαπλών ακτίνων R2/R1 • Μονάδα ψεκασμού διαχωριστικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Ψεκασμός προστασίας ακμών • Υποδοχή για φρεζαριστική μονάδα και ξέστρο προφίλ ακτίνας • Πνευματική ρύθμιση 3 σημείων • Πολυεργαλείο (R2/R1/λοξογωνιά) • Εσωτερικός φωτισμός LED

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse, horizontally shiftable by 180° - Console table with vacuum clamps - Lift table (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operating panel Djdocggy Sopfx Ab Ssul - External roller conveyor for transporting the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belt for 90° transfer of sheets - Operating capacity (cycles/min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load Kw: 10

Sąlyga: geras (naudotas), Juostinių pjūklų linija dideliems rąstams 1. Rąstų transporteris Duedpfeikvlisx Ab Sel 2. Buferinė rąstų platforma ir vieneto padavėjas 3. Rąstų transporteris ir centrinis padavimas su vartytuvu 4. Söderhamn AKE 245A dvigubas redukcinis juostinis pjūklas (ARI 6 peilių galvutės) 5. Lentų atskyrėjas su kaladėlių vartytuvu 6. Kaladėlių šoninis padavimas 7. Kaladėlių padavimas 8. ARI BKR-600 9. ARI DS-75 daugiapjūklė 10. ARI KT-52 kraštuotuvo linija Kaina: 2 100 000 SEK, esamos būklės vietoje. Linija pilnai komplektuota, bet ne visas konvejeris apatiniame aukšte. Bruks 1503M kaladėlių smulkintuvas. Nėra elektros paskirstymo spintų energijos (nėra PLC programinės įrangos). Galima išmontuoti ir pakrauti UJ Trading AB. Lentpjūvė randasi Švedijoje.

Sąlyga: geras (naudotas), Edging Line / Edging Automatic / Double Edger with Automatic Measurement and Adjustment EWD Esterer Type: DK90 TL 1000 Year of Manufacture: 1994 Maximum Pass-Through Width: 1000 mm Maximum Cutting Height: 120 mm 2-blade, variable Combimes Measurement System with S-Conveyor with Crosscut Saw with Esterer ARS TR Infeed Duedpfovg Ecfox Ab Ssl with 2-lath Chip Separator new saw shaft, new bearings and new chains installed 3 years ago. Includes: External feed for boards to DK90 with tilt destacking with cross conveyor